----- Original Message ----- From: "Dimitrov Peter" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, July 16, 2003 6:58 PM Subject: [speedtouch] problem: RFC1483 Bridged ETHernet over ATM (ETHoA)
> > Hi! > > Last time I've installed the modem to work via pppoe, but it turned out that > my ISP uses RFC1483 Bridged ETHernet over ATM (ETHoA). Can anybody help what > to do to get the stuff work? > I've tried both the HOWTO by Johan Verrept and the user space driver. > Kernel supports RFC1483 and RFC2684. At this point I absolutely don't know > what to do. I've found infos only about PPPoA, PPPoE installation. > I don't know if the user space driver (pppoa3 with bridge option ) is able to support EthoA because I have never seen somebody claiming that. I think it's may run if you need LLC encapsulation because it's the setting used with PPPoE but not with VCmux encapsulation. For encapsulation choice, you need the kernel driver and create only a bridge with br2684ctl on nas0. Look at http://home.sch.bme.hu/~cell/br2684/ You have to compile http://home.sch.bme.hu/~cell/br2684/dist/010402/brctl-010226.c and use like that http://home.sch.bme.hu/~cell/br2684/USAGE.br2684 You can forget all other patches if you kernel is not too old (2.4.20 and 2.4.21) Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
