The default Fedora Kernel doesn't have support for neither speedtouch modem nor ATM and PPPoATM as far as I know.
I made some RPMs to deal with this problem, but the kernel I made is based on the original Fedora kernel which is a bit older than yours. Here is the address : http://grumz.dyndns.org/ADSL_FC2 But if you want your version of the kernel, you will need to recompile the kernel manually and eventually apply some usb patch if they haven't been applied in the official kernel since I made mine. For the patch problem, Duncan will be the best person to answer I think. Good luck Have a nice day, Fred Jorge -Educanet- wrote: >Hello all, > > Sorry about my English > > First: > > Distribution: Fedora Core 2 + 2.6.7-1.494.2.2 (From Fedora rpm) > USB driver version: speedtouch-1.3 > modem_run version 1.3 > pppd version 2.4.2 > pppoa3 version 1.3 > > --------------------------------------- > > The modem_run program works as expected. >������������������������������������������������������������������������������� >modem_run[2286]: modem_run version 1.3 started by root uid 0 >modem_run[2286]: Found SpeedTouch USB modem >modem_run[2286]: Modem revision: 0400 >modem_run[2286]: Best offset 32 with probability 100% >modem_run[2286]: Best offset 927 with probability 100% >modem_run[2286]: Firmware info (CRC:0x69636579, Size:935, Checked: Yes, >Alcatel/Thomson Boot block (new)) >modem_run[2286]: Best offset 967 with probability 100% >modem_run[2286]: Best offset 775537 with probability 100% >modem_run[2286]: Firmware info (CRC:0x41d4143c, Size:775545, Checked: Yes, 0.0.0 - >testing firmware from Thomson) >modem_run[2286]: BLOCK1 : 935 bytes uploaded : OK >modem_run[2286]: BLOCK2 : 511 bytes downloaded : OK >modem_run[2286]: BLOCK3 : 775545 bytes uploaded : OK >modem_run[2286]: BLOCK4 : 511 bytes downloaded : OK >modem_run[2286]: Modem reference : 35720370...... >modem_run[2286]: ADSL synchronization has been obtained >modem_run[2286]: ADSL line is up (2016 kbit/s down | 320 kbit/s up) >������������������������������������������������������������������������������ > >but the pppd + pppoa3 do not work: > >������������������������������������������������������������������������������ >pppd[2349]: pppd 2.4.2 started by root, uid 0 >pppd[2349]: using channel 3 >kernel: divert: not allocating divert_blk for non-ethernet device ppp0 >pppd[2349]: Using interface ppp0 >pppd[2349]: Connect: ppp0 <--> /dev/pts/2 >pppoa3[2350]: pppoa3 version 1.3 started by root (uid 0) >pppoa3[2350]: Vpi set to 8 >pppoa3[2350]: Vci set to 35 >pppoa3[2350]: Verbosity level set to 2 >pppoa3[2350]: Schedule policy set to 0 >pppoa3[2350]: Modem ID set to 1 >pppoa3[2350]: Using Sync HDLC mode >pppoa3[2350]: Using PPPoA mode >pppoa3[2350]: Control pipe disabled >pppoa3[2350]: Previous instance cleaning enabled >pppoa3[2350]: Control thread ready >pppoa3[2350]: Pty descriptors : fdin=0, fdout=1 >pppoa3[2350]: N_HDLC line set up >pppoa3[2350]: Modem found! >pppoa3[2350]: host --> pppoa3 --> modem stream ready >pppoa3[2350]: modem --> pppoa3 --> host stream ready > >pppd[2349]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x1d1b51e6>] >pppoa3[2350]: PPP packet read from source device (18 bytes long) >pppoa3[2350]: ATM cell queue built (53 bytes long) >kernel: ppp_synctty: send buffer, count = 20 >kernel: FF 03 C0 21 01 01 00 10 ...!.... >kernel: 02 06 00 00 00 00 05 06 ........ >kernel: 1D 1B 51 E6 ..Q. >pppoa3[2350]: ATM cell queue sent to USB >pppoa3[2350]: ATM cells read from USB (53 bytes long) >pppoa3[2350]: Management cell in stream (OAM) > >pppd[2349]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x1d1b51e6>] >pppoa3[2350]: PPP packet read from source device (18 bytes long) >pppoa3[2350]: ATM cell queue built (53 bytes long) >kernel: ppp_synctty: send buffer, count = 20 >kernel: FF 03 C0 21 01 01 00 10 ...!.... >kernel: 02 06 00 00 00 00 05 06 ........ >kernel: 1D 1B 51 E6 ..Q. >pppoa3[2350]: ATM cell queue sent to USB > >[Repeated several times] > >Aug 5 11:15:47 adslserver pppd[2349]: LCP: timeout sending Config-Requests >Aug 5 11:15:47 adslserver pppd[2349]: Connection terminated. >Aug 5 11:15:47 adslserver kernel: divert: no divert_blk to free, ppp0 not ethernet >Aug 5 11:15:47 adslserver pppoa3[2369]: Error reading from source device >Aug 5 11:15:47 adslserver pppoa3[2369]: Cleaning Read from usb data >Aug 5 11:15:47 adslserver pppoa3[2369]: Woken by a sem_post event -> Exiting >Aug 5 11:15:47 adslserver pppoa3[2369]: Write to usb Canceled >Aug 5 11:15:47 adslserver pppoa3[2369]: Cleaning Write to usb data >Aug 5 11:15:47 adslserver pppd[2349]: Waiting for 1 child processes... >Aug 5 11:15:47 adslserver pppd[2349]: script /usr/local/sbin/pppoa3 -v 2 -e 1 -c >-m 1 -vpi 8 -vci 35, pid 2369 >Aug 5 11:15:47 adslserver pppoa3[2369]: Exiting >Aug 5 11:15:47 adslserver pppd[2349]: Script /usr/local/sbin/pppoa3 -v 2 -e 1 -c -m >1 -vpi 8 -vci 35 finished (pid 2369), status = 0xff >Aug 5 11:15:47 adslserver pppd[2349]: Exit. > >������������������������������������������������������������������������������ > >The errors: > > >kernel: divert: not allocating divert_blk for non-ethernet device ppp0 > >pppoa3[2350]: Management cell in stream (OAM) > >Aug 5 11:15:47 adslserver kernel: divert: no divert_blk to free, ppp0 not ethernet > > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
