----- Original Message ----- From: "Kieran Barnes" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, December 25, 2003 2:08 PM Subject: [speedtouch] Multiple copies
> > Merry Christmas guys, > > I am after a bit of advice. I am lucky enough to have two ADSL connections > in my house. > My original one is currently served (fantastically) by the speedtouch > drivers which work perfectly. > I'd like to have the other setup on the same machine with an identical modem. > > What I'd like to know is: Can I run multiple copies of the modem_run > program so I can use two modems/connections at the same time? > RTFM modem_run --help modem_run version 1.2-beta3: $ usage: modem_run [-v level] [-m] -f microcode -v : verbose level [0-2] -m : monitor the line -s : skip the first 512 bytes read -f microcode : upload this microcode file first -d device : defines the device to use <= this is what you need -k : using the kernel mode driver -t seconds : synchronization timeout --help : this message > From what I can see the driver just searches for any unclaimed modems on > the USB port. So running it again shouldn't be a problem? > > My simple, but crude plan at the moment is just to add a virtual IP to my > internal interface and statically route traffic via either modem. > Is this possible? > > > -- > Kieran Barnes > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se d�sinscrire : mailto:[EMAIL PROTECTED] > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
