Hello,
I have a Debian woody 3.0 router with a speedtouch USB modem attached to
it. I want to autoconnect on boot. So I configured the script provided
with the drivers. I'm pretty sure the USBCORE and NHDLC are modules,
but not sure about the USBINTERFACE, I set it on both 0 and 1, both
didn't work. My USBCONTROLER is UHCI. The rest is well configured.
At boot my PC pauzes, so I have to press enter to continue. The
speedtouch drivers don't load ( I don't see the modem loading it and the
connection isn't started (duh)) When i check the kern.log it sais :
"Jun 1 14:35:34 gaia kernel: PPP generic driver version 2.4.1
Jun 1 14:35:34 gaia kernel: HDLC line discipline: version $Revision:
3.3 $, maxframe=4096
Jun 1 14:35:34 gaia kernel: N_HDLC line discipline registered.
Jun 1 14:35:34 gaia kernel: usb-uhci.c: $Revision: 1.275 $ time
01:18:26 Sep 20 2002
Jun 1 14:35:34 gaia kernel: usb-uhci.c: High bandwidth mode enabled
Jun 1 14:35:34 gaia kernel: PCI: Found IRQ 11 for device 00:14.2
Jun 1 14:35:34 gaia kernel: PCI: Sharing IRQ 11 with 00:0d.0
Jun 1 14:35:34 gaia kernel: usb-uhci.c: USB UHCI at I/O 0x1000, IRQ 11
Jun 1 14:35:34 gaia kernel: usb-uhci.c: Detected 2 ports
Jun 1 14:35:34 gaia kernel: usb.c: new USB bus registered, assigned bus
number 1
Jun 1 14:35:34 gaia kernel: hub.c: USB hub found
Jun 1 14:35:34 gaia kernel: hub.c: 2 ports detected
Jun 1 14:35:34 gaia kernel: usb-uhci.c: v1.275:USB Universal Host
Controller Interface driver
Jun 1 14:35:34 gaia kernel: hub.c: USB new device connect on bus1/2,
assigned device number 2
Jun 1 14:35:34 gaia kernel: usb.c: USB device 2 (vend/prod
0x6b9/0x4061) is not claimed by any active driver.
"
Can anybody help me, cause i'm the only one @ home that is able to start
the router. I want it to autostart's its connection.
Thx
Michiel
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
