David Brownell wrote: > On Saturday 01 March 2008, Ned Forrester wrote: >> You can assign spi_device.chip_select=0 for all chips, and as >> long as you supply a unique >> spi_device->controller_data->pxa2xx_spi_chip.cs_control for each chip, >> chip select will work as intended. > > The SPI core would reject such an atrocity. :)
Well, if you are sure, I suppose it must be somewhere. I could only find a check for chip->chip_select >= master->num_chipselect in spi_new_device(), but not any comparison between chp_select values of different chips. Probably I don't know where to find all the files of the SPI core. -- Ned Forrester [EMAIL PROTECTED] Oceanographic Systems Lab 508-289-2226 Applied Ocean Physics and Engineering Dept. Woods Hole Oceanographic Institution Woods Hole, MA 02543, USA http://www.whoi.edu/sbl/liteSite.do?litesiteid=7212 http://www.whoi.edu/hpb/Site.do?id=1532 http://www.whoi.edu/page.do?pid=10079 ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ spi-devel-general mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/spi-devel-general
