Hi, Ive tried the mentioned firmwre and it was worse than ever, CRC Errors arnt much of a problem, one every so often. Just the bulk time out that bothers me. Every 10 mins or so for 2-3 mins. I've noticed though its only starting happening now I've started to use a second modem quite heavily (2 adsl lines & 2 modems).
Regards, Chris ----- Original Message ----- From: "Stephen Illingworth" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, January 16, 2004 12:17 PM Subject: [speedtouch] Re: VPI/VCI problems > On Fri, 16 Jan 2004 10:16:02 -0000 > "Chris Bolton" <[EMAIL PROTECTED]> wrote: > > > > Hi, > > > > Not sure if its a know problem but I'm using the same driver as you and I > > get the same thing. > 8<--- snip --- > > Although the connection doesnt become unusable, only while the > > usb_control/bulk_msg: timeout messages are appearing but they only last for > > a min or so (still very annoying) and then the conenction returns to normal. > > I've since started using different firmware and the situation is rather better. I still > get cells with wrong vpi/vci but I never get CRC errors (in fact I haven't a single > one since upgrading to beta3), never had a USBDEVFS_BULK error and > the connection stays up permanently. > > The firmware I am now using is KQD6P2.eni from the Thompson homepage > > http://download.ethomson.com/download/KQD6_R204.zip > > All other firmware files, despite working fine with beta1, cause the same problems > for me as I described in my original mail. > > > Regards, > > Steve > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se désinscrire : mailto:[EMAIL PROTECTED] > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]