I am using mandrake 9 and installing windows only for the ADSL connections which bothered me a lot to never beeing able to use it on linux. I have a problem using PPPoE, I followed the note posted on the website, and these are the details:
The drivers compiled from the cvs snapshot [root@serv1 doctor]# lsmod Module Size Used by Tainted: P tun 4196 0 ppp_synctty 5952 0 (autoclean) n_hdlc 6368 0 (autoclean) printer 6944 0 (unused) msdos 5364 0 (autoclean) vfat 9588 0 (autoclean) fat 31864 0 (autoclean) [msdos vfat] isofs 25652 0 (autoclean) inflate_fs 17892 0 (autoclean) [isofs] udf 85472 0 (autoclean) cisco_ipsec 376416 0 (unused) lp 6720 0 (autoclean) (unused) parport 23936 0 (autoclean) [lp] sg 31276 0 (autoclean) (unused) st 26740 0 (autoclean) (unused) sr_mod 15096 0 (autoclean) (unused) sd_mod 11788 0 (autoclean) (unused) scsi_mod 90372 4 (autoclean) [sg st sr_mod sd_mod] ide-cd 28712 1 (autoclean) cdrom 26848 0 (autoclean) [sr_mod ide-cd] floppy 49340 0 (autoclean) nfsd 66576 0 (autoclean) lockd 46480 0 (autoclean) [nfsd] sunrpc 60188 0 (autoclean) [nfsd lockd] ppp_async 7456 0 (unused) ppp_generic 20064 0 [ppp_synctty ppp_async] slhc 5072 0 [ppp_generic] af_packet 13000 0 (autoclean) 3c59x 27184 1 (autoclean) supermount 14340 2 (autoclean) sb 7668 0 sb_lib 34958 0 [sb] uart401 6628 0 [sb_lib] sound 55732 0 [sb_lib uart401] soundcore 3780 0 [sb_lib sound] usb-ohci 18216 0 (unused) usbcore 58304 1 [printer usb-ohci] rtc 6560 0 (autoclean) ext3 74004 2 jbd 38452 2 [ext3] [root@serv1 doctor]# ./speedtouch-doctor.sh You are using linux kernel version 2.4.19-16mdk Support for USB is OK Preliminary USB device filesystem is OK OHCI support is OK /dev/ppp is OK HDLC support is OK HDLC support is OK (no bug) pppd version 2.4.1 You are using pppd version (untested) No existing PPP connection... trying to make one (please wait) using channel 9 Unknown option '1' -> Ignored Using interface ppp0 Connect: ppp0 <--> /dev/pts/4 Script /usr/local/sbin/pppoa3 -s -m 1 -c -vpi 0 -vci 35 finished (pid 19787), status = 0xff00 Modem hangup Connection terminated. PPP: very bad ... usermode driver just crashed (I think this is normal, because I am not using PPPoA, which it is default for the doctor test) as root: /home/user/cvs/speedtouch/src/modem_run -m -v 2 -f /usr/share/speedtouch/mgmt.o /usr/local/sbin/pppoa3 -b -c -vpi 0 -vci 35 cat /var/log/messages Nov07 28 :14: 42serv 1kernel: hub.c: USB new device connect on bus1/2, assigned device number8 Nov07 28 :14: 42serv 1kernel: usb.c: USB device 8 (vend/prod0 x6b9/0x4061) is not claimed by any active driver. Nov07 28 :14: 46serv 1/etc/hotplug/usb.agent: ... no modules for USB product6 b9/4061/200 Nov07 28 :15: 22serv 1modem_run[19458]: modem_run version1 . 1started by root uid0 Nov07 28 :15: 22serv 1modem_run[19458]: Found ALCATEL SpeedTouch USB modem Nov07 28 :15: 22serv 1modem_run[19458]: Best offset 6463 with probability100 % Nov07 28 :15: 22serv 1modem_run[19458]: Best offset 526179 with probability100 % Nov07 28 :15: 24serv 1kernel: usb_control/bulk_msg: timeout Nov07 28 :15: 24serv 1kernel: usbdevfs: USBDEVFS_BULK failed dev 8 ep0 x 85len 512 ret -110 Nov07 28 :15: 24serv 1modem_run[19458]: BLOCK 1: 991 bytes uploaded : OK Nov07 28 :15: 25serv 1modem_run[19458]: BLOCK 2: 511 bytes downloaded : OK Nov07 28 :15: 26serv 1modem_run[19458]: BLOCK 3: 526187 bytes uploaded : OK Nov07 28 :15: 26serv 1modem_run[19458]: Downloaded in1413 . 090000ms Nov07 28 :15: 26serv 1modem_run[19458]: BLOCK 4: 511 bytes downloaded : OK Nov07 28 :15: 27serv 1modem_run[19458]: Modem reference :3 VE1830STGGA71 (changed by me) Nov07 28 :15: 43serv 1modem_run[19459]: Received interrupt, len =6 Nov07 28 :15: 43serv 1modem_run[19459]: Sending a signal to notify the adsl up state Nov07 28 :15: 43serv 1modem_run[19458]: ADSL synchronization has been obtained Nov07 28 :15: 43serv 1modem_run[19458]: Modem State Nov07 28 :15: 43serv 1modem_run[19458]: ADSL line is up ( 2656kbit/s down | 512 kbit/s up) (this number exceeds 3.2 MBit/s in windows, but it does not matter) Nov07 28 :19: 19serv 1pppoa3[19550]: pppoa 3version1 . 1started by root (uid0 ) Nov07 28 :19: 19serv 1pppoa3[19550]: Control thread ready Nov07 28 :19: 19serv 1pppoa3[19553]: host --> pppoa 3--> modem stream ready Nov07 28 :19: 19serv 1pppoa3[19560]: modem --> pppoa 3--> host stream ready Nov07 28 :19: 19serv 1pppoa3[19560]: Error reading usb urb Nov07 28 :19: 19serv 1pppoa3[19550]: Woken by a sem_post event -> Exiting Nov07 28 :19: 19serv 1pppoa3[19550]: Read from usb Canceled Nov07 28 :19: 19serv 1pppoa3[19550]: Write to usb Canceled Nov07 28 :19: 19serv 1pppoa3[19550]: Exiting Nov07 28 :19: 19serv 1/etc/hotplug/net.agent: NET unregister event not supported Nov07 28 :19: 19serv 1/etc/hotplug/net.agent: invoke ifup tap0 [root@serv 1src]# pppoe -V Roaring Penguin PPPoE Version3 .5 [root@serv 1src]# pppd --version pppd version2 .4.1 [root@serv 1log]# lsusb Bus 001 Device001 : ID0000 :0000 Bus 001 Device008 : ID06 b9: 4061Alcatel Telecom Speed Touch ISDN Any help? Thank you in advance. Pleae, in english only. ------------------------------------------------------------- Get a reliable free email for life at gawab.com Click here now --> http://www.gawab.com Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
