I've managed to install installed the correct source code and firmware, gone through all the setup and get so close, but this happens when i run speedtouch-start:
Modem hangup Connection terminated. using channel 1892 Using interface ppp0 Connect: ppp0 <--> /dev/pts/3 sent [LCP ConfReq id=0x7f <asyncmap 0x0> <magic 0x4df82b61>] Script pppoa3 -vpi 0 -vci 38 finished (pid 9728), status = 0xff Modem hangup Connection terminated. Couldn't get channel number: Input/output error Couldn't get channel number: Input/output error Couldn't get channel number: Input/output error using channel 1893 Using interface ppp0 Connect: ppp0 <--> /dev/pts/3 sent [LCP ConfReq id=0x80 <asyncmap 0x0> <magic 0xa890cbb6>] Script pppoa3 -vpi 0 -vci 38 finished (pid 9746), status = 0xff Script pppoa3 -vpi 0 -vci 38 finished (pid 9747), status = 0xff Script pppoa3 -vpi 0 -vci 38 finished (pid 9748), status = 0xff Script pppoa3 -vpi 0 -vci 38 finished (pid 9749), status = 0xff Modem hangup Connection terminated. I've run speedtouch-start several times and i keeps checking the channels, but has failed each and every time. Is a channel like a port? Should i just keep on running speedtouch-start until it finds the correct channel? I turned my pc off and then came back after a while. Thought that i'd keep running speedtouch-start and 'search' some more channels. But when i did speedtouch-start this time i got: [EMAIL PROTECTED] speedtouch]$ speedtouch-start You must launch this script with root privileges. Enter root password. Password: Uploading Speedtouch firmware ... [EMAIL PROTECTED] speedtouch]$ I get this consistantly now, I thought that maybe it'd connected with saying so, so I tried to browse the internet with Mozilla, it just said something like website not availible. Please help Matt Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
