Francois Rogler wrote: >On Fri, Jan 17, 2003 at 01:12:01PM +0000, LeBaBouk wrote: > > >>Hi Francois >> >>Here is my ppp.log. I use ddial mode. Sorry for a so long mail. >> >>What the "Phase: deflink: ** Too many ECHO LQR packets lost ** " means >>please ? >> >>Jan 17 08:42:27 neptune ppp[149]: tun0: IPCP: deflink: LayerUp. >>Jan 17 08:42:27 neptune ppp[149]: tun0: IPCP: myaddr 217.128.248.249 >>hisaddr = 255.255.255.0 >> >>all is good so far ... and then here the disconection : >> >>Jan 17 13:04:51 neptune ppp[149]: tun0: Phase: deflink: ** Too many ECHO >>LQR packets lost ** >> >> >[...] > >So that's what I thought. Few people get this problem. You just have >to disable LQR in the ppp.conf, then it should work fine. > >I activated LQR just to check for ghost connection. So without it you >can have in some rare case ghost connection (when the provider >disconnect you but ppp doesnt know it) but certainly, you will never >face that problem. >And in case of high upload, it seems that LQR packets are dropped >somewhere on some configurations ... and as ppp doesnt get back the >answers, it thinks that the connection is dead. > >If you still have problems with the LQR disabled, give me the new error >from ppp, but I think it should work fine now. > >Regards. > > >
Here is my ppp.conf where i disabled lqr : ------------------------ default: ident user-ppp VERSION (built COMPILATIONDATE) set log Phase Chat IPCP CCP tun command adsl: set authname fti/ve438ht@fti set authkey ####### set device !"pppoa2 -vpi 8 -vci 35 -v 0" accept chap set speed sync set timeout 0 # enable lqr # set lqrperiod 5 set redial 15 10000 set dial "" set ifaddr 10.0.0.1/0 255.255.255.0 0.0.0.0 add default HISADDR enable dns ---------------------- The same problem occurs... ------------------------- Jan 17 14:19:50 neptune ppp[149]: tun0: IPCP: deflink: State change Ack-Sent --> Opened Jan 17 14:19:50 neptune ppp[149]: tun0: IPCP: deflink: LayerUp. Jan 17 14:19:50 neptune ppp[149]: tun0: IPCP: myaddr 217.128.73.127 hisaddr = 255.255.255.0 Jan 17 14:49:59 neptune ppp[148]: Phase: Using interface: tun0 Jan 17 14:49:59 neptune ppp[148]: Phase: deflink: Created in closed state Jan 17 14:49:59 neptune ppp[148]: tun0: Command: adsl: set authname fti/ve438ht@fti Jan 17 14:49:59 neptune ppp[148]: tun0: Command: adsl: set authkey ******** Jan 17 14:49:59 neptune ppp[148]: tun0: Command: adsl: set device !pppoa2 -vpi 8 -vci 35 -v 0 Jan 17 14:49:59 neptune ppp[148]: tun0: Command: adsl: accept chap Jan 17 14:49:59 neptune ppp[148]: tun0: Command: adsl: set speed sync Jan 17 14:49:59 neptune ppp[148]: tun0: Command: adsl: set timeout 0 Jan 17 14:49:59 neptune ppp[148]: tun0: Command: adsl: set redial 15 10000 Jan 17 14:49:59 neptune ppp[148]: tun0: Command: adsl: set dial Jan 17 14:49:59 neptune ppp[148]: tun0: Command: adsl: set ifaddr 10.0.0.1/0 255.255.255.0 0.0.0.0 Jan 17 14:49:59 neptune ppp[148]: tun0: Command: adsl: add default HISADDR Jan 17 14:49:59 neptune ppp[148]: tun0: Command: adsl: enable dns Jan 17 14:49:59 neptune /kernel: ppp [ON] Jan 17 14:49:59 neptune ppp[149]: tun0: Phase: PPP Started (ddial mode). Jan 17 14:49:59 neptune ppp[149]: tun0: Phase: bundle: Establish Jan 17 14:49:59 neptune ppp[149]: tun0: Phase: deflink: closed -> opening Jan 17 14:49:59 neptune ppp[149]: tun0: Phase: deflink: Connected! Jan 17 14:49:59 neptune ppp[149]: tun0: Phase: deflink: opening -> dial Jan 17 14:49:59 neptune ppp[149]: tun0: Phase: deflink: dial -> carrier Jan 17 14:49:59 neptune ppp[149]: tun0: Phase: deflink: carrier -> login Jan 17 14:49:59 neptune ppp[149]: tun0: Phase: deflink: login -> lcp Jan 17 14:50:06 neptune ppp[149]: tun0: Phase: bundle: Authenticate Jan 17 14:50:06 neptune ppp[149]: tun0: Phase: deflink: his = CHAP 0x05, mine = none Jan 17 14:50:06 neptune ppp[149]: tun0: Phase: Chap Input: CHALLENGE (16 bytes from BSREN303) Jan 17 14:50:06 neptune ppp[149]: tun0: Phase: Chap Output: RESPONSE (fti/ve438ht@fti) Jan 17 14:50:07 neptune ppp[149]: tun0: Phase: Chap Input: SUCCESS Jan 17 14:50:07 neptune ppp[149]: tun0: CCP: FSM: Using "deflink" as a transport Jan 17 14:50:07 neptune ppp[149]: tun0: CCP: deflink: State