Filipe Cruz wrote:
>Sorry...but if you can tell me how to do it I'll appreciate! :D > >Thanks! > > Well, I don't use hotplugging myself but you can try to add "speedtch" into /etc/hotplug/blacklist file. This should disable hotplugging for Speedtouch modem. >----- Original Message ----- >From: "Andrej Kristofic" <[EMAIL PROTECTED]> >To: <[email protected]> >Sent: Wednesday, March 02, 2005 10:58 PM >Subject: [speedtouch] Re: Suse 9.2 - Problems with modem Speedtouch 330 > > > > >>Filipe Cruz wrote: >> >> >> >>>Hello! I'm having some problems with modem speedtouch 330. >>> >>>My revision is 2.00. I've installed Suse 9.2 with no problems. After that >>>I follow the steps presented in the tutorial >>>(http://linux-usb.sourceforge.net/SpeedTouch/suse/index.html). I'm using >>>PPPoE for my connection. I'm from Portugal (my VPI is 0 and my VCI is 35). >>> >>>After all the steps I have rebooted the machine but when I wasn't able to >>>do this: "ping www.google.com" >>>So instead of executing the script I decided do run it command by command. >>> >>>After this: br2684ctl -b -c 0 -a 0.35 , I recieve this: >>> >>>linux: /home/CeRe4L #br2684ctl -b -c 0 -a 0.35 >>>RFC1483/2684 bridge: Interface 'nas0' could not be created, reason: File >>>Exists. >>>RFC1483/2684 bridge: Communication over ATM 0.0.35, encapsulation: LLC >>>RFC1483/2684 bridge: Fatal: failed to connect on socket >>> >>> >>> >>> >>These error messages indicate that 2684 bridge has already been >>created. I suspect, that problem is somewhere else. Maybe hotplugging >>script was ran before you issued the commands? Maybe you could try to >>turn hotplugging of for a while and try out. >> >> Regards Andrej Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
