Hi,
Previous my question included mistake.
I show modified below.
insmod spi_topcliff_pch.ko(Then, both /dev/spidev0.0/1.0 are created with
success)
rmmod spi_topcliff_pch.ko (Then, both /dev/spidev0.0/1.0 are NOT deleted.)
insmod spi_topcliff_pch.ko(Then, kernel error occurred. Attached err_log)
I attached source code(power management is not updated) and kernel error log.
Do you have any information about the above ?
With Best Regards,
-----------------------------------------
Tomoya MORINAGA
OKI SEMICONDUCTOR CO., LTD.
> -----Original Message-----
> From: Tomoya MORINAGA [mailto:[email protected]]
> Sent: Tuesday, February 22, 2011 10:22 AM
> To: 'David Brownell'; 'Grant Likely';
> '[email protected]';
> '[email protected]'
> Cc: '[email protected]'; '[email protected]';
> '[email protected]'; '[email protected]'; Toshiharu Okada
> Subject: spi_topcliff_pch: reload issue
>
> Hi,
>
> issue: after reload the spi module, it can't do SPI communication.
>
> We have faced issue when execute the following command.
> insmod xxx.ko(Then, /dev/spidev0.0 is created with success)
> rmmod xxx.ko (Then, /dev/spidev0.0 is deleted with success)
> insmod xxx.ko(Then, /dev/spidev0.0 is created, however, below
> error message is showed)
>
> 0000:02:0c.1: registered master spi0
> 0000:02:0c.1: chipselect 0 already in use
> 0000:02:0c.1: can't create new device for spidev
>
> Do you have any information about the above ?
>
> kernel=2.6.37 on FC14
>
> With Best Regards,
> -----------------------------------------
> Tomoya MORINAGA
> OKI SEMICONDUCTOR CO., LTD.
/*
* SPI bus driver for the Topcliff PCH used by Intel SoCs
*
* Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/wait.h>
#include <linux/spi/spi.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/spi/spidev.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/platform_device.h>
/* Register offsets */
#define PCH_SPCR 0x00 /* SPI control register */
#define PCH_SPBRR 0x04 /* SPI baud rate register */
#define PCH_SPSR 0x08 /* SPI status register */
#define PCH_SPDWR 0x0C /* SPI write data register */
#define PCH_SPDRR 0x10 /* SPI read data register */
#define PCH_SSNXCR 0x18 /* SSN Expand Control Register */
#define PCH_SRST 0x1C /* SPI reset register */
#define PCH_SPI_ADDRESS_SIZE 0x20
#define PCH_SPSR_TFD 0x000007C0
#define PCH_SPSR_RFD 0x0000F800
#define PCH_READABLE(x) (((x) & PCH_SPSR_RFD)>>11)
#define PCH_WRITABLE(x) (((x) & PCH_SPSR_TFD)>>6)
#define PCH_RX_THOLD 7
#define PCH_RX_THOLD_MAX 15
#define PCH_MAX_BAUDRATE 5000000
#define PCH_MAX_FIFO_DEPTH 16
#define STATUS_RUNNING 1
#define STATUS_EXITING 2
#define PCH_SLEEP_TIME 10
#define PCH_ADDRESS_SIZE 0x20
#define SSN_LOW 0x02U
#define SSN_NO_CONTROL 0x00U
#define PCH_MAX_CS 0xFF
#define PCI_DEVICE_ID_GE_SPI 0x8816
#define SPCR_SPE_BIT (1 << 0)
#define SPCR_MSTR_BIT (1 << 1)
#define SPCR_LSBF_BIT (1 << 4)
#define SPCR_CPHA_BIT (1 << 5)
#define SPCR_CPOL_BIT (1 << 6)
#define SPCR_TFIE_BIT (1 << 8)
#define SPCR_RFIE_BIT (1 << 9)
#define SPCR_FIE_BIT (1 << 10)
#define SPCR_ORIE_BIT (1 << 11)
#define SPCR_MDFIE_BIT (1 << 12)
#define SPCR_FICLR_BIT (1 << 24)
#define SPSR_TFI_BIT (1 << 0)
#define SPSR_RFI_BIT (1 << 1)
#define SPSR_FI_BIT (1 << 2)
#define SPBRR_SIZE_BIT (1 << 10)
#define PCH_ALL
(SPCR_TFIE_BIT|SPCR_RFIE_BIT|SPCR_FIE_BIT|SPCR_ORIE_BIT|SPCR_MDFIE_BIT)
#define SPCR_RFIC_FIELD 20
#define SPCR_TFIC_FIELD 16
#define SPSR_INT_BITS 0x1F
#define MASK_SPBRR_SPBR_BITS (~((1 << 10) - 1))
#define MASK_RFIC_SPCR_BITS (~(0xf << 20))
#define MASK_TFIC_SPCR_BITS (~(0xf000f << 12))
#define PCH_CLOCK_HZ 50000000
#define PCH_MAX_SPBR 1023
/* Definition for ML7213 by OKI SEMICONDUCTOR */
#define PCI_VENDOR_ID_ROHM 0x10DB
#define PCI_DEVICE_ID_ML7213_SPI 0x802c
/*
* Set the number of SPI instance max
* Intel EG20T PCH : 1ch
* OKI SEMICONDUCTOR ML7213 IOH : 2ch
*/
#define PCH_SPI_MAX_DEV 2
/**
* struct pch_spi_data - Holds the SPI channel specific details
* @io_remap_addr: The remapped PCI base address
* @master: Pointer to the SPI master structure
* @work: Reference to work queue handler
* @wk: Workqueue for carrying out execution of the
* requests
* @wait: Wait queue for waking up upon receiving an
* interrupt.
