Hi all
I have a slight problem with getting my Speedtouch ADSL modem to work.
I have followed the instructions at
http://www.prout.be/ECI/speedtouch.html.
[root@pestilence root]# lsmod
Module Size Used by Not tainted
n_hdlc 7360 0
ethertap 3552 1
tun 4864 2
usb-ohci 19424 0 (unused)
[root@pestilence root]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:20:AF:52:FA:5A
inet addr:192.168.1.100 Bcast:192.168.1.255
Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
RX packets:313 errors:0 dropped:0 overruns:0 frame:0
TX packets:402 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:32432 (31.6 Kb) TX bytes:36918 (36.0 Kb)
Interrupt:5 Base address:0x300
eth1 Link encap:Ethernet HWaddr 52:54:00:ED:B9:0D
inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:4 dropped:0 overruns:0 carrier:8
collisions:68 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:240 (240.0 b)
Interrupt:10 Base address:0xfce0
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:416 (416.0 b) TX bytes:416 (416.0 b)
tap0 Link encap:Ethernet HWaddr FE:FD:00:00:00:00
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX
packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:102 (102.0 b)
Interrupt:5
[root@pestilence root]# cat /proc/interrupts
CPU0
0: 104000 XT-PIC timer
1: 2 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 379 XT-PIC eth0
10: 4 XT-PIC eth1
11: 354 XT-PIC usb-ohci
14: 6213 XT-PIC ide0
I am confused as to why the ppp0 doesn't come up and why tap0 is using
the same IRQ as eth0 because it should be using the IRQ of my USB
controller.
/var/log/messages shows
Jan 17 14:34:10 pestilence modem_run[832]: ADSL synchronization has been
obtained
Jan 17 14:34:10 pestilence modem_run[832]: ADSL line is up (1536 kbit/s
down | 256 kbit/s up)
Jan 17 14:34:10 pestilence pppoa2[888]: Starting PPPoA2 ( merged version
includes new ATM/AAL5 stack ) 1.1
Jan 17 14:34:10 pestilence pppoa2[888]: I'm the parent process, I handle
the endpoint 0x07
Jan 17 14:34:10 pestilence pppoa2[888]: pty descriptors : fdin=3, fdout=3
Jan 17 14:34:10 pestilence pppoa2[891]: I'm the children process, I handle
the endpoint 0x87
Jan 17 14:34:10 pestilence pppoa2[891]: CRC error in an AAL5 frame
Jan 17 14:34:10 pestilence last message repeated 2 times
Jan 17 14:34:10 pestilence /etc/hotplug/net.agent: invoke ifup tap1
Jan 17 14:34:17 pestilence pppd[948]: pppd 2.4.1 started by root, uid 0
Jan 17 14:34:17 pestilence pppd[948]: Using interface ppp0
Jan 17 14:34:17 pestilence pppd[948]: Connect: ppp0 <--> /dev/pts/1
Jan 17 14:34:17 pestilence pppoe[949]: Changed pty line discipline to
N_HDLC for synchronous mode
Jan 17 14:34:17 pestilence /etc/hotplug/net.agent: assuming ppp0 is
already up
Jan 17 14:34:48 pestilence pppd[948]: LCP: timeout sending Config-Requests
Jan 17 14:34:48 pestilence pppd[948]: Connection terminated.
Jan 17 14:34:49 pestilence /etc/hotplug/net.agent: NET unregister event
not supported
Jan 17 14:34:52 pestilence pppoe[949]: Timeout waiting for PADO packets
Jan 17 14:34:52 pestilence pppd[948]: Exit.
Jan 17 14:34:52 pestilence adsl-connect: ADSL connection lost; attempting
re-connection.
Any ideas on this?
TIA
CC
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
