Leonardo,
I use a Slack derivative with kernel 2.4.28 patched using Gilles
Espinasse's patch (search archive). I did also went through the
"remover" command line 14 error and fixed creating the required dir.
Regarding the speedtouch script under hotplug, I have not make it
work yet since te variable PEER_NAME (I think that's the name) is
undefined at boot time for some reason. Even if I manually define it I
got similar behavior as those you mention.
What I did was to create an executable file with pertinent info to
connect (vpi, vci, etc) (much like a windows dun entry) which is run
from rc.local. This file follows the logic in speedtouchconf.sh, so it
uses modem_run to load firmware.
So far it works fine this way.
Hope this help.
Alonso
Leonardo Ecco escribi�:
>A just imported the 2.4.29 config to this patched kernel and after
>that i got something strange when i try to use speedtouch-start.
>
>Any slacker here who has dealed with the same problem?
>
>Starting ADSL connection...
>using channel 8
>Using interface ppp0
>Connect: ppp0 <--> /dev/pts/0
>pppoe: send (sendPacket): Network is down
>sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>]
>sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>]
>pppoe: send (sendPacket): Network is down
>sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>]
>sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>]
>sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>]
>pppoe: send (sendPacket): Network is down
>sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>]
>sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>]
>sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>]
>sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>]
>sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa19b743b>]
>LCP: timeout sending Config-Requests
>Connection terminated.
>Serial link disconnected.
>using channel 9
>Using interface ppp0
>Connect: ppp0 <--> /dev/pts/1
>pppoe: send (sendPacket): Network is down
>sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x11f79b47>]
>pppoe: Timeout waiting for PADO packets
>Script pppoe -s -I `pppoa3 -vpi 0 -vci 35 -b` finished (pid 372), status = 0x1
>sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x11f79b47>]
>pppoe: send (sendPacket): Network is down
>sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x11f79b47>]
>sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x11f79b47>]
>sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x11f79b47>]
>pppoe: send (sendPacket): Network is down
>Terminating on signal 15.
>sent [LCP TermReq id=0x3 "User request"]
>sent [LCP TermReq id=0x4 "User request"]
>Connection terminated.
>pppoa3: no process killed
>disconnect script failed
>Waiting for 1 child processes...
> script pppoe -s -I `pppoa3 -vpi 0 -vci 35 -b`, pid 388
>pppoe: Timeout waiting for PADO packets
>Script pppoe -s -I `pppoa3 -vpi 0 -vci 35 -b` finished (pid 388), status = 0x1
>
>Liste de diffusion modem ALCATEL SpeedTouch USB
>Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
>
>
>
>
>
>
--
Outgoing mail is certified Virus Free.
Checked by AVG Anti-Virus (http://www.grisoft.com).
Version: 7.0.240 / Virus Database: 266.6.0 - Release Date: 2/3/05
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
