Hello. First of all I would like to say that I'm a complete newbie at linux. Actually, I just installed it about three hours ago. I'm using the lastest Ubuntu ( 7.04) and I'm trying to config the modem.
My modem is the green old one. I believe it's revision 0. It is connected in a USB port and I have a HUB connected to a PCI ethernet adapter (so everyone in my house can use the internet). The instruction I've been following are at this site: . I did everything conform it was saying but, unfortunetely, I can't get it to work. As the author, my modem is temperamen tal, so I tried using both drivers he recomends (KQD6_3.012 and mgmt.o). Also, I've tried to use the firmware-extractor in the windows(?) driver (alcaudsl.sys), but it doesn't split the file. When I boot the computer, both LED's keep green and don't blink at anytime. >From what I've been reading, it might be a driver problem, right? My ISP settings: VPI - 1, VCI - 32, PPPOE. This is what I found at the logs that might be useful: [ 22.276305] hub 1-0:1.0: USB hub found (*** The hub isn't USB ***) [ 40.018838] usbcore: registered new interface driver speedtch [ 40.121293] speedtch 1-2:1.0: found stage 1 firmware speedtch-1.bin [ 40.305902] speedtch 1-2:1.0: found stage 2 firmware speedtch-2.bin Couldn't find any line about pppd. Now, should I follow other method to install the modem? Will I need to undo anything? Thank's, Felipe KW. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
