>Jyrki Leppanen a �crit :
>> Jan 25 04:24:49 enigma pppd[2301]: Couldn't increase MTU to 1500
>> Jan 25 04:24:49 enigma pppd[2301]: Couldn't increase MRU to 1500
>> Jan 25 04:24:49 enigma pppd[2301]: local IP address 10.112.112.112
>> Jan 25 04:24:49 enigma pppd[2301]: remote IP address 10.112.112.113
>> Jan 25 04:24:58 enigma pppd[2301]: Couldn't increase MTU to 1500
>> Jan 25 04:24:58 enigma pppd[2301]: Couldn't increase MRU to 1500
>Is this your IP or did you replace it with some dumb values?
>The message about MRU seems strange.
>Did you get DNS numbers as well?
No, this is not my IP and I haven't entered those values anywhere. They just
appear as part of the ppp startup which, when my pervious system was
working, were allocated by my ISP from a pool of reserved addresses. So
definitely this is not from my ISP neither entered by myself. There is no
information about DNS numbers.
What is curious is that the modem has not yet been loaded with firmware and
is not able to communicate when those messages appear. I think I have to
start looking deeper into the start-up process.
>> Jan 25 04:25:00 enigma kernel: usb 1-1: new full speed USB device using
>> address 2
>> Jan 25 04:25:01 enigma kernel: usb 1-1: control timeout on ep0in
>This is a normal message if there is only once (each time you load the
>firmware).
Thank you for the info.
>Benoit PAPILLAULT
Regards,
Jyrki
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
