Is anybody using pppoatm with an alcatel Speedtouch in Germany with T-DSL ?

I have the following symptoms:

1. modem_run  alcaudsl.sys runs fine, modem syncs

2. when running pppd call myProvider I get

        Dec 12 00:42:03 beaureve pppd[2083]: pppd 2.4.1 started by root, uid 0
        Dec 12 00:42:03 beaureve pppd[2083]: speed 2 not supported
        Dec 12 00:42:03 beaureve pppd[2083]: using channel 6
        Dec 12 00:42:03 beaureve pppoa3[2084]: PPPoA3 version 1.1 started by root (uid 
0)
        Dec 12 00:42:03 beaureve pppoa3[2084]: Control thread ready
        Dec 12 00:42:03 beaureve pppoa3[2084]: Modem found!
        Dec 12 00:42:03 beaureve pppd[2083]: Using interface ppp0
        Dec 12 00:42:03 beaureve pppd[2083]: Connect: ppp0 <--> /dev/pts/0
        Dec 12 00:42:03 beaureve pppoa3[2086]: ppp(d) --> pppoa3 --> modem  stream 
ready
        Dec 12 00:42:03 beaureve pppoa3[2087]: modem  --> pppoa3 --> ppp(d) stream 
ready
        Dec 12 00:42:04 beaureve pppd[2083]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> 
<pcomp>]
        Dec 12 00:42:31 beaureve last message repeated 9 times
        Dec 12 00:42:34 beaureve pppd[2083]: LCP: timeout sending Config-Requests

3. It seems that pppd does not find anyone to talk to. In fact when I
  replace in /etc/ppp/peers/myProvider the line

        pty "/usr/local/sbin/pppoa3 -m 1 -c -vpi 1 -vci 32 -v 0
  by

        pty "sleep 30"

  I get the exact same results

4. Sometimes (after a reboot) I see something worrying:
        Dec 11 18:32:23 beaureve pppoa3[3893]: Cell had wrong VPI(191)/VCI(32) (OAM?) 
PTI=0x01


5. I am puzzeled by the fact the the module pppoatm is not loaded. I
  did load it manually but it makes no difference. Aren't we doing
  ppp-over-atm here ?

6. Is it a problem if the ISDN system is running (ipppd running) ? It
  actually makes not difference though.
 
7. Here is my configuration:
        Alcaltel Speedtouch USB
        Linux kernel 2.4.17
        pppd version 2.4.1
        DSL Provider: Deutsche Telekom
        Internet Provider: Tiscali

8. loaded modules
        isdn_bsdcomp            5680   0 
        usb-uhci               21376   0  (unused)
        usbcore                49472   1  [usb-uhci]
        n_hdlc                  6224   1 
        ppp_synctty             4832   1 
        ppp_generic            14704   3  [ppp_synctty]
        slhc                    4608   0  [ppp_generic]
        vmmon                  18112   0  (unused)
        ipt_state                608   1  (autoclean)
        ip_conntrack           13248   1  (autoclean) [ipt_state]
        ipt_LOG                 3120   1  (autoclean)
        iptable_filter          1728   0  (autoclean) (unused)
        ip_tables              10560   3  [ipt_state ipt_LOG iptable_filter]
        sg                     24032   0  (unused)
        ide-scsi                7568   0 
        cdrom                  28896   0  (unused)
        scsi_mod               80480   2  [sg ide-scsi]
        rtc                     5536   0  (autoclean)
        reiserfs              153728   1  (autoclean)
        apm                     9568   1 
        hisax                 178032  10 
        isdn                   90080  12  [isdn_bsdcomp hisax]


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe

        

Reply via email to