Hello, I have been fighting with speedtouch and linux for the past four days, without success :-( Please, help me!
I tried to follow the instruction at http://benoit.papillault.free.fr/speedtouch/user.en.php3 The best I get is: [XXXX root]# pppd call adsl updetach using channel 2 Using interface ppp0 Connect: ppp0 <--> /dev/pts/7 sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf0a2f842>] ......... sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xf0a2f842>] LCP: timeout sending Config-Requests ---------------------------------------------- There is something wrong, I guess, with my installation/distro, since [XXXX root]# modprobe usbcore FATAL: Module usbcore not found. I am on Fedora Core2, Linux XXXX 2.6.5-1.358smp #1 SMP Sat May 8 09:25:36 EDT 2004 i686 i686 i386 GNU/Linux Also, it seems that dsmeg is alerting me on something, aa it outputs: PPP generic driver version 2.4.2 divert: not allocating divert_blk for non-ethernet device ppp0 HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 N_HDLC line discipline registered. usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Badness in local_bh_enable at kernel/softirq.c:136 Call Trace: [<02121d8e>] local_bh_enable+0x39/0x5c ....................................... divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 divert: not allocating divert_blk for non-ethernet device ppp1 ............................. Badness in local_bh_enable at kernel/softirq.c:136 Call Trace: [<02121d8e>] local_bh_enable+0x39/0x5c ............................... divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 PPP Deflate Compression module registered ------------------ Also, the alcatel modem seems to be seen, since [EMAIL PROTECTED] root]# cat /proc/bus/usb/devices .......................................... T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=06b9 ProdID=4061 Rev= 0.00 S: Manufacturer=ALCATEL S: Product=Speed Touch USB S: SerialNumber=0090D041AB57 C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=50ms I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl=0ms A problem with the driver (i took that one from Windows)? ......................................................... Is anybody over there able to give me some good hint? Thanks a lot Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
