Il s'agit sans doute d'un probl�me dans tes fichiers de config.
Voici ceux que j'utilise sur une Mandrake 9.0
a) Contenu de /etc/ppp/adsl
========================
# Remplacez ci-dessous le champ IIIIIII par votre identifiant d'acc�s fourni par
Wanadoo
# Conservez l'option -e 1 dans la ligne pty ci-dessous sinon cela ne marche plus !!!
# Les deux premi�res lignes peuvent �tre d�comment�es pour avoir plus d'infos dans les
logs.
# Si vous mettez alors kdebug 7 vous aurez tous les �changes avec le modem !!
#debug
#kdebug 1
pty "/usr/local/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 -e 1"
sync
user "fti/IIIIIII@fti"
noaccomp
nopcomp
noccp
novj
holdoff 4
persist
maxfail 25
defaultroute
b) Contenu de /etc/ppp/chap-secrets
================================
# Secrets for authentication using CHAP
# client server secret IP addresses
fti/IIIIIII@fti * PPPPPPPP *
NB : Bien s�r remplacez IIIIIII et PPPPPPPP par les valeurs que votre ISP Wanadoo vous
a fournies :-)
(Identifiant et mot de passe d'acc�s)
c) Contenu de /etc/ppp/pap-secrets
===============================
# Secrets for authentication using PAP (Est vide car Wanadoo utilise CHAP pour l'ADSL)
# client server secret IP addresses
d) Contenu de /etc/ppp/options
===========================
noauth
usepeerdns
lock
noipdefault
e) Contenu de /etc/modules.conf
============================
RAJOUTEZ les lignes suivantes � votre fichier modules.conf :
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-13 n_hdlc
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
>Messsage du 11/01/2003 12:36
>De : <[EMAIL PROTECTED]>
>A : <[EMAIL PROTECTED]>
>Copie � :
>Objet : [speedtouch] Pb a l'installation de SpeedTouch 330: ppp0 existe mais pas
>d'adresse IP
>
> Bonjour,
>
> J'essaye d'installer sur une Slackware 8.1 la speedtouch 330 avec le FAI
> Wanadoo.
> ppp0 existe mais aucune adresse IP n'est attribuee. D'apres la FAQ, j'ai
> verifie mon
> login et mon mot de passe, mais en scrutant les log j'ai lors de
> l'execution de pppoa3:
> "fti/login@fti" * "pass" dans chap-secrets et user "fti/login@fti" dans adsl
>
> pppoa3[231]: Error reading from pppd
> pppoa3[228]: Woken by a sem_post event -> Exiting
>
> Merci de m'indiquer toute informations a ce sujet, ci-apres mes logs et
> le /proc/bus/ubs/devices
>
> Jan 10 23:03:14 darkstar kernel: N_HDLC line discipline registered.
> Jan 10 23:04:55 darkstar modem_run[192]: modem_run version 1.1 started by root uid 0
> Jan 10 23:04:55 darkstar modem_run[192]: Found ALCATEL SpeedTouch USB modem
> Jan 10 23:04:55 darkstar modem_run[192]: Best offset 2772 with probability 100%
> Jan 10 23:04:55 darkstar modem_run[192]: Best offset 528730 with probability 100%
> Jan 10 23:04:57 darkstar modem_run[192]: BLOCK1 : 991 bytes uploaded : OK
> Jan 10 23:04:58 darkstar modem_run[192]: BLOCK2 : 511 bytes downloaded : OK
> Jan 10 23:04:59 darkstar modem_run[192]: BLOCK3 : 528738 bytes uploaded : OK
> Jan 10 23:04:59 darkstar modem_run[192]: Downloaded in 1679.341000 ms
> Jan 10 23:04:59 darkstar modem_run[192]: BLOCK4 : 511 bytes downloaded : OK
> Jan 10 23:05:00 darkstar modem_run[192]: Modem reference : 3EC36656AAAA01
> Jan 10 23:05:12 darkstar modem_run[194]: Received interrupt, len = 6
> Jan 10 23:05:12 darkstar modem_run[192]: ADSL synchronization has been obtained
> Jan 10 23:05:12 darkstar modem_run[192]: Modem State
> Jan 10 23:05:12 darkstar modem_run[192]: ADSL line is up (160 kbit/s down | 96
>kbit/s up)
> Jan 10 23:03:14 darkstar kernel: HDLC line discipline: version $Revision: 3.3 $,
>maxframe=4096
> Jan 10 23:04:57 darkstar kernel: usb_control/bulk_msg: timeout
> Jan 10 23:04:57 darkstar kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len
>512 ret -110
> Jan 10 23:09:44 darkstar pppoa3[231]: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00 ................
