This bus driver supports the QUP SPI hardware controller in the Qualcomm
MSM SOCs. The Qualcomm Universal Peripheral Engine (QUP) is a general
purpose data path engine with input/output FIFOs and an embedded SPI
mini-core. The driver currently supports only FIFO mode.
Signed-off-by: Harini Jayaraman <hari...@codeaurora.org>
---
drivers/spi/Kconfig | 10 +
drivers/spi/Makefile | 1 +
drivers/spi/msm_spi_qsd.h | 436 +++++++++++++
drivers/spi/spi-qsd.c | 1144 +++++++++++++++++++++++++++++++++
include/linux/platform_data/msm_spi.h | 19 +
5 files changed, 1610 insertions(+), 0 deletions(-)
create mode 100644 drivers/spi/msm_spi_qsd.h
create mode 100644 drivers/spi/spi-qsd.c
create mode 100644 include/linux/platform_data/msm_spi.h
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 52e2900..af55a0a 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -280,6 +280,16 @@ config SPI_PXA2XX
config SPI_PXA2XX_PCI
def_bool SPI_PXA2XX && X86_32 && PCI
+config SPI_QUP
+ tristate "Qualcomm MSM SPI QUPe Support"
+ depends on ARCH_MSM
+ help
+ Support for Serial Peripheral Interface for Qualcomm Universal
+ Peripheral.
+
+ This driver can also be built as a module. If so, the module
+ will be called spi-qsd.
+
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
depends on ARCH_S3C2410 && EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 61c3261..f426c89 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_SPI_PL022) += spi-pl022.o
obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
+obj-$(CONFIG_SPI_QUP) += spi-qsd.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o
spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
diff --git a/drivers/spi/msm_spi_qsd.h b/drivers/spi/msm_spi_qsd.h
new file mode 100644
index 0000000..d141d08
--- /dev/null
+++ b/drivers/spi/msm_spi_qsd.h
@@ -0,0 +1,436 @@
+/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MSM_SPI_QSD_H
+#define _MSM_SPI_QSD_H
+
+#define SPI_DRV_NAME "spi_qsd"
+
+#define QUP_CONFIG 0x0000 /* N & NO_INPUT/NO_OUPUT bits */
+#define QUP_ERROR_FLAGS 0x0308
+#define QUP_ERROR_FLAGS_EN 0x030C
+#define QUP_ERR_MASK 0x3
+#define SPI_OUTPUT_FIFO_WORD_CNT 0x010C
+#define SPI_INPUT_FIFO_WORD_CNT 0x0214
+#define QUP_MX_WRITE_COUNT 0x0150
+#define QUP_MX_WRITE_CNT_CURRENT 0x0154
+
+#define QUP_CONFIG_SPI_MODE 0x0100
+
+#define GSBI_CTRL_REG 0x0
+#define GSBI_SPI_CONFIG 0x30
+
+#define SPI_CONFIG 0x0300
+#define SPI_IO_CONTROL 0x0304
+#define SPI_IO_MODES 0x0008
+#define SPI_SW_RESET 0x000C
+#define SPI_TIME_OUT 0x0010
+#define SPI_TIME_OUT_CURRENT 0x0014
+#define SPI_MX_OUTPUT_COUNT 0x0100
+#define SPI_MX_OUTPUT_CNT_CURRENT 0x0104
+#define SPI_MX_INPUT_COUNT 0x0200
