I installed OpenSuSE 10.2 on an Athec LT51 laptop. It seems that no script is activated to load the firmware on the Speedtouch 330 modem when it is plugged in. What I did was simply installing OpenSuSE 10.2 and after installation copying the binaries speedtch-1.bin and speetch-2.bin in /lib/firmware. On boot or on hotplugging, the modem is recognized, but after that no further action is taken by the system. Here the output from /var/log/messages.
Jul 7 14:10:34 AtemboPC kernel: usb 2-3: new full speed USB device using ohci_hcd and address 3 Jul 7 14:10:35 AtemboPC kernel: usb 2-3: new device found, idVendor=06b9, idProduct=4061 Jul 7 14:10:35 AtemboPC kernel: usb 2-3: new device strings: Mfr=1, Product=2, SerialNumber=3 Jul 7 14:10:35 AtemboPC kernel: usb 2-3: Product: Speed Touch 330 Jul 7 14:10:35 AtemboPC kernel: usb 2-3: Manufacturer: ALCATEL Jul 7 14:10:35 AtemboPC kernel: usb 2-3: SerialNumber: 0090D05EDE23 Jul 7 14:10:35 AtemboPC kernel: usb 2-3: configuration #1 chosen from 1 choice Normally, one might expect further messages like the following: Jul 7 14:10:35 AtemboPC firmware.sh[10651]: Cannot find firmware file 'speedtch-1.bin.2.00' Jul 7 14:10:35 AtemboPC firmware.sh[10655]: Cannot find firmware file 'speedtch-1.bin.2' Jul 7 14:10:35 AtemboPC kernel: speedtch 2-3:1.0: found stage 1 firmware speedtch-1.bin Jul 7 14:10:35 AtemboPC firmware.sh[10663]: Cannot find firmware file 'speedtch-2.bin.2.00' Jul 7 14:10:35 AtemboPC firmware.sh[10667]: Cannot find firmware file 'speedtch-2.bin.2' Jul 7 14:10:36 AtemboPC kernel: speedtch 2-3:1.0: found stage 2 firmware speedtch-2.bin Jul 7 14:10:40 AtemboPC kernel: ATM dev 0: ADSL line is synchronising Jul 7 14:10:51 AtemboPC kernel: ATM dev 0: DSL line goes up Jul 7 14:10:51 AtemboPC kernel: ATM dev 0: ADSL line is up (3072 kb/s down | 512 kb/s up) I had a look at the output of udevmonitor --env to see what happens when the modem is plugged in and I find, among a lot of output, the line: PHYSDEVDRIVER=usb Now I also have openSuSE 10.2 installed on a desktop, where the same speedtouch modem functions correctly and there the corresponding line reads: PHYSDEVDRIVER=speedtch Also, the module speedtch is not found on my laptop I am not at home with all the kernel business, so can someone please tell what is wrong on my laptop? Ed Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
