hi, have been using the document 'speedtouch usb howto using benoit papillault's GPL drivers'
and benoits drivers to use a speedtouch 330 usb modem to connect on an adsl line, using suse 8, kernel version 2.4.20 The only difference was i used the rpm file with yast to install the software, but then carried on with the documents set up and run instructions. the modem works fine with windows, so i'm using the alcaudsl.sys file i found there all the bits seem to be in place, all goes well untill i run 'pppd call adsl updetach' - i've tried using pppoa3 and pppoa2 with similar results, the one shown here is with pppoa2 (it has been cycling through channels by the way, here it was trying channel 5 & 6) i then get the following messages: muswell:/usr # pppd call adsl updetach using channel 5 Using interface ppp0 Connect: ppp0 <--> /dev/pts/2 sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3575fdad>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3575fdad>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3575fdad>] <cut many idendical lines> sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3575fdad>] LCP: timeout sending Config-Requests Connection terminated. using channel 6 Using interface ppp0 Connect: ppp0 <--> /dev/pts/4 Script /usr/sbin/pppoa2 -vpi 0 -vci 38 finished (pid 2894), status = 0x0 sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x8231447e>] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x8231447e>] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x8231447e>] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x8231447e>] i do not understand what this is saying - how far in the process of connection to the modem and then to my isp (demon) does this signify etc. any suggestions would be most gratefully received, with thanks ruth Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
