Hi,
I did what I planned for this weekend: I installed FC3 from scratch to a
different hardware and then I followed the steps mentioned in the webpage
http://linux-usb.sourceforge.net/SpeedTouch/fedora/core-3.html but the
result is exactly the same as before (except for the soundcard instability
problem, which does not exist in the new hardware):
1. The modem flashes the leds normally as firmware is loaded (I used the one
extracted from mgmt.o) and I received a message in the log saying that the
line is up.
kernel: usb 1-1: new full speed USB device using address 2
kernel: usb 1-1: control timeout on ep0in
kernel: usbcore: registered new driver speedtch
kernel: usb 1-1: found stage 1 firmware speedtch-1.bin
kernel: usb 1-1: found stage 2 firmware speedtch-2.bin
kernel: ADSL line is synchronising
kernel: DSL line goes up
kernel: ADSL line is up (512 Kib/s down | 128 Kib/s up)
2. the bridge and pppd are initiated long before the modem is detected and
firmware is uploaded:
RFC1483/2684 bridge: Interface "nas0" created sucessfully
RFC1483/2684 bridge: Communicating over ATM 0.0.35, encapsulation: LLC
RFC1483/2684 bridge: Interface configured
RFC1483/2684 bridge: RFC 1483/2684 bridge daemon started
pppd[2269]: Plugin rp-pppoe.so loaded.
pppd[2269]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2
pppd[2269]: pppd 2.4.2 started by root, uid 0
pppd[2269]: Using interface ppp0
pppd[2269]: Couldn't increase MTU to 1500
pppd[2269]: Couldn't increase MRU to 1500
pppd[2269]: local IP address 10.112.112.112
pppd[2269]: remote IP address 10.112.112.113
pppd[2269]: Starting link
pppd[2269]: PPP session is 1401
pppd[2269]: Connect: ppp0 <--> nas0
pppd[2269]: Couldn't increase MTU to 1500
pppd[2269]: Couldn't increase MRU to 1500
usb 1-1: new full speed USB device using address 2
pppd[2269]: peer from calling number 00:90:1A:40:A2:64 authorized
pppd[2269]: LCP terminated by peer
kernel: ADSL line is synchronising
pppd[2269]: Couldn't increase MTU to 1500
pppd[2269]: Couldn't increase MRU to 1500
kernel: DSL line goes up
kernel: ADSL line is up (512 Kib/s down | 128 Kib/s up)
kernel: PPP generic driver version 2.4.2
pppd[2269]: Connection terminated.
wait_for_sysfs[2258]: either wait_for_sysfs (udev 039) needs an update to
handle the device '/class/net/nas0' properly (no device symlink) or the
sysfs-support of your device's driver needs to be fixed, please report to
<[EMAIL PROTECTED]>
Jan 30 19:28:53 discordia pppd[2269]: Starting link
3. pppd repeatedly tries to open the connection without success and, once in
a while, the link drops.
pppd[2269]: Starting link
pppd[2269]: PPP session is 2141
pppd[2269]: Connect: ppp0 <--> nas0
pppd[2269]: Couldn't increase MTU to 1500
pppd[2269]: Couldn't increase MRU to 1500
pppd[2269]: peer from calling number 00:90:1A:40:A2:64 authorized
pppd[2269]: LCP terminated by peer
pppd[2269]: Couldn't increase MTU to 1500
pppd[2269]: Couldn't increase MRU to 1500
pppd[2269]: Connection terminated.
pppd[2269]: Exit.
kernel: device ppp0 left promiscuous mode
adsl-connect: ADSL connection lost; attempting re-connection.
kernel: br2684_create: register_netdev failed
RFC1483/2684 bridge: Interface "nas0" could not be created, reason: File
exists
RFC1483/2684 bridge: Communicating over ATM 0.0.35, encapsulation: LLC
RFC1483/2684 bridge: Fatal: failed to connect on socket
pppd[3559]: Plugin rp-pppoe.so loaded.
pppd[3559]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2
pppd[3559]: pppd 2.4.2 started by root, uid 0
pppd[3559]: Using interface ppp0
pppd[3559]: Couldn't increase MTU to 1500
pppd[3559]: Couldn't increase MRU to 1500
pppd[3559]: local IP address 10.112.112.112
pppd[3559]: remote IP address 10.112.112.113
pppd[3559]: Starting link
pppd[3559]: PPP session is 2162
4. Ethereal logs the following from nas0:
1 0.000000 ThomsonB_55:c5:18 Broadcast PPPoED
Active Discovery Initiation (PADI)
2 0.167038 Unispher_40:a2:64 ThomsonB_55:c5:18 PPPoED
Active Discovery Offer (PADO)
3 0.167455 ThomsonB_55:c5:18 Unispher_40:a2:64 PPPoED
Active Discovery Request (PADR)
4 0.426029 Unispher_40:a2:64 ThomsonB_55:c5:18 PPPoED
Active Discovery Session-confirmation (PADS)
5 0.427988 Unispher_40:a2:64 ThomsonB_55:c5:18 PPP LCP
Configuration Request
6 0.714484 ThomsonB_55:c5:18 Unispher_40:a2:64 PPP LCP
Configuration Request
7 0.718492 ThomsonB_55:c5:18 Unispher_40:a2:64 PPP LCP
Configuration Reject
8 0.733951 Unispher_40:a2:64 ThomsonB_55:c5:18 PPP LCP
Configuration Ack
9 0.736876 Unispher_40:a2:64 ThomsonB_55:c5:18 PPP LCP
Configuration Request
10 0.738637 ThomsonB_55:c5:18 Unispher_40:a2:64 PPP LCP
Configuration Ack
11 0.739070 ThomsonB_55:c5:18 Unispher_40:a2:64 PPP LCP
Echo Request
12 0.739963 ThomsonB_55:c5:18 Unispher_40:a2:64 PPP IPCP
Configuration Request
13 0.756940 Unispher_40:a2:64 ThomsonB_55:c5:18 PPP LCP
Termination Request
14 0.762177 ThomsonB_55:c5:18 Unispher_40:a2:64 PPP LCP
Termination Ack
15 0.791973 Unispher_40:a2:64 ThomsonB_55:c5:18 PPPoED
Active Discovery Terminate (PADT)
I tried to contact my ISP but got no help from there, they claim to support
only windows connections.
What is going on? What have I forgotten o done wrong?
Thanks in advance,
Jyrki
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
