Dear speedtouch developers, Unfortunately, I have to confirm this issue on Gentoo 2004.2 (athlon-xp arch, dev-kernel 2.6.7-r11).
My green SpeedTouch USB modem is working fine with 2.4.26 kenel or Win98 on the same box, assuming my PPPoA VPI/VCI and the account configs are correct. I am using kernel-space speedtch module and I think all necessary usb/ppp modules are activated in the kernel as well. My modem seems to want UHCI. Having speedtouch-1.2-beta2 Gentoo package successfully installed and configured I obtain only: pppoa3[3080]: hostname pusb_claim_interface 1 failed and immediate modem hangup in syslog. I use '-k' switch when invoking modem_run (and, also, famous '-e 1' switch for pppoa3) and original alcaudsl.sys firmware. The current 1.3 version of SpeedTouch is not yet packaged for Gentoo distro. (I have tried to configure/make/make install it from the speedtouch-1.3.tar.bz2, but it was harder than using 1.2 package for me -- e.g. there is a silent requirement that lspci tool is present in system, debug info is minimal by default, so I soon gave up. Even my attempt to use pppoa3 1.3 binary instead of 1.2 binary with the same 1.2 config failed.) Could you please help me? Has anybody an experience with a speedtouch 1.2 on 2.6.7 kernel? Which modules to use in user space and/or in kernel space for such versions? Configuration advice? Thank you in advance, Pavel Suchmann > From: K.J. Petrie (Instabook) > Subject: [speedtouch] pusb_claim_interface 1 failed with 330 modem > Date: Wed, 02 Jun 2004 08:17:07 -0700 > > Dear all, > > I'm having trouble connecting to Wanadoo Broadband in the UK using a silver > SpeedTouch 330 under Linux Mandrake 10.0. It works well under Windows, so I > know the VPI and VCI settings are correct, although I'm not sure about > the -e value for pppoa3. > ... ____________________________________________________________ Příjemný design. Příjemnější cena. NOKIA 2300 již od 577 Kč http://ad.seznam.cz/clickthru?spotId=76255 Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