change Initial --> Closed Jan 17 14:50:07 neptune ppp[149]: tun0: CCP: deflink: LayerStart. Jan 17 14:50:07 neptune ppp[149]: tun0: CCP: MPPE: Not usable without CHAP81 Jan 17 14:50:07 neptune ppp[149]: tun0: CCP: deflink: SendConfigReq(1) state = Closed Jan 17 14:50:07 neptune ppp[149]: tun0: CCP: DEFLATE[4] win 15 Jan 17 14:50:07 neptune ppp[149]: tun0: CCP: PRED1[2] Jan 17 14:50:07 neptune ppp[149]: tun0: CCP: deflink: State change Closed --> Req-Sent Jan 17 14:50:07 neptune ppp[149]: tun0: Phase: deflink: lcp -> open Jan 17 14:50:07 neptune ppp[149]: tun0: Phase: bundle: Network Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: FSM: Using "deflink" as a transport Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: deflink: State change Initial --> Closed Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: deflink: LayerStart. Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: deflink: SendConfigReq(1) state = Closed Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: IPADDR[6] 10.0.0.1 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: PRIDNS[6] 193.252.19.4 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: SECDNS[6] 255.255.255.255 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: deflink: State change Closed --> Req-Sent Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: deflink: RecvConfigReq(76) state = Req-Sent Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: IPADDR[6] 193.253.160.3 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: deflink: SendConfigNak(76) state = Req-Sent Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: IPADDR[6] 255.255.255.0 Jan 17 14:50:07 neptune ppp[149]: tun0: CCP: deflink: State change Req-Sent --> Stopped Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: deflink: RecvConfigRej(1) state = Req-Sent Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: deflink: SendConfigReq(2) state = Req-Sent Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: IPADDR[6] 10.0.0.1 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: PRIDNS[6] 193.252.19.4 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: SECDNS[6] 255.255.255.255 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: deflink: RecvConfigReq(77) state = Req-Sent Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: [EMPTY] Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: deflink: SendConfigAck(77) state = Req-Sent Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: [EMPTY] Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: deflink: State change Req-Sent --> Ack-Sent Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: deflink: RecvConfigNak(2) state = Ack-Sent Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: IPADDR[6] 80.11.201.11 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: IPADDR[6] changing address: 10.0.0.1 --> 80.11.201.11 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: PRIDNS[6] 193.252.19.3 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: SECDNS[6] 193.252.19.4 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: Primary nameserver set to 193.252.19.3 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: Secondary nameserver set to 193.252.19.4 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: deflink: SendConfigReq(3) state = Ack-Sent Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: IPADDR[6] 80.11.201.11 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: PRIDNS[6] 193.252.19.3 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: SECDNS[6] 193.252.19.4 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: deflink: RecvConfigAck(3) state = Ack-Sent Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: IPADDR[6] 80.11.201.11 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: PRIDNS[6] 193.252.19.3 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: SECDNS[6] 193.252.19.4 Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: deflink: State change Ack-Sent --> Opened Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: deflink: LayerUp. Jan 17 14:50:07 neptune ppp[149]: tun0: IPCP: myaddr 80.11.201.11 hisaddr = 255.255.255.0 Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
