Check out all occurrences of 'LCP' in the mail-archive and come back, when you don't find a solution..............
Ok Venkatesulu Prema-MGI0516 wrote: >Hi, > >I am running MontaVista Linux and I am trying to connect an Alcatel USB >Modem (SpeedTouch 330). I have followed the "SpeedTouchUSB-HOWTO using >Benoit Papillault's OpenSource Drivers". I am getting pretty close but I >cannot get a successful connection. When I look in /var/log/messages I >see the following. > >Jan 1 00:00:31 172 modem_run[159]: ADSL synchronization has been obtained >Jan 1 00:00:31 172 modem_run[159]: ADSL line is up (768 kbit/s down | 256 >kbit/s up) >Jan 1 00:00:32 172 pppd[182]: pppd 2.4.1 started by root, uid 0 >Jan 1 00:00:32 172 pppd[182]: Using interface ppp0 >Jan 1 00:00:32 172 pppd[182]: Connect: ppp0 <--> /dev/pts/0 >Jan 1 00:01:03 172 pppd[182]: LCP: timeout sending Config-Requests >Jan 1 00:01:03 172 pppd[182]: Connection terminated. > > >When I type ifconfig -a, I see the following: > >ppp0 Link encap:Point-to-Point Protocol >POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1 >RX packets:22 errors:0 dropped:0 overruns:0 frame:0 >TX packets: 0 errors:0 dropped:0 overruns:0 carrier:0 >collisions: 0 txquelen:3 >Rx bytes: 478 (478.0 b) Tx bytes: 0 (0.0 b) > >I have looked at previous emails and they say that this can happen when vpi >and vci are set incorrectly. I have verified that my settings are correct >vpi is 0 and vci is 35, but I still cannot get a connection. > >Does anyone have any suggestions as to how I can get a connection and access >the internet? > >Thanks. >Prema > > > > > > > > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se d�sinscrire : mailto:[EMAIL PROTECTED] > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