* @transfer_complete: Status of SPI Transfer
* @bcurrent_msg_processing: Status flag for message processing
* @lock: Lock for protecting this structure
* @queue: SPI Message queue
* @status: Status of the SPI driver
* @bpw_len: Length of data to be transferred in bits per
* word
* @transfer_active: Flag showing active transfer
* @tx_index: Transmit data count; for bookkeeping during
* transfer
* @rx_index: Receive data count; for bookkeeping during
* transfer
* @tx_buff: Buffer for data to be transmitted
* @rx_index: Buffer for Received data
* @n_curnt_chip: The chip number that this SPI driver currently
* operates on
* @current_chip: Reference to the current chip that this SPI
* driver currently operates on
* @current_msg: The current message that this SPI driver is
* handling
* @cur_trans: The current transfer that this SPI driver is
* handling
* @board_dat: Reference to the SPI device data structure
* @plat_dev: platform_device structure
* @ch: SPI channel number
*/
struct pch_spi_data {
void __iomem *io_remap_addr;
struct spi_master *master;
struct work_struct work;
struct workqueue_struct *wk;
wait_queue_head_t wait;
u8 transfer_complete;
u8 bcurrent_msg_processing;
spinlock_t lock;
struct list_head queue;
u8 status;
u32 bpw_len;
u8 transfer_active;
u32 tx_index;
u32 rx_index;
u16 *pkt_tx_buff;
u16 *pkt_rx_buff;
u8 n_curnt_chip;
struct spi_device *current_chip;
struct spi_message *current_msg;
struct spi_transfer *cur_trans;
struct pch_spi_board_data *board_dat;
struct platform_device *plat_dev;
int ch;
};
/**
* struct pch_spi_board_data - Holds the SPI device specific details
* @pdev: Pointer to the PCI device
* @irq_reg_sts: Status of IRQ registration
* @pci_req_sts: Status of pci_request_regions
* @suspend_sts: Status of suspend
* @data: Pointer to SPI channel data structure
* @num: The number of SPI device instance
*/
struct pch_spi_board_data {
struct pci_dev *pdev;
u8 irq_reg_sts;
u8 pci_req_sts;
u8 suspend_sts;
struct pch_spi_data *data;
int num;
};
static struct pci_device_id pch_spi_pcidev_id[] = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_GE_SPI), 1, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_SPI), 2, },
{ }
};
/**
* pch_spi_writereg() - Performs register writes
* @master: Pointer to struct spi_master.
* @idx: Register offset.
* @val: Value to be written to register.
*/
static inline void pch_spi_writereg(struct spi_master *master, int idx, u32 val)
{
struct pch_spi_data *data = spi_master_get_devdata(master);
iowrite32(val, (data->io_remap_addr + idx));
}
/**
* pch_spi_readreg() - Performs register reads
* @master: Pointer to struct spi_master.
* @idx: Register offset.
*/
static inline u32 pch_spi_readreg(struct spi_master *master, int idx)
{
struct pch_spi_data *data = spi_master_get_devdata(master);
return ioread32(data->io_remap_addr + idx);
}
static inline void pch_spi_setclr_reg(struct spi_master *master, int idx,
u32 set, u32 clr)
{
u32 tmp = pch_spi_readreg(master, idx);
tmp = (tmp & ~clr) | set;
pch_spi_writereg(master, idx, tmp);
}
static void pch_spi_set_master_mode(struct spi_master *master)
{
pch_spi_setclr_reg(master, PCH_SPCR, SPCR_MSTR_BIT, 0);
}
/**
* pch_spi_clear_fifo() - Clears the Transmit and Receive FIFOs
* @master: Pointer to struct spi_master.
*/
static void pch_spi_clear_fifo(struct spi_master *master)
{
pch_spi_setclr_reg(master, PCH_SPCR, SPCR_FICLR_BIT, 0);
pch_spi_setclr_reg(master, PCH_SPCR, 0, SPCR_FICLR_BIT);
}
static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val,
void __iomem *io_remap_addr)
{
u32 n_read, tx_index, rx_index, bpw_len;
u16 *pkt_rx_buffer, *pkt_tx_buff;
int read_cnt;
u32 reg_spcr_val;
void __iomem *spsr;
void __iomem *spdrr;
void __iomem *spdwr;
spsr = io_remap_addr + PCH_SPSR;
iowrite32(reg_spsr_val, spsr);
if (data->transfer_active) {
rx_index = data->rx_index;
tx_index = data->tx_index;
bpw_len = data->bpw_len;
pkt_rx_buffer = data->pkt_rx_buff;
pkt_tx_buff = data->pkt_tx_buff;
spdrr = io_remap_addr + PCH_SPDRR;
spdwr = io_remap_addr + PCH_SPDWR;
n_read = PCH_READABLE(reg_spsr_val);
for (read_cnt = 0; (read_cnt < n_read); read_cnt++) {
pkt_rx_buffer[rx_index++] = ioread32(spdrr);
if (tx_index < bpw_len)
iowrite32(pkt_tx_buff[tx_index++], spdwr);
}
/* disable RFI if not needed */
if ((bpw_len - rx_index) <= PCH_MAX_FIFO_DEPTH) {
reg_spcr_val = ioread32(io_remap_addr + PCH_SPCR);
reg_spcr_val &= ~SPCR_RFIE_BIT; /* disable RFI */
/* reset rx threshold */
reg_spcr_val &= MASK_RFIC_SPCR_BITS;
reg_spcr_val |= (PCH_RX_THOLD_MAX << SPCR_RFIC_FIELD);
iowrite32(((reg_spcr_val) &= (~(SPCR_RFIE_BIT))),
(io_remap_addr + PCH_SPCR));
}
/* update counts */
data->tx_index = tx_index;
data->rx_index = rx_index;
}
/* if transfer complete interrupt */
if (reg_spsr_val & SPSR_FI_BIT) {
/* disable FI & RFI interrupts */
pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
SPCR_FIE_BIT | SPCR_RFIE_BIT);
/* transfer is completed;inform pch_spi_process_messages */
data->transfer_complete = true;
wake_up(&data->wait);
}
}
/**
* pch_spi_handler() - Interrupt handler
* @irq: The interrupt number.
