On Saturday 08 November 2003 17:53, twix21 wrote:
> Thanks, I got the latest rh kernel 2.4.20-20.9, started from scratch and it
> built ok. When I plug the modem into the usb port, the connection starts
> up ok - the first time after a reboot. It leaves a modem_run process lying
> around which I kill, it looks like it's invoked it twice following the
> hotplug.
Three times actually. This is harmless, and comes from hotplug being
invoked for each interface on a USB device, rather than once for the
device, with recent kernels. (The speedtouch modems have three
interfaces). The modem_run process that is hanging around is
monitoring the line state.
> Please could you tell me how to shut the connection down and restart it
> once the system is up and running? I've tried using speedtch.sh but
> modem_run refuses to work (returns 255). It's a pain to have to reboot the
> machine and plug the modem in every time the connection goes down.
You don't need to launch modem_run again, just run pppd again:
pppd
If that is not enough, unplug the modem and plug it back in again. You can get
the same effect by restarting the hotplug subsystem:
/etc/init.d/hotplug restart
All the best,
Duncan.
>
> On Fri, 7 Nov 2003 09:13:48 +0100
>
> Duncan Sands <[EMAIL PROTECTED]> wrote:
> > On Friday 07 November 2003 09:12, Duncan Sands wrote:
> > > On Wednesday 05 November 2003 15:19, twix21 wrote:
> > > > Got a brand new redhat 9.0 installation. Copied speedbundle on and
> > > > tried to build it. After copying the right values in type make, it
> > > > chunters along and then produces the following:
> > >
> > > This is a known problem with redhat. Try the attached top level
> > > Makefile instead.
> >
> > And here it is inline:
> >
> > all: build
> >
> > configure: configure-stamp
> > configure-stamp:
> > ./configure
> >
> > build: configure-stamp build-stamp
> > build-stamp:
> > cd kernel_module && $(MAKE)
> > cd linux-atm/src/lib && $(MAKE)
> > cd ppp/pppd && $(MAKE)
> > cd ppp/pppd/plugins && $(MAKE)
> > C_INCLUDE_PATH=../../../linux-atm/src/include
> > LIBRARY_PATH=../../../linux-atm/src/lib/.libs cd firmware && $(MAKE)
> > cd firmware_loader && $(MAKE)
> > cd hotplug_scripts && $(MAKE)
> > cd ppp_scripts && $(MAKE)
> > touch build-stamp
> >
> > clean:
> > rm -f build-stamp configure-stamp
> > cd firmware && $(MAKE) clean
> > cd firmware_loader && $(MAKE) clean
> > cd hotplug_scripts && $(MAKE) clean
> > cd kernel_module && $(MAKE) clean
> > cd linux-atm/src/lib && $(MAKE) clean
> > cd ppp/pppd/plugins && $(MAKE) clean
> > cd ppp/pppd && $(MAKE) clean
> > cd ppp_scripts && $(MAKE) clean
> >
> > install: build
> > cd kernel_module && $(MAKE) install
> > cd firmware && $(MAKE) install
> > cd firmware_loader && $(MAKE) modem_run
> > cd hotplug_scripts && $(MAKE) install
> > cd linux-atm/src/lib && $(MAKE) install
> > cd ppp/pppd && $(MAKE) install
> > cd ppp/pppd/plugins && $(MAKE) install
> > cd ppp_scripts && $(MAKE) install
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
