> I think you can't use br2684ctl without an atm > device to bridge. > > If you use br2684 and br2684ctl, you need speedtch > module. > You could support PPPoE by two differents ways: > - with modem_run and pppoa3 in bridged mode > or > - with modem_run, speedtch, br2684 and br2684ctl
hmm, this is really confusing, because I thought modem_run and speedtch were doing the same thing, actually loading the appropriate firmware into the modem. I actually think they bite each other if you use them together. > Then there is another choice, how support pppoe > - with pppoe user mode from rp-pppoe package > or > - with pppoe plugin. > But the two choices are independent. > > Look in > http://ipcop.cvs.sourceforge.net/ipcop/ipcop/src/rc.d/?hideattic=0 > at > - rc.alcatelusb for the solution with pppoa3 > - rc.alcatelusbk for the solution with br2684 and > speedtch > (there is too dirty workaround for usb troubles with > some usb controllers) > then to start pppoe, look at rc.red (perl script) in > doatmdial and dopppoedial. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