* @dev_id: Pointer to struct pch_spi_board_data.
*/
static irqreturn_t pch_spi_handler(int irq, void *dev_id)
{
u32 reg_spsr_val;
struct pch_spi_data *data;
void __iomem *spsr;
void __iomem *io_remap_addr;
irqreturn_t ret = IRQ_NONE;
struct pch_spi_board_data *board_dat = dev_id;
if (board_dat->suspend_sts) {
dev_dbg(&board_dat->pdev->dev,
"%s returning due to suspend\n", __func__);
return IRQ_NONE;
}
data = board_dat->data;
io_remap_addr = data->io_remap_addr;
spsr = io_remap_addr + PCH_SPSR;
reg_spsr_val = ioread32(spsr);
/* Check if the interrupt is for SPI device */
if (reg_spsr_val & (SPSR_FI_BIT | SPSR_RFI_BIT)) {
pch_spi_handler_sub(data, reg_spsr_val, io_remap_addr);
ret = IRQ_HANDLED;
}
dev_dbg(&board_dat->pdev->dev, "%s EXIT return value=%d\n",
__func__, ret);
return ret;
}
/**
* pch_spi_set_baud_rate() - Sets SPBR field in SPBRR
* @master: Pointer to struct spi_master.
* @speed_hz: Baud rate.
*/
static void pch_spi_set_baud_rate(struct spi_master *master, u32 speed_hz)
{
u32 n_spbr = PCH_CLOCK_HZ / (speed_hz * 2);
/* if baud rate is less than we can support limit it */
if (n_spbr > PCH_MAX_SPBR)
n_spbr = PCH_MAX_SPBR;
pch_spi_setclr_reg(master, PCH_SPBRR, n_spbr, ~MASK_SPBRR_SPBR_BITS);
}
/**
* pch_spi_set_bits_per_word() - Sets SIZE field in SPBRR
* @master: Pointer to struct spi_master.
* @bits_per_word: Bits per word for SPI transfer.
*/
static void pch_spi_set_bits_per_word(struct spi_master *master,
u8 bits_per_word)
{
if (bits_per_word == 8)
pch_spi_setclr_reg(master, PCH_SPBRR, 0, SPBRR_SIZE_BIT);
else
pch_spi_setclr_reg(master, PCH_SPBRR, SPBRR_SIZE_BIT, 0);
}
/**
* pch_spi_setup_transfer() - Configures the PCH SPI hardware for transfer
* @spi: Pointer to struct spi_device.
*/
static void pch_spi_setup_transfer(struct spi_device *spi)
{
u32 flags = 0;
dev_dbg(&spi->dev, "%s SPBRR content =%x setting baud rate=%d\n",
__func__, pch_spi_readreg(spi->master, PCH_SPBRR),
spi->max_speed_hz);
pch_spi_set_baud_rate(spi->master, spi->max_speed_hz);
/* set bits per word */
pch_spi_set_bits_per_word(spi->master, spi->bits_per_word);
if (!(spi->mode & SPI_LSB_FIRST))
flags |= SPCR_LSBF_BIT;
if (spi->mode & SPI_CPOL)
flags |= SPCR_CPOL_BIT;
if (spi->mode & SPI_CPHA)
flags |= SPCR_CPHA_BIT;
pch_spi_setclr_reg(spi->master, PCH_SPCR, flags,
(SPCR_LSBF_BIT | SPCR_CPOL_BIT | SPCR_CPHA_BIT));
/* Clear the FIFO by toggling FICLR to 1 and back to 0 */
pch_spi_clear_fifo(spi->master);
}
/**
* pch_spi_reset() - Clears SPI registers
* @master: Pointer to struct spi_master.
