From: Jassi Brar <[email protected]> Since most of the chip-selects are simply going to be like gpio_set_value, it would do good to have the same callback type so that it could simply be made to point at gpio_set_value.
Signed-off-by: Jassi Brar <[email protected]> --- drivers/spi/spi_s3c64xx.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index 9fa0b99..32db695 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -300,13 +300,14 @@ static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd, if (sdd->tgl_spi != spi) { /* if last mssg on diff device */ /* Deselect the last toggled device */ cs = sdd->tgl_spi->controller_data; - cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1); + cs->set_level(cs->line, + spi->mode & SPI_CS_HIGH ? 0 : 1); } sdd->tgl_spi = NULL; } cs = spi->controller_data; - cs->set_level(spi->mode & SPI_CS_HIGH ? 1 : 0); + cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0); } static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd, @@ -386,7 +387,7 @@ static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd, if (sdd->tgl_spi == spi) sdd->tgl_spi = NULL; - cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1); + cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1); } static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) -- 1.6.2.5 ------------------------------------------------------------------------------ Throughout its 18-year history, RSA Conference consistently attracts the world's best and brightest in the field, creating opportunities for Conference attendees to learn about information security's most important issues through interactions with peers, luminaries and emerging and established companies. http://p.sf.net/sfu/rsaconf-dev2dev _______________________________________________ spi-devel-general mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/spi-devel-general
