Hi there! Is your vpi/vci combination okay? You're using 0/35; please check.
And, about the usernames etc: in /etc/ppp/peers/adsl it should say: user "[EMAIL PROTECTED]" and in /etc/ppp/pap-secrets & chap-secrets (both if you don't know which one will be used....) "[EMAIL PROTECTED]" * "password" * Good luck Ok Paul/avatar_58 wrote: >Feb 3 20:12:39 avatar modem_run[1298]: ADSL line is up (160 kbit/s down | 96 kbit/s >up) >Feb 3 20:12:43 avatar pppd[1302]: pppd 2.4.1 started by root, uid 0 >Feb 3 20:12:43 avatar pppd[1302]: Using interface ppp0 >Feb 3 20:12:43 avatar pppd[1302]: Connect: ppp0 <--> /dev/pts/4 >Feb 3 20:12:43 avatar pppoa3[1303]: pppoa3 version 1.2-beta3 started by root (uid 0) >Feb 3 20:12:43 avatar pppoa3[1303]: Vpi set to 0 >Feb 3 20:12:43 avatar pppoa3[1303]: Vci set to 35 >Feb 3 20:12:43 avatar pppoa3[1303]: Verbosity level set to 2 >Feb 3 20:12:43 avatar pppoa3[1303]: Schedule policy set to 0 >Feb 3 20:12:43 avatar pppoa3[1303]: Modem ID set to 1 >Feb 3 20:12:43 avatar pppoa3[1303]: Using Sync HDLC mode >Feb 3 20:12:43 avatar pppoa3[1303]: Using PPPoA mode >Feb 3 20:12:43 avatar pppoa3[1303]: Control pipe disabled >Feb 3 20:12:43 avatar pppoa3[1303]: Previous instance cleaning enabled >Feb 3 20:12:43 avatar pppoa3[1303]: Control thread ready >Feb 3 20:12:43 avatar pppoa3[1303]: Modem found! >Feb 3 20:12:43 avatar pppoa3[1312]: host --> pppoa3 --> modem stream ready >Feb 3 20:12:43 avatar pppoa3[1313]: modem --> pppoa3 --> host stream ready >Feb 3 20:13:14 avatar pppd[1302]: Connection terminated. >Feb 3 20:13:14 avatar pppoa3[1312]: Cleaning Read from usb data >Feb 3 20:13:14 avatar pppoa3[1303]: Write to usb Canceled >Feb 3 20:13:14 avatar pppoa3[1313]: Cleaning Write to usb data > >And finally this is what "/var/log/syslog" tells me: > >Feb 3 20:11:49 avatar kernel: HDLC line discipline: version $Revision: 3.3 $, >maxframe=4096 >Feb 3 20:12:21 avatar kernel: usb_control/bulk_msg: timeout >Feb 3 20:12:21 avatar kernel: usbdevfs: USBDEVFS_BULK failed dev 6 ep 0x85 len 512 >ret -110 >Feb 3 20:13:14 avatar pppd[1302]: LCP: timeout sending Config-Requests >Feb 3 20:13:14 avatar pppoa3[1312]: Error reading from source device >Feb 3 20:13:14 avatar pppoa3[1303]: Woken by a sem_post event -> Exiting > > > >Any help whatsoever would be appreciated. So far, from what I gather, the firmware >upload works. All the modules are present. The only thing I see that goes wrong is >once I type "pppd call adsl". It works all according to plan....then finds a previous >instance (????) and fails for no reason. Can someone explain this? I really would >love to get this working, I've spent far too much time trying this and I am running >out of plans. > >Bewildred: avatar_58 > > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se d�sinscrire : mailto:[EMAIL PROTECTED] > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
