From: Kevin Wells <[email protected]> Some of the fields in the pl022_chip_info structure used with the amba pl022 driver are no longer used. This patch removes those unused fields and adds the missing .mode flags to the spi_board_info structure.
Signed-off-by: Kevin Wells <[email protected]> --- arch/arm/mach-lpc32xx/phy3250.c | 7 +------ 1 files changed, 1 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index bc9a42d..0c936cf 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -172,18 +172,12 @@ static void phy3250_spi_cs_set(u32 control) } static struct pl022_config_chip spi0_chip_info = { - .lbm = LOOPBACK_DISABLED, .com_mode = INTERRUPT_TRANSFER, .iface = SSP_INTERFACE_MOTOROLA_SPI, .hierarchy = SSP_MASTER, .slave_tx_disable = 0, - .endian_tx = SSP_TX_LSB, - .endian_rx = SSP_RX_LSB, - .data_size = SSP_DATA_BITS_8, .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM, .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC, - .clk_phase = SSP_CLK_FIRST_EDGE, - .clk_pol = SSP_CLK_POL_IDLE_LOW, .ctrl_len = SSP_BITS_8, .wait_state = SSP_MWIRE_WAIT_ZERO, .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, @@ -239,6 +233,7 @@ static int __init phy3250_spi_board_register(void) .max_speed_hz = 5000000, .bus_num = 0, .chip_select = 0, + .mode = SPI_MODE_0, .platform_data = &eeprom, .controller_data = &spi0_chip_info, }, -- 1.7.2.2 ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ spi-devel-general mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/spi-devel-general