> Jan 10 23:09:44 darkstar pppoa3[231]: 12 85 d4 8a c6
> .....
> Jan 10 23:09:47 darkstar pppd[210]: sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic
>0xa7abb1aa>]
> Jan 10 23:09:47 darkstar pppoa3[231]: PPP packet read from ppp(d) (18 bytes long)
> Jan 10 23:09:47 darkstar pppoa3[231]: c0 21 01 03 00 10 02 06 00 00 00 00 05 06 a7
>ab .!..............
> Jan 10 23:09:47 darkstar pppoa3[231]: b1 aa
> ..
> Jan 10 23:09:47 darkstar pppoa3[231]: ATM cell queue built (53 bytes long)
> Jan 10 23:09:47 darkstar pppoa3[231]: 00 80 02 32 ec c0 21 01 03 00 10 02 06 00 00
>00 ...2..!.........
> Jan 10 23:09:47 darkstar pppoa3[231]: 00 05 06 a7 ab b1 aa 00 00 00 00 00 00 00 00
>00 ................
> Jan 10 23:09:47 darkstar pppoa3[231]: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00 ................
> Jan 10 23:09:47 darkstar pppoa3[231]: 12 85 d4 8a c6
> .....
> Jan 10 23:09:50 darkstar pppd[210]: sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic
>0xa7abb1aa>]
> Jan 10 23:09:50 darkstar pppoa3[231]: PPP packet read from ppp(d) (18 bytes long)
> Jan 10 23:09:50 darkstar pppoa3[231]: c0 21 01 03 00 10 02 06 00 00 00 00 05 06 a7
>ab .!..............
> Jan 10 23:09:50 darkstar pppoa3[231]: b1 aa
> ..
> Jan 10 23:09:50 darkstar pppoa3[231]: ATM cell queue built (53 bytes long)
> Jan 10 23:09:50 darkstar pppoa3[231]: 00 80 02 32 ec c0 21 01 03 00 10 02 06 00 00
>00 ...2..!.........
> Jan 10 23:09:50 darkstar pppoa3[231]: 00 05 06 a7 ab b1 aa 00 00 00 00 00 00 00 00
>00 ................
> Jan 10 23:09:50 darkstar pppoa3[231]: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00 ................
> Jan 10 23:09:50 darkstar pppoa3[231]: 12 85 d4 8a c6
> .....
> Jan 10 23:09:53 darkstar pppd[210]: sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic
>0xa7abb1aa>]
> Jan 10 23:09:53 darkstar pppoa3[231]: PPP packet read from ppp(d) (18 bytes long)
> Jan 10 23:09:53 darkstar pppoa3[231]: c0 21 01 03 00 10 02 06 00 00 00 00 05 06 a7
>ab .!..............
> Jan 10 23:09:53 darkstar pppoa3[231]: b1 aa
> ..
> Jan 10 23:09:53 darkstar pppoa3[231]: ATM cell queue built (53 bytes long)
> Jan 10 23:09:53 darkstar pppoa3[231]: 00 80 02 32 ec c0 21 01 03 00 10 02 06 00 00
>00 ...2..!.........
> Jan 10 23:09:53 darkstar pppoa3[231]: 00 05 06 a7 ab b1 aa 00 00 00 00 00 00 00 00
>00 ................
> Jan 10 23:09:53 darkstar pppoa3[231]: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00 ................
> Jan 10 23:09:53 darkstar pppoa3[231]: 12 85 d4 8a c6
> .....
> Jan 10 23:09:56 darkstar pppd[210]: sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic
>0xa7abb1aa>]
> Jan 10 23:09:56 darkstar pppoa3[231]: PPP packet read from ppp(d) (18 bytes long)
> Jan 10 23:09:56 darkstar pppoa3[231]: c0 21 01 03 00 10 02 06 00 00 00 00 05 06 a7
>ab .!..............
