On Sunday 20 November 2005 11:20, Duncan Sands wrote: > > As for the ping the behaviour is still the same if there is no traffic on > > the line :( > > So you don't get any messages like "urb xxxx failed" or anything like that? > (I added a few extra messages, hoping one of them would show up in your > logs!). Yes, there's something like that (see bellow) Nov 20 10:11:13 bsd /root/speedtouch/speedtouch.kernel/speedtouch/usbatm.c: usbatm_usb_init: driver version 1.9 Nov 20 10:11:56 bsd /root/speedtouch/speedtouch.kernel/speedtouch/speedtch.c: speedtch_usb_init: driver version 1.9 Nov 20 10:11:56 bsd speedtch 1-1:1.0: usbatm_usb_probe: trying driver speedtch with vendor=06b9, product=4061, ifnum 0 Nov 20 10:11:56 bsd speedtch 1-1:1.0: speedtch_bind entered Nov 20 10:11:56 bsd speedtch 1-1:1.0: isochronous transfer not supported - using bulk Nov 20 10:11:56 bsd speedtch 1-1:1.0: speedtch_bind: firmware not loaded Nov 20 10:11:56 bsd speedtch 1-1:1.0: usbatm_usb_probe: using 3392 byte buffer for channel 0xd53790a0 Nov 20 10:11:56 bsd speedtch 1-1:1.0: usbatm_usb_probe: using 3392 byte buffer for channel 0xd53790ec Nov 20 10:11:56 bsd ATM dev 0: speedtch_atm_start entered Nov 20 10:11:56 bsd ATM dev 0: speedtch_start_synchro entered Nov 20 10:11:56 bsd ATM dev 0: speedtch_start_synchro: modem prodded. 2 bytes returned: 00 00 Nov 20 10:11:56 bsd /root/speedtouch/speedtouch.kernel/speedtouch/usbatm.c: usbatm_get_instance Nov 20 10:11:56 bsd usbcore: registered new driver speedtch Nov 20 10:11:57 bsd ATM dev 0: speedtch_check_status: line state 0x08 Nov 20 10:11:57 bsd ATM dev 0: ADSL line is blocked? Nov 20 10:12:05 bsd ATM dev 0: usbatm_complete: urb 0xd3a51500 failed (-84)! Nov 20 10:12:05 bsd ATM dev 0: usbatm_complete: urb 0xd3a51380 failed (-84)! Nov 20 10:12:05 bsd usb 1-1: USB disconnect, address 6 Nov 20 10:12:05 bsd ATM dev 0: speedtch_handle_int entered Nov 20 10:12:05 bsd ATM dev 0: speedtch_handle_int: nonzero urb status -108! Nov 20 10:12:05 bsd ATM dev 0: usbatm_complete: urb 0xd3a515c0 failed (-108)! Nov 20 10:12:05 bsd ATM dev 0: usbatm_complete: urb 0xd3a51620 failed (-108)! Nov 20 10:12:05 bsd speedtch 1-1:1.0: usbatm_usb_disconnect entered Nov 20 10:12:05 bsd ATM dev 0: speedtch_atm_stop entered Nov 20 10:12:05 bsd speedtch 1-1:1.0: speedtch_unbind entered Nov 20 10:12:05 bsd speedtch 1-1:1.1: usbatm_usb_disconnect entered Nov 20 10:12:05 bsd speedtch 1-1:1.1: usbatm_usb_disconnect: NULL instance! Nov 20 10:12:05 bsd speedtch 1-1:1.2: usbatm_usb_disconnect entered Nov 20 10:12:05 bsd speedtch 1-1:1.2: usbatm_usb_disconnect: NULL instance! Nov 20 10:12:05 bsd /root/speedtouch/speedtouch.kernel/speedtouch/usbatm.c: usbatm_atm_dev_close Nov 20 10:12:05 bsd /root/speedtouch/speedtouch.kernel/speedtouch/usbatm.c: usbatm_put_instance Nov 20 10:12:05 bsd /root/speedtouch/speedtouch.kernel/speedtouch/usbatm.c: usbatm_put_instance Nov 20 10:12:05 bsd /root/speedtouch/speedtouch.kernel/speedtouch/usbatm.c: usbatm_destroy_instance Nov 20 10:12:29 bsd usb 1-1: new full speed USB device using uhci_hcd and address 7 Nov 20 10:12:29 bsd speedtch 1-1:1.0: usbatm_usb_probe: trying driver speedtch with vendor=06b9, product=4061, ifnum 0 Nov 20 10:12:29 bsd speedtch 1-1:1.0: speedtch_bind entered Nov 20 10:12:29 bsd speedtch 1-1:1.0: isochronous transfer not supported - using bulk Nov 20 10:12:29 bsd speedtch 1-1:1.0: speedtch_bind: firmware not loaded Nov 20 10:12:30 bsd usb 1-1: reset full speed USB device using uhci_hcd and address 7 Nov 20 10:12:30 bsd speedtch 1-1:1.0: usbatm_usb_probe: using 3392 byte buffer for channel 0xcfc5bea0 Nov 20 10:12:30 bsd speedtch 1-1:1.0: usbatm_usb_probe: using 3392 byte buffer for channel 0xcfc5beec Nov 20 10:12:30 bsd speedtch 1-1:1.0: speedtch_find_firmware: looking for speedtch-1.bin.0.00 Nov 20 10:12:30 bsd speedtch 1-1:1.0: speedtch_find_firmware: looking for speedtch-1.bin.0 Nov 20 10:12:30 bsd speedtch 1-1:1.0: speedtch_find_firmware: looking for speedtch-1.bin Nov 20 10:12:30 bsd speedtch 1-1:1.0: found stage 1 firmware speedtch-1.bin Nov 20 10:12:30 bsd speedtch 1-1:1.0: speedtch_find_firmware: looking for speedtch-2.bin.0.00 Nov 20 10:12:30 bsd speedtch 1-1:1.0: speedtch_find_firmware: looking for speedtch-2.bin.0 Nov 20 10:12:30 bsd speedtch 1-1:1.0: speedtch_find_firmware: looking for speedtch-2.bin Nov 20 10:12:31 bsd speedtch 1-1:1.0: found stage 2 firmware speedtch-2.bin Nov 20 10:12:31 bsd speedtch 1-1:1.0: speedtch_upload_firmware entered Nov 20 10:12:31 bsd speedtch 1-1:1.0: speedtch_upload_firmware: BLOCK1 uploaded (991 bytes) Nov 20 10:12:31 bsd speedtch 1-1:1.0: speedtch_upload_firmware: BLOCK2 downloaded (511 bytes) Nov 20 10:12:33 bsd speedtch 1-1:1.0: speedtch_upload_firmware: BLOCK3 uploaded (526187 bytes) Nov 20 10:12:33 bsd speedtch 1-1:1.0: speedtch_upload_firmware: BLOCK4 downloaded (511 bytes) Nov 20 10:12:34 bsd ATM dev 0: speedtch_atm_start entered Nov 20 10:12:34 bsd ATM dev 0: speedtch_start_synchro entered Nov 20 10:12:34 bsd ATM dev 0: speedtch_start_synchro: modem prodded. 2 bytes returned: 00 00 Nov 20 10:12:34 bsd /root/speedtouch/speedtouch.kernel/speedtouch/usbatm.c: usbatm_get_instance Nov 20 10:12:35 bsd ATM dev 0: speedtch_check_status: line state 0x10 Nov 20 10:12:35 bsd ATM dev 0: ADSL line is synchronising Nov 20 10:12:46 bsd ATM dev 0: speedtch_handle_int entered Nov 20 10:12:46 bsd ATM dev 0: DSL line goes up Nov 20 10:12:46 bsd ATM dev 0: speedtch_check_status: line state 0x20 Nov 20 10:12:46 bsd ATM dev 0: ADSL line is up (6144 kb/s down | 768 kb/s up) Nov 20 10:13:34 bsd ATM dev 0: usbatm_atm_open: vpi 8, vci 48 Nov 20 10:13:34 bsd ATM dev 0: usbatm_atm_open: allocated vcc data 0xd128e8e0
> > Ciao, > > D. > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se dИsinscrire : > mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dИsinscrire : mailto:[EMAIL PROTECTED]