*/
static void pch_spi_reset(struct spi_master *master)
{
/* write 1 to reset SPI */
pch_spi_writereg(master, PCH_SRST, 0x1);
/* clear reset */
pch_spi_writereg(master, PCH_SRST, 0x0);
}
static int pch_spi_setup(struct spi_device *pspi)
{
/* check bits per word */
if (pspi->bits_per_word == 0) {
pspi->bits_per_word = 8;
dev_dbg(&pspi->dev, "%s 8 bits per word\n", __func__);
}
if ((pspi->bits_per_word != 8) && (pspi->bits_per_word != 16)) {
dev_err(&pspi->dev, "%s Invalid bits per word\n", __func__);
return -EINVAL;
}
/* Check baud rate setting */
/* if baud rate of chip is greater than
max we can support,return error */
if ((pspi->max_speed_hz) > PCH_MAX_BAUDRATE)
pspi->max_speed_hz = PCH_MAX_BAUDRATE;
dev_dbg(&pspi->dev, "%s MODE = %x\n", __func__,
(pspi->mode) & (SPI_CPOL | SPI_CPHA));
return 0;
}
static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
{
struct spi_transfer *transfer;
struct pch_spi_data *data = spi_master_get_devdata(pspi->master);
int retval;
unsigned long flags;
/* validate spi message and baud rate */
if (unlikely(list_empty(&pmsg->transfers) == 1)) {
dev_err(&pspi->dev, "%s list empty\n", __func__);
retval = -EINVAL;
goto err_out;
}
if (unlikely(pspi->max_speed_hz == 0)) {
dev_err(&pspi->dev, "%s pch_spi_tranfer maxspeed=%d\n",
__func__, pspi->max_speed_hz);
retval = -EINVAL;
goto err_out;
}
dev_dbg(&pspi->dev, "%s Transfer List not empty. "
"Transfer Speed is set.\n", __func__);
/* validate Tx/Rx buffers and Transfer length */
list_for_each_entry(transfer, &pmsg->transfers, transfer_list) {
if (!transfer->tx_buf && !transfer->rx_buf) {
dev_err(&pspi->dev,
"%s Tx and Rx buffer NULL\n", __func__);
retval = -EINVAL;
goto err_out;
}
if (!transfer->len) {
dev_err(&pspi->dev, "%s Transfer length invalid\n",
__func__);
retval = -EINVAL;
goto err_out;
}
dev_dbg(&pspi->dev, "%s Tx/Rx buffer valid. Transfer length"
" valid\n", __func__);
/* if baud rate hs been specified validate the same */
if (transfer->speed_hz > PCH_MAX_BAUDRATE)
transfer->speed_hz = PCH_MAX_BAUDRATE;
/* if bits per word has been specified validate the same */
if (transfer->bits_per_word) {
if ((transfer->bits_per_word != 8)
&& (transfer->bits_per_word != 16)) {
retval = -EINVAL;
dev_err(&pspi->dev,
"%s Invalid bits per word\n", __func__);
goto err_out;
}
}
}
spin_lock_irqsave(&data->lock, flags);
/* We won't process any messages if we have been asked to terminate */
if (data->status == STATUS_EXITING) {
dev_err(&pspi->dev, "%s status = STATUS_EXITING.\n", __func__);
retval = -ESHUTDOWN;
goto err_return_spinlock;
}
/* If suspended ,return -EINVAL */
if (data->board_dat->suspend_sts) {
dev_err(&pspi->dev, "%s suspend; returning EINVAL\n", __func__);
retval = -EINVAL;
goto err_return_spinlock;
}
/* set status of message */
pmsg->actual_length = 0;
dev_dbg(&pspi->dev, "%s - pmsg->status =%d\n", __func__, pmsg->status);
pmsg->status = -EINPROGRESS;
/* add message to queue */
list_add_tail(&pmsg->queue, &data->queue);
dev_dbg(&pspi->dev, "%s - Invoked list_add_tail\n", __func__);
/* schedule work queue to run */
queue_work(data->wk, &data->work);
dev_dbg(&pspi->dev, "%s - Invoked queue work\n", __func__);
retval = 0;
err_return_spinlock:
spin_unlock_irqrestore(&data->lock, flags);
err_out:
dev_dbg(&pspi->dev, "%s RETURN=%d\n", __func__, retval);
return retval;
}
static inline void pch_spi_select_chip(struct pch_spi_data *data,
struct spi_device *pspi)
{
if (data->current_chip != NULL) {
if (pspi->chip_select != data->n_curnt_chip) {
dev_dbg(&pspi->dev, "%s : different slave\n", __func__);
data->current_chip = NULL;
}
}
data->current_chip = pspi;
data->n_curnt_chip = data->current_chip->chip_select;
dev_dbg(&pspi->dev, "%s :Invoking pch_spi_setup_transfer\n", __func__);
pch_spi_setup_transfer(pspi);
}
static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw,
struct spi_message **ppmsg)
{
int size;
u32 n_writes;
int j;
struct spi_message *pmsg;
const u8 *tx_buf;
const u16 *tx_sbuf;
pmsg = *ppmsg;
/* set baud rate if needed */
if (data->cur_trans->speed_hz) {
dev_dbg(&data->master->dev, "%s:setting baud rate\n", __func__);
pch_spi_set_baud_rate(data->master, data->cur_trans->speed_hz);
}
/* set bits per word if needed */
if (data->cur_trans->bits_per_word &&
(data->current_msg->spi->bits_per_word !=
data->cur_trans->bits_per_word)) {
dev_dbg(&data->master->dev, "%s:set bits per word\n", __func__);
pch_spi_set_bits_per_word(data->master,
data->cur_trans->bits_per_word);
*bpw = data->cur_trans->bits_per_word;
} else {
*bpw = data->current_msg->spi->bits_per_word;
}
