Thank You Gilles...For Help
But i try to find out any think about PAP or CHAP To Enable its...
And i chick The configuration too
and i didn't See any thing Wrong..!
Please can you till me how can i set my machine to accept PAP or CHAP...
And Thank you a lot
----------------------------------------------------------------------------
From: "Gilles Espinasse" <[EMAIL PROTECTED]>
Reply-To: [email protected]
To: <[email protected]>
Subject: [speedtouch] Re: MTU and MRU doesn't Increase ((logo file inside))
Date: Fri, 11 Aug 2006 23:19:10 +0200
MIME-Version: 1.0
Received: from ml.free.fr ([212.27.60.41]) by bay0-mc3-f19.bay0.hotmail.com
with Microsoft SMTPSVC(6.0.3790.2444); Fri, 11 Aug 2006 14:22:16 -0700
Received: from ml-g19 (localhost [127.0.0.1])by ml.free.fr (Postfix) with
ESMTPid A0D6EC32F2; Fri, 11 Aug 2006 22:16:13 +0200 (CEST)
Received: with LISTAR (v0.42; list speedtouch); Fri, 11 Aug 2006 22:16:13
+0200 (CEST)
Received: from smtp2-g19.free.fr (smtp2-g19.free.fr [212.27.42.28])by
ml.free.fr (Postfix) with ESMTP id 4961EC2874for <[email protected]>;
Fri, 11 Aug 2006 22:16:13 +0200 (CEST)
Received: from pii350 (vir91-2-82-236-101-3.fbx.proxad.net [82.236.101.3])by
smtp2-g19.free.fr (Postfix) with SMTP id 8814E75585for
<[email protected]>; Fri, 11 Aug 2006 23:22:04 +0200 (CEST)
>
>
>----- Original Message -----
>From: "VooDoo HaG" <[EMAIL PROTECTED]>
>To: <[email protected]>
>Sent: Friday, August 11, 2006 7:48 PM
>Subject: [speedtouch] MTU and MRU doesn't Increase ((logo file inside))
>
>
>>
>>
>>
>>Hi every
>>
>>My operating system is SUSE Linux 10.0
>>
>>and when i try to setup my usb modem ((330)) its look every thing all
>right
>>but after Restart
>>
>>and open the logo file i see that :-
>>
>>
>>
>>Aug 9 05:12:09 linux kernel: ATM dev 0: ADSL line is up (544 kb/s down |
>>160kb/s up)[IMG]
>>Aug 9 05:12:09 linux RFC1483/2684 bridge: Interface "nas0" created
>>successfully
>>Aug 9 05:12:09 linux RFC1483/2684 bridge: Communicating over ATM 0.0.35,
>>encapsulation: LLC
>>Aug 9 05:12:09 linux RFC1483/2684 bridge: Interface configured
>>Aug 9 05:12:09 linux RFC1483/2684 bridge: RFC 1483/2684 bridge daemon
>>started
>>Aug 9 05:12:14 linux ifup: No configuration found for nas0
>>Aug 9 05:12:22 linux pppd[6268]: Plugin rp-pppoe.so loaded.
>>Aug 9 05:12:22 linux pppd[6268]: RP-PPPoE plugin version 3.3 compiled
>>against pppd 2.4.3
>>Aug 9 05:12:22 linux kernel: NET: Registered protocol family 17
>>Aug 9 05:12:22 linux pppd[6268]: pppd 2.4.3 started by root, uid 0
>>Aug 9 05:12:22 linux pppd[6268]: PADS: Service-Name: ''
>>Aug 9 05:12:22 linux pppd[6268]: PPP session is 44075
>>Aug 9 05:12:23 linux kernel: NET: Registered protocol family 24
>>Aug 9 05:12:23 linux pppd[6268]: using channel 1
>>Aug 9 05:12:23 linux pppd[6268]: Using interface ppp0
>>Aug 9 05:12:23 linux pppd[6268]: Connect: ppp0 <--> nas0
>>Aug 9 05:12:23 linux pppd[6268]: Couldn't increase MTU to 1500
>>Aug 9 05:12:23 linux pppd[6268]: Couldn't increase MRU to 1500
>
>that's nothing
>It is a small bug in ppp wich is fixed in ppp-2.4.4
>Conventional ethernet frame is limited to 1500.
>Due to PPPoE overhead, MTU should be limited to 1492.
>The bug is that pppd try increase MTU to 1500 even when MTU is limited to
>1492.
>
>>Aug 9 05:12:23 linux pppd[6268]: sent [LCP ConfReq id=0x1 <magic
>>0xd8520c1b>]
>>Aug 9 05:12:23 linux pppd[6268]: rcvd [LCP ConfReq id=0xe <magic
>0x76fd07ee>
>><mru 1500> <auth chap MD5>]
>>Aug 9 05:12:23 linux pppd[6268]: No auth is possible
>
>That's the real problem, you have to set your machine to accept PAP or
CHAP.
>It's only something wrong on your configuration.
>You can't connect without authentification if the peer require one.
>
>Gilles
>
>
>Liste de diffusion modem ALCATEL SpeedTouch USB
>Pour se désinscrire :
mailto:[EMAIL PROTECTED]
>
>
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
