Hi I've got the same problem, whatever upload is limited or not (but very low rate seems to be better, it just takes more time before the disconnection occurs) >> No big upload too long time, no disconnections (what a shame for a 1024/**256** line...)
After many many tests, the last thing I have to try is to change my motherboard because of this crappy VIA chipset... or get an Ethernet modem/router ... :p I have two workstations, 1 FreeBSD, 1 Windows, same problem on both... same motherboards... same VIA chipset. Tried all firmwares available. I now use the most recent one. Jeremy At 19:38 04/01/2004 +0100, you wrote: >Hi everybody !! > >I have the "disconnection" problem that a lot of people seems to have. > >Symptoms : >======= > >When generating traffic to the outside, modem hangs within 5 seconds. Ie >with ping : >ping -s 4000 -f <My ptp IP> > >ppp0 is still up, TX increase, but RX stops increasing. I noticed that >the TX increased too much for my only 128k of upload. > >Solutions : >====== >This is for one hour that I read post about this problem and there are >no clear answers. > >- Is it a problem with the driver ? (I tryed 2 different drivers >open-source) >- Is it a problem with the usb driver ? (I tryed with uhci and usb-uchi) >- Is it a problem with some buggy via chipsets ? >- Is this the firmware ? (I'm using the firmware from the windows driver >because it's an isdn model) >- Should we try the close source driver ? >- Is this a solution to make QOS ? Did somebody tried ? >Upload/Download/Both ? > > > > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se désinscrire : mailto:[EMAIL PROTECTED] > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]