> Dec  9 20:45:01 localhost modem_run[412]: modem_run version 1.1 started
> by root uid 0
> Dec  9 20:45:01 localhost modem_run[412]: Found ALCATEL SpeedTouch USB
> modem Dec  9 20:45:01 localhost modem_run[412]: Best offset   2756 with
> probability 100%
> Dec  9 20:45:01 localhost modem_run[412]: Best offset 523428 with
> probability 100%
> Dec  9 20:45:03 localhost kernel: drivers/usb/core/message.c:
> usb_control/bulk_msg: timeout
> Dec  9 20:45:03 localhost kernel: usbfs: USBDEVFS_BULK failed dev 2 ep
> 0x85 len 512 ret -110

This one is OK.

> Dec  9 20:45:03 localhost modem_run[412]: BLOCK1 :    991 bytes
> uploaded : OK
> Dec  9 20:45:03 localhost modem_run[412]: BLOCK2 :    511 bytes
> downloaded : OK
> Dec  9 20:45:05 localhost modem_run[412]: BLOCK3 : 523436 bytes
> uploaded : OK
> Dec  9 20:45:05 localhost modem_run[412]: Downloaded in 1917.044000 ms
> Dec  9 20:45:05 localhost modem_run[412]: BLOCK4 :    511 bytes
> downloaded : OK
> Dec  9 20:45:15 localhost modem_run[412]: Modem reference : 3EC18607CHAB01
> Dec  9 20:45:33 localhost modem_run[433]: Received interrupt, len = 6
> Dec  9 20:45:33 localhost modem_run[433]: Sending a signal to notify the
> adsl up state
> Dec  9 20:45:33 localhost modem_run[412]: ADSL synchronization has been
> obtained
> Dec  9 20:45:33 localhost modem_run[412]: Modem State
> Dec  9 20:45:33 localhost modem_run[412]: ADSL line is up (608 kbit/s
> down | 160 kbit/s up)
> Dec  9 20:45:33 localhost modem_run[433]: Error reading interrupts

This one is also ok.  It is kind of my fault: I fixed a bug in the kernel, and the bug
fix now makes visible a flaw in the modem_run program.  modem_run releases
an interface on which it submitted an urb without retiring the urb first.  It used
to be able to get away with this.  But now the kernel cancels the urb automatically.
When modem_run sees that the urb has been cancelled it prints out
"Error reading interrupts" and then resubmits the urb.  That is the reason for the
next message:

> Dec  9 20:45:33 localhost kernel: usbfs: process 433 (modem_run) did not
> claim interface 0 before use

When modem_run submits the urb, it has not claimed the interface (it just
released the interface, remember), and the kernel kindly claims it automatically,
but prints this warning message.  Anyway, it is all harmless.

> but calling pppd call adsl is OK.
> May i use the latest cvs version of modem_run ?

I don't think that will make any difference.  I submitted a patch that makes
modem_run shut up about this stuff, but I don't think it got in.  In any case,
these messages are harmless.

All the best,

Duncan.


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe

        

Reply via email to