/* reset Tx/Rx index */
data->tx_index = 0;
data->rx_index = 0;
data->bpw_len = data->cur_trans->len / (*bpw / 8);
/* find alloc size */
size = data->cur_trans->len * sizeof(*data->pkt_tx_buff);
/* allocate memory for pkt_tx_buff & pkt_rx_buffer */
data->pkt_tx_buff = kzalloc(size, GFP_KERNEL);
if (data->pkt_tx_buff != NULL) {
data->pkt_rx_buff = kzalloc(size, GFP_KERNEL);
if (!data->pkt_rx_buff)
kfree(data->pkt_tx_buff);
}
if (!data->pkt_rx_buff) {
/* flush queue and set status of all transfers to -ENOMEM */
dev_err(&data->master->dev, "%s :kzalloc failed\n", __func__);
list_for_each_entry(pmsg, data->queue.next, queue) {
pmsg->status = -ENOMEM;
if (pmsg->complete != 0)
pmsg->complete(pmsg->context);
/* delete from queue */
list_del_init(&pmsg->queue);
}
return;
}
/* copy Tx Data */
if (data->cur_trans->tx_buf != NULL) {
if (*bpw == 8) {
tx_buf = data->cur_trans->tx_buf;
for (j = 0; j < data->bpw_len; j++)
data->pkt_tx_buff[j] = *tx_buf++;
} else {
tx_sbuf = data->cur_trans->tx_buf;
for (j = 0; j < data->bpw_len; j++)
data->pkt_tx_buff[j] = *tx_sbuf++;
}
}
/* if len greater than PCH_MAX_FIFO_DEPTH, write 16,else len bytes */
n_writes = data->bpw_len;
if (n_writes > PCH_MAX_FIFO_DEPTH)
n_writes = PCH_MAX_FIFO_DEPTH;
dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing "
"0x2 to SSNXCR\n", __func__);
pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW);
for (j = 0; j < n_writes; j++)
pch_spi_writereg(data->master, PCH_SPDWR, data->pkt_tx_buff[j]);
/* update tx_index */
data->tx_index = j;
/* reset transfer complete flag */
data->transfer_complete = false;
data->transfer_active = true;
}
static void pch_spi_nomore_transfer(struct pch_spi_data *data,
struct spi_message *pmsg)
{
dev_dbg(&data->master->dev, "%s called\n", __func__);
/* Invoke complete callback
* [To the spi core..indicating end of transfer] */
data->current_msg->status = 0;
if (data->current_msg->complete != 0) {
dev_dbg(&data->master->dev,
"%s:Invoking callback of SPI core\n", __func__);
data->current_msg->complete(data->current_msg->context);
}
/* update status in global variable */
data->bcurrent_msg_processing = false;
dev_dbg(&data->master->dev,
"%s:data->bcurrent_msg_processing = false\n", __func__);
data->current_msg = NULL;
data->cur_trans = NULL;
/* check if we have items in list and not suspending
* return 1 if list empty */
if ((list_empty(&data->queue) == 0) &&
(!data->board_dat->suspend_sts) &&
(data->status != STATUS_EXITING)) {
/* We have some more work to do (either there is more tranint
* bpw;sfer requests in the current message or there are
*more messages)
*/
dev_dbg(&data->master->dev, "%s:Invoke queue_work\n", __func__);
queue_work(data->wk, &data->work);
} else if (data->board_dat->suspend_sts ||
data->status == STATUS_EXITING) {
dev_dbg(&data->master->dev,
"%s suspend/remove initiated, flushing queue\n",
__func__);
list_for_each_entry(pmsg, data->queue.next, queue) {
pmsg->status = -EIO;
if (pmsg->complete)
pmsg->complete(pmsg->context);
/* delete from queue */
list_del_init(&pmsg->queue);
}
}
}
static void pch_spi_set_ir(struct pch_spi_data *data)
{
/* enable interrupts */
if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) {
/* set receive threshold to PCH_RX_THOLD */
pch_spi_setclr_reg(data->master, PCH_SPCR,
PCH_RX_THOLD << SPCR_RFIC_FIELD,
~MASK_RFIC_SPCR_BITS);
/* enable FI and RFI interrupts */
pch_spi_setclr_reg(data->master, PCH_SPCR,
SPCR_RFIE_BIT | SPCR_FIE_BIT, 0);
} else {
/* set receive threshold to maximum */
pch_spi_setclr_reg(data->master, PCH_SPCR,
PCH_RX_THOLD_MAX << SPCR_TFIC_FIELD,
~MASK_TFIC_SPCR_BITS);
/* enable FI interrupt */
pch_spi_setclr_reg(data->master, PCH_SPCR, SPCR_FIE_BIT, 0);
}
dev_dbg(&data->master->dev,
"%s:invoking pch_spi_set_enable to enable SPI\n", __func__);
/* SPI set enable */
pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, SPCR_SPE_BIT,
0);
/* Wait until the transfer completes; go to sleep after
initiating the transfer. */
dev_dbg(&data->master->dev,
"%s:waiting for transfer to get over\n", __func__);
wait_event_interruptible(data->wait, data->transfer_complete);
pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
dev_dbg(&data->master->dev,
"%s:no more control over SSN-writing 0 to SSNXCR.", __func__);
data->transfer_active = false;
dev_dbg(&data->master->dev,
"%s set data->transfer_active = false\n", __func__);
/* clear all interrupts */
pch_spi_writereg(data->master, PCH_SPSR,
pch_spi_readreg(data->master, PCH_SPSR));
/* disable interrupts */
pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL);
}
