> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of Anton Vorontsov > Sent: 2008?5?17? 0:51 > To: Kumar Gala; David Brownell; Pierre Ossman > Cc: [EMAIL PROTECTED]; > [email protected]; > [EMAIL PROTECTED]; Tabi Timur > Subject: [PATCH 3/4] [MMC] mmc_spi: add polling support for > the card detectline > > Some boards do not use interrupts on the CD line, so we want > to poll the CD and see if there was a change. 1 second poll > interval seems resonable. > > Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]> > --- > drivers/mmc/host/mmc_spi.c | 51
I want to know whether every card working well ? Because I'm working For 83xx MMC-over-SPI support, the presented concrete methods I used as you do, but only 256M card seems good, 512M or 1G/2G card all have some problems ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ spi-devel-general mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/spi-devel-general
