Hello all,
I just installed openbsd today to try it out. I remember why I didn't keep
it before, as I could never get the 1.1 speedtouch drivers to build (even
with bsd patch).
Well I grabbd the CVS (19_11) drivers and they built a-ok :)
Now, I set everything up (ppp) as previously in netbsd, ie. modify
ppp.conf but when I type
ppp -background adsl
(after loading modem_run which runs fine)
I get:
Working in background mode
Using interface: tun0
Warning: Add route failed: 0.0.0.0/0: errno: No such process
Child failed (errdead)
Here is my messages file (snipped):
OpenBSD 3.2 (GENERIC) #25: Thu Oct 3 19:51:53 MDT 2002
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
...
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x1a: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x1a: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
"VIA VT82C686 SMBus" rev 0x40 at pci0 dev 7 function 4 not configured
ugen0 at uhub1 port 2
ugen0: ALCATEL Speed Touch USB, rev 1.10/0.00, addr 2
...
modem_run[20246]: modem_run version CVS_19_11_2002 started by root uid 0
modem_run[20246]: ADSL synchronization has been obtained
modem_run[20246]: ADSL line is up (608 kbit/s down | 160 kbit/s up)
ppp[22097]: tun0: Warning: Add route failed: 0.0.0.0/0: errno: No such process
ppp[20645]: tun0: Warning: Add route failed: 0.0.0.0/0: errno: No such process
And my ppp.conf file is just the ppp.conf.sample file with the correct
values of 8.35 and my login details.
Any ideas? I read the FAQ and couldn't see anything there...
Thanks,
[EMAIL PROTECTED]
SDF Public Access UNIX System - http://sdf.lonestar.org
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