static void pch_spi_copy_rx_data(struct pch_spi_data *data, int bpw)
{
int j;
u8 *rx_buf;
u16 *rx_sbuf;
/* copy Rx Data */
if (!data->cur_trans->rx_buf)
return;
if (bpw == 8) {
rx_buf = data->cur_trans->rx_buf;
for (j = 0; j < data->bpw_len; j++)
*rx_buf++ = data->pkt_rx_buff[j] & 0xFF;
} else {
rx_sbuf = data->cur_trans->rx_buf;
for (j = 0; j < data->bpw_len; j++)
*rx_sbuf++ = data->pkt_rx_buff[j];
}
}
static void pch_spi_process_messages(struct work_struct *pwork)
{
struct spi_message *pmsg;
struct pch_spi_data *data;
int bpw;
data = container_of(pwork, struct pch_spi_data, work);
dev_dbg(&data->master->dev, "%s data initialized\n", __func__);
spin_lock(&data->lock);
/* check if suspend has been initiated;if yes flush queue */
if (data->board_dat->suspend_sts || (data->status == STATUS_EXITING)) {
dev_dbg(&data->master->dev,
"%s suspend/remove initiated,flushing queue\n",
__func__);
list_for_each_entry(pmsg, data->queue.next, queue) {
pmsg->status = -EIO;
if (pmsg->complete != 0) {
spin_unlock(&data->lock);
pmsg->complete(pmsg->context);
spin_lock(&data->lock);
}
/* delete from queue */
list_del_init(&pmsg->queue);
}
spin_unlock(&data->lock);
return;
}
data->bcurrent_msg_processing = true;
dev_dbg(&data->master->dev,
"%s Set data->bcurrent_msg_processing= true\n", __func__);
/* Get the message from the queue and delete it from there. */
data->current_msg = list_entry(data->queue.next, struct spi_message,
queue);
list_del_init(&data->current_msg->queue);
data->current_msg->status = 0;
pch_spi_select_chip(data, data->current_msg->spi);
spin_unlock(&data->lock);
do {
/* If we are already processing a message get the next
transfer structure from the message otherwise retrieve
the 1st transfer request from the message. */
spin_lock(&data->lock);
if (data->cur_trans == NULL) {
data->cur_trans =
list_entry(data->current_msg->transfers.
next, struct spi_transfer,
transfer_list);
dev_dbg(&data->master->dev,
"%s :Getting 1st transfer message\n", __func__);
} else {
data->cur_trans =
list_entry(data->cur_trans->transfer_list.next,
struct spi_transfer,
transfer_list);
dev_dbg(&data->master->dev,
"%s :Getting next transfer message\n",
__func__);
}
spin_unlock(&data->lock);
pch_spi_set_tx(data, &bpw, &pmsg);
/* Control interrupt*/
pch_spi_set_ir(data);
/* Disable SPI transfer */
pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, 0,
SPCR_SPE_BIT);
/* clear FIFO */
pch_spi_clear_fifo(data->master);
/* copy Rx Data */
pch_spi_copy_rx_data(data, bpw);
/* free memory */
kfree(data->pkt_rx_buff);
data->pkt_rx_buff = NULL;
kfree(data->pkt_tx_buff);
data->pkt_tx_buff = NULL;
/* increment message count */
data->current_msg->actual_length += data->cur_trans->len;
dev_dbg(&data->master->dev,
"%s:data->current_msg->actual_length=%d\n",
__func__, data->current_msg->actual_length);
/* check for delay */
if (data->cur_trans->delay_usecs) {
dev_dbg(&data->master->dev, "%s:"
"delay in usec=%d\n", __func__,
data->cur_trans->delay_usecs);
udelay(data->cur_trans->delay_usecs);
}
spin_lock(&data->lock);
/* No more transfer in this message. */
if ((data->cur_trans->transfer_list.next) ==
&(data->current_msg->transfers)) {
pch_spi_nomore_transfer(data, pmsg);
}
spin_unlock(&data->lock);
} while (data->cur_trans != NULL);
}
static void pch_spi_free_resources(struct pch_spi_board_data *board_dat)
{
dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__);
/* free workqueue */
if (board_dat->data->wk != NULL) {
destroy_workqueue(board_dat->data->wk);
board_dat->data->wk = NULL;
dev_dbg(&board_dat->pdev->dev,
"%s destroy_workqueue invoked successfully\n",
__func__);
}
/* disable interrupts & free IRQ */
if (board_dat->irq_reg_sts) {
/* disable interrupts */
pch_spi_setclr_reg(board_dat->data->master, PCH_SPCR,
0, PCH_ALL);
dev_dbg(&board_dat->pdev->dev,
"%s free_irq invoked successfully\n",
__func__);
board_dat->irq_reg_sts = false;
}
}
static int pch_spi_get_resources(struct pch_spi_board_data *board_dat)
{
int retval = 0;
dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__);
/* create workqueue */
board_dat->data->wk = create_singlethread_workqueue(KBUILD_MODNAME);
if (!board_dat->data->wk) {
dev_err(&board_dat->pdev->dev,
"%s create_singlet hread_workqueue failed\n", __func__);
retval = -EBUSY;
goto err_return;
}
board_dat->pci_req_sts = true;
/* reset PCH SPI h/w */
pch_spi_reset(board_dat->data->master);
dev_dbg(&board_dat->pdev->dev,
"%s pch_spi_reset invoked successfully\n", __func__);
board_dat->irq_reg_sts = true;
dev_dbg(&board_dat->pdev->dev, "%s data->irq_reg_sts=true\n", __func__);
