I can only tell you that I am suffering from the same problems. My motherboard is the GA-7VRXP and what the user's manual tells me is that the USB 2.0 uses VIA VT6202. I also use the patched version of CVS_19_11_2002
that has the 'e option' included for modem_run. I get lots of message slike this: HDec 29 00:09:18 localhost pppoa3[2752]: Cell had wrong VPI(1391)/VCI(45104) (OAM?) PTI=0x00 Dec 29 00:09:18 localhost pppoa3[2752]: Cell had wrong VPI(3854)/VCI(20976) (OAM?) PTI=0x04 Dec 29 00:09:18 localhost pppoa3[2752]: Cell had wrong VPI(1654)/VCI(9840) (OAM?) PTI=0x00 Dec 29 00:09:18 localhost pppoa3[2752]: Cell had wrong VPI(2805)/VCI(28592) (OAM?) PTI=0x01 Dec 29 00:09:18 localhost pppoa3[2752]: Cell had wrong VPI(1034)/VCI(36719) (OAM?) PTI=0x07 Dec 29 00:09:18 localhost pppoa3[2752]: Cell had wrong VPI(4054)/VCI(30246) (OAM?) PTI=0x03 Dec 29 00:09:18 localhost pppoa3[2752]: Cell had wrong VPI(10)/VCI(62831) (OAM?) PTI=0x05 Dec 29 00:09:18 localhost pppoa3[2752]: Cell had wrong VPI(372)/VCI(2703) (OAM?) PTI=0x03 Dec 29 00:09:18 localhost pppoa3[2752]: Cell had wrong VPI(18)/VCI(8192) (OAM?) PTI=0x00 Dec 29 00:09:18 localhost pppoa3[2752]: CRC error in an AAL5 frame Hope that anyone knows what is going on. Ed > > Hi there, > > First off thanks for info in here, I have now got linux adsl with my 330 > working. The problem is it's not too hot :/ > > I'm running mdk 9.0 with cvs latest (of 22/12/02) of pppoa etc. My box is > an > Asus P2B-S, so that's with the BX chipset. > > My first fix was I changed the config line in speedtouch.sh back to uchi, > I > had made it usb-uhci. This had the effect of taking the speed from ~1k/s > to > ~15k/s. It's still not quite 60k/s though... > > Here's my /proc/bus/usb/devices if it's any help? > > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI Root Hub > S: SerialNumber=d400 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=06b9 ProdID=4061 Rev= 2.00 > S: Manufacturer=ALCATEL > S: Product=Speed Touch 330 > S: SerialNumber=0090D056EE3D > C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=50ms > I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbdevfs > I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbdevfs > E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbdevfs > E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=87(I) Atr=01(Isoc) MxPS= 640 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=usbdevfs > E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=87(I) Atr=01(Isoc) MxPS= 960 Ivl=1ms > I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms > E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl=0ms > > I am getting a shed load of those "CRC error in an AAL5 frame" messages. > > Any help would be appreciated, it's taken me 3 months to get this far! > > Cheers, > > Guy > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se d�sinscrire : > mailto:[EMAIL PROTECTED]?subject=unsubscribe > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