> Jan 10 23:09:56 darkstar pppoa3[231]: b1 aa
> ..
> Jan 10 23:09:56 darkstar pppoa3[231]: ATM cell queue built (53 bytes long)
> Jan 10 23:09:56 darkstar pppoa3[231]: 00 80 02 32 ec c0 21 01 03 00 10 02 06 00 00
>00 ...2..!.........
> Jan 10 23:09:56 darkstar pppoa3[231]: 00 05 06 a7 ab b1 aa 00 00 00 00 00 00 00 00
>00 ................
> Jan 10 23:09:56 darkstar pppoa3[231]: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00 ................
> Jan 10 23:09:56 darkstar pppoa3[231]: 12 85 d4 8a c6
> .....
> Jan 10 23:09:59 darkstar pppd[210]: using channel 4
> Jan 10 23:10:00 darkstar pppd[210]: sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic
>0xd1d1b993>]
> Jan 10 23:09:28 darkstar pppoa3[228]: Control thread ready
> Jan 10 23:09:28 darkstar pppoa3[228]: Pty descriptors : fdin=0, fdout=1
> Jan 10 23:09:28 darkstar pppoa3[228]: N_HDLC line set up
> Jan 10 23:09:28 darkstar pppoa3[228]: Modem found!
> Jan 10 23:09:28 darkstar pppoa3[231]: ppp(d) --> pppoa3 --> modem stream ready
> Jan 10 23:09:28 darkstar pppoa3[232]: modem --> pppoa3 --> ppp(d) stream ready
> Jan 10 23:09:32 darkstar pppoa3[231]: ATM cell queue sent to USB
> Jan 10 23:09:56 darkstar last message repeated 4 times
> Jan 10 23:09:59 darkstar pppd[210]: Connection terminated.
> Jan 10 23:09:59 darkstar pppoa3[231]: Error reading from pppd
> Jan 10 23:09:59 darkstar pppoa3[228]: Woken by a sem_post event -> Exiting
> Jan 10 23:09:59 darkstar pppoa3[228]: Read from ppp Canceled
> Jan 10 23:09:59 darkstar pppoa3[231]: Cleaning Read from ppp data
> Jan 10 23:09:59 darkstar pppoa3[228]: Write to ppp Canceled
> Jan 10 23:09:59 darkstar pppoa3[232]: Cleaning Write to ppp data
> Jan 10 23:09:59 darkstar pppoa3[237]: PPPoA3 version 1.1 started by root (uid 0)
> Jan 10 23:09:59 darkstar pppoa3[237]: Vpi set to 8
> Jan 10 23:09:59 darkstar pppoa3[237]: Vci set to 35
> Jan 10 23:09:59 darkstar pppoa3[237]: Verbosity level set to 2
> Jan 10 23:09:59 darkstar pppoa3[237]: Schedule policy set to 0
> Jan 10 23:09:59 darkstar pppd[210]: Using interface ppp0
> Jan 10 23:09:59 darkstar pppoa3[237]: Modem ID set to 1
> Jan 10 23:09:59 darkstar pppd[210]: Connect: ppp0 <--> /dev/pts/3
> Jan 10 23:09:59 darkstar pppoa3[237]: Using Sync HDLC mode
> Jan 10 23:09:59 darkstar pppoa3[237]: Previous instance cleaning enabled
> Jan 10 23:09:59 darkstar pppoa3[237]: A previous instance seems to be running
> Jan 10 23:09:59 darkstar pppoa3[237]: Sending the kill signal to 228 and waiting...
> Jan 10 23:10:30 darkstar pppd[210]: Connection terminated.
> Jan 10 23:10:30 darkstar pppd[210]: Using interface ppp0
> Jan 10 23:10:30 darkstar pppd[210]: Connect: ppp0 <--> /dev/pts/4
> Jan 10 23:10:30 darkstar pppoa3[244]: PPPoA3 version 1.1 started by root (uid 0)
> Jan 10 23:10:30 darkstar pppoa3[244]: Vpi set to 8
> Jan 10 23:10:30 darkstar pppoa3[244]: Vci set to 35
>
>
>
>
>
> Liste de diffusion modem ALCATEL SpeedTouch USB
> Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
>
>
>
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