err_return:
if (retval != 0) {
dev_err(&board_dat->pdev->dev,
"%s FAIL:invoking pch_spi_free_resources\n", __func__);
pch_spi_free_resources(board_dat);
}
dev_dbg(&board_dat->pdev->dev, "%s Return=%d\n", __func__, retval);
return retval;
}
static void pch_spi_release_slot(struct device *dev)
{
struct pch_spi_board_data *board_dat = dev_get_platdata(dev);
if (board_dat)
platform_device_unregister(board_dat->data->plat_dev);
}
static int __devinit pch_spi_pd_probe(struct platform_device *plat_dev)
{
int ret;
struct spi_master *master;
struct pch_spi_board_data *board_dat = dev_get_platdata(&plat_dev->dev);
master = spi_alloc_master(&board_dat->pdev->dev,
sizeof(struct pch_spi_data));
if (!master) {
dev_err(&plat_dev->dev, "spi_alloc_master[%d] failed.\n",
plat_dev->id);
return -ENOMEM;
}
board_dat->data = spi_master_get_devdata(master);
board_dat->data->master = master;
/* baseaddress + 0x20(offset) */
board_dat->data->io_remap_addr = pci_iomap(board_dat->pdev, 1, 0) +
0x20 * plat_dev->id;
if (!board_dat->data->io_remap_addr) {
dev_err(&plat_dev->dev, "%s pci_iomap failed\n", __func__);
ret = -ENOMEM;
goto err_pci_iomap;
}
dev_dbg(&plat_dev->dev, "[ch%d] remap_addr=%p \n",
plat_dev->id, board_dat->data->io_remap_addr);
/* initialize members of SPI master */
master->bus_num = plat_dev->id;
master->num_chipselect = PCH_MAX_CS;
master->setup = pch_spi_setup;
master->transfer = pch_spi_transfer;
board_dat->data->plat_dev = plat_dev;
board_dat->data->n_curnt_chip = 255;
board_dat->data->status = STATUS_RUNNING;
board_dat->data->board_dat = board_dat;
board_dat->data->ch = plat_dev->id;
INIT_LIST_HEAD(&board_dat->data->queue);
spin_lock_init(&board_dat->data->lock);
INIT_WORK(&board_dat->data->work, pch_spi_process_messages);
init_waitqueue_head(&board_dat->data->wait);
ret = pch_spi_get_resources(board_dat);
if (ret) {
dev_err(&plat_dev->dev, "%s fail(retval=%d)\n", __func__, ret);
goto err_spi_get_resources;
}
ret = request_irq(board_dat->pdev->irq, pch_spi_handler,
IRQF_SHARED, KBUILD_MODNAME, board_dat);
if (ret) {
dev_err(&plat_dev->dev,
"%s request_irq failed\n", __func__);
goto err_request_irq;
}
pch_spi_set_master_mode(master);
ret = spi_register_master(master);
if (ret != 0) {
dev_err(&plat_dev->dev,
"%s spi_register_master FAILED\n", __func__);
goto err_spi_register_master;
}
return 0;
err_spi_register_master:
free_irq(board_dat->pdev->irq, board_dat);
err_request_irq:
pch_spi_free_resources(board_dat);
err_spi_get_resources:
pci_iounmap(board_dat->pdev, board_dat->data->io_remap_addr);
err_pci_iomap:
spi_master_put(master);
return ret;
}
static int pch_spi_pd_remove(struct platform_device *plat_dev)
{
struct pch_spi_board_data *board_dat = dev_get_platdata(&plat_dev->dev);
dev_dbg(&plat_dev->dev, "%s:[ch%d] irq=%d \n",
__func__, plat_dev->id, board_dat->pdev->irq);
free_irq(board_dat->pdev->irq, board_dat);
pch_spi_free_resources(board_dat);
spi_unregister_master(board_dat->data->master);
pci_iounmap(board_dat->pdev, board_dat->data->io_remap_addr);
spi_master_put(board_dat->data->master);
platform_set_drvdata(plat_dev, NULL);
return 0;
}
static struct platform_driver pch_spi_pd_driver = {
.driver = {
.name = "pch-spi",
.owner = THIS_MODULE,
},
.probe = pch_spi_pd_probe,
.remove = __devexit_p(pch_spi_pd_remove)
};
static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct pch_spi_board_data board_dat;
struct platform_device *pd_dev = NULL;
int retval;
int i;
retval = pci_request_regions(pdev, KBUILD_MODNAME);
if (retval) {
dev_err(&pdev->dev, "%s request_region failed\n", __func__);
return retval;
}
memset(&board_dat, 0, sizeof(board_dat));
board_dat.pdev = pdev;
board_dat.num = id->driver_data;
retval = pci_enable_device(pdev);
if (retval) {
dev_err(&pdev->dev, "%s pci_enable_device FAILED\n", __func__);
goto pci_enable_device;
}
for (i = 0; i < board_dat.num; i++) {
pd_dev = platform_device_alloc("pch-spi", i);
if (!pd_dev) {
dev_err(&pdev->dev, "platform_device_alloc failed\n");
goto err_platform_device;
}
pd_dev->dev.parent = &pdev->dev;
pd_dev->dev.release = pch_spi_release_slot;
retval = platform_device_add_data(pd_dev, &board_dat,
sizeof(board_dat));
if (retval) {
dev_err(&pdev->dev,
"platform_device_add_data failed\n");
platform_device_put(pd_dev);
goto err_platform_device;
}
retval = platform_device_add(pd_dev);
if (retval) {
dev_err(&pdev->dev, "platform_device_add failed\n");
platform_device_put(pd_dev);
goto err_platform_device;
}
}
pci_set_drvdata(pdev, pd_dev);
return 0;
err_platform_device:
pci_disable_device(pdev);
pci_enable_device:
pci_release_regions(pdev);
return retval;
}
static void pch_spi_remove(struct pci_dev *pdev)
{
dev_dbg(&pdev->dev, "%s ENTRY:pdev=%p\n", __func__, pdev);
pci_disable_device(pdev);
pci_release_regions(pdev);
}
#ifdef CONFIG_PM
static int pch_spi_suspend(struct pci_dev *pdev, pm_message_t state)
{
// u8 count;
int retval;
struct pch_spi_board_data *board_dat = pci_get_drvdata(pdev);
dev_dbg(&pdev->dev, "%s ENTRY\n", __func__);
if (!board_dat) {
dev_err(&pdev->dev,
"%s pci_get_drvdata returned NULL\n", __func__);
return -EFAULT;
}
retval = 0;
board_dat->suspend_sts = true;
#if 0
/* check if the current message is processed:
Only after thats done the transfer will be suspended */
for (i = 0; i < board_dat->num; i++) {
count = 255;
while ((--count) > 0) {
if (!(board_dat->data[i]->bcurrent_msg_processing)) {
dev_dbg(&pdev->dev, "%s board_dat->data->bCurre"
"nt_msg_processing=false\n", __func__);
break;
} else {
dev_dbg(&pdev->dev, "%s board_dat->data->bCurre"
"nt_msg_processing=true\n", __func__);
}
msleep(PCH_SLEEP_TIME);
}
}
/* Free IRQ */
if (board_dat->irq_reg_sts) {
/* disable all interrupts */
for (i = 0; i < board_dat->num; i++) {
pch_spi_setclr_reg(board_dat->data[i]->master, PCH_SPCR,
0, PCH_ALL);
pch_spi_reset(board_dat->data[i]->master);
}
free_irq(board_dat->pdev->irq, board_dat);
board_dat->irq_reg_sts = false;
dev_dbg(&pdev->dev,
"%s free_irq invoked successfully.\n", __func__);
}
#endif
/* save config space */
retval = pci_save_state(pdev);
if (retval == 0) {
dev_dbg(&pdev->dev, "%s pci_save_state returned=%d\n",
__func__, retval);
/* disable PM notifications */
pci_enable_wake(pdev, PCI_D3hot, 0);
dev_dbg(&pdev->dev,
"%s pci_enable_wake invoked successfully\n", __func__);
/* disable PCI device */
pci_disable_device(pdev);
dev_dbg(&pdev->dev,
"%s pci_disable_device invoked successfully\n",
__func__);
/* move device to D3hot state */
pci_set_power_state(pdev, PCI_D3hot);
dev_dbg(&pdev->dev,
"%s pci_set_power_state invoked successfully\n",
__func__);
} else {
dev_err(&pdev->dev, "%s pci_save_state failed\n", __func__);
}
dev_dbg(&pdev->dev, "%s return=%d\n", __func__, retval);
return retval;
}
static int pch_spi_resume(struct pci_dev *pdev)
{
int retval;
int i;
struct pch_spi_board_data *board = pci_get_drvdata(pdev);
dev_dbg(&pdev->dev, "%s ENTRY\n", __func__);
if (!board) {
dev_err(&pdev->dev,
"%s pci_get_drvdata returned NULL\n", __func__);
return -EFAULT;
}
/* move device to DO power state */
pci_set_power_state(pdev, PCI_D0);
/* restore state */
pci_restore_state(pdev);
retval = pci_enable_device(pdev);
if (retval < 0) {
dev_err(&pdev->dev,
"%s pci_enable_device failed\n", __func__);
} else {
/* disable PM notifications */
pci_enable_wake(pdev, PCI_D3hot, 0);
/* register IRQ handler */
if (!board->irq_reg_sts) {
/* register IRQ */
retval = request_irq(board->pdev->irq, pch_spi_handler,
IRQF_SHARED, KBUILD_MODNAME,
board);
if (retval < 0) {
dev_err(&pdev->dev,
"%s request_irq failed\n", __func__);
return retval;
}
board->irq_reg_sts = true;
/* reset PCH SPI h/w */
for (i = 0; i < board->num; i++) {
// pch_spi_reset(board->data[i]->master);
// pch_spi_set_master_mode(board->data[i]->master);
}
/* set suspend status to false */
board->suspend_sts = false;
}
}
dev_dbg(&pdev->dev, "%s returning=%d\n", __func__, retval);
return retval;
}
#else
#define pch_spi_suspend NULL
#define pch_spi_resume NULL
#endif
static struct pci_driver pch_spi_pcidev = {
.name = "pch_spi",
.id_table = pch_spi_pcidev_id,
.probe = pch_spi_probe,
.remove = pch_spi_remove,
.suspend = pch_spi_suspend,
.resume = pch_spi_resume,
};
static int __init pch_spi_init(void)
{
platform_driver_register(&pch_spi_pd_driver);
return pci_register_driver(&pch_spi_pcidev);
}
module_init(pch_spi_init);
static void __exit pch_spi_exit(void)
{
platform_driver_unregister(&pch_spi_pd_driver);
pci_unregister_driver(&pch_spi_pcidev);
}
module_exit(pch_spi_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Topcliff PCH SPI PCI Driver");
------------------------------------------------------------------------------
Index, Search & Analyze Logs and other IT data in Real-Time with Splunk
Collect, index and harness all the fast moving IT data generated by your
applications, servers and devices whether physical, virtual or in the cloud.
Deliver compliance at lower cost and gain new business insights.
Free Software Download: http://p.sf.net/sfu/splunk-dev2dev
_______________________________________________
spi-devel-general mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/spi-devel-general