+#define SPI_MX_INPUT_CNT_CURRENT 0x0204
+#define SPI_MX_READ_COUNT 0x0208
+#define SPI_MX_READ_CNT_CURRENT 0x020C
+#define SPI_OPERATIONAL 0x0018
+#define SPI_ERROR_FLAGS 0x001C
+#define SPI_ERROR_FLAGS_EN 0x0020
+#define SPI_DEASSERT_WAIT 0x0310
+#define SPI_OUTPUT_DEBUG 0x0108
+#define SPI_INPUT_DEBUG 0x0210
+#define SPI_TEST_CTRL 0x0024
+#define SPI_OUTPUT_FIFO 0x0110
+#define SPI_INPUT_FIFO 0x0218
+#define SPI_STATE 0x0004
+
+/* SPI_CONFIG fields */
+#define SPI_CFG_INPUT_FIRST 0x00000200
+#define SPI_NO_INPUT 0x00000080
+#define SPI_NO_OUTPUT 0x00000040
+#define SPI_CFG_LOOPBACK 0x00000100
+#define SPI_CFG_N 0x0000001F
+
+/* SPI_IO_CONTROL fields */
+#define SPI_IO_C_CLK_IDLE_HIGH 0x00000400
+#define SPI_IO_C_MX_CS_MODE 0x00000100
+#define SPI_IO_C_CS_N_POLARITY 0x000000F0
+#define SPI_IO_C_CS_N_POLARITY_0 0x00000010
+#define SPI_IO_C_CS_SELECT 0x0000000C
+#define SPI_IO_C_TRISTATE_CS 0x00000002
+#define SPI_IO_C_NO_TRI_STATE 0x00000001
+
+/* SPI_IO_MODES fields */
+#define SPI_IO_M_PACK_EN 0x00008000
+#define SPI_IO_M_UNPACK_EN 0x00004000
+#define SPI_IO_M_INPUT_MODE 0x00003000
+#define SPI_IO_M_OUTPUT_MODE 0x00000C00
+#define SPI_IO_M_INPUT_FIFO_SIZE 0x00000380
+#define SPI_IO_M_INPUT_BLOCK_SIZE 0x00000060
+#define SPI_IO_M_OUTPUT_FIFO_SIZE 0x0000001C
+#define SPI_IO_M_OUTPUT_BLOCK_SIZE 0x00000003
+
+#define INPUT_BLOCK_SZ_SHIFT 5
+#define INPUT_FIFO_SZ_SHIFT 7
+#define OUTPUT_BLOCK_SZ_SHIFT 0
+#define OUTPUT_FIFO_SZ_SHIFT 2
+#define OUTPUT_MODE_SHIFT 10
+#define INPUT_MODE_SHIFT 12
+
+/* SPI_OPERATIONAL fields */
+#define SPI_OP_MAX_INPUT_DONE_FLAG 0x00000800
+#define SPI_OP_MAX_OUTPUT_DONE_FLAG 0x00000400
+#define SPI_OP_INPUT_SERVICE_FLAG 0x00000200
+#define SPI_OP_OUTPUT_SERVICE_FLAG 0x00000100
+#define SPI_OP_INPUT_FIFO_FULL 0x00000080
+#define SPI_OP_OUTPUT_FIFO_FULL 0x00000040
+#define SPI_OP_IP_FIFO_NOT_EMPTY 0x00000020
+#define SPI_OP_OP_FIFO_NOT_EMPTY 0x00000010
+#define SPI_OP_STATE_VALID 0x00000004
+#define SPI_OP_STATE 0x00000003
+#define SPI_OP_STATE_CLEAR_BITS 0x2
+
+/* SPI_ERROR_FLAGS fields */
+#define SPI_ERR_OUTPUT_OVER_RUN_ERR 0x00000020
+#define SPI_ERR_INPUT_UNDER_RUN_ERR 0x00000010
+#define SPI_ERR_OUTPUT_UNDER_RUN_ERR 0x00000008
+#define SPI_ERR_INPUT_OVER_RUN_ERR 0x00000004
+#define SPI_ERR_CLK_OVER_RUN_ERR 0x00000002
+#define SPI_ERR_CLK_UNDER_RUN_ERR 0x00000001
+
+#define SPI_NUM_CHIPSELECTS 4
+#define SPI_SUPPORTED_MODES (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP)
+
+#define SPI_DELAY_THRESHOLD 1
+/* Default timeout is 10 milliseconds */
+#define SPI_DEFAULT_TIMEOUT 10
+
+enum msm_spi_state {
+ SPI_OP_STATE_RESET = 0x00000000,
+ SPI_OP_STATE_RUN = 0x00000001,
+ SPI_OP_STATE_PAUSE = 0x00000003,
+};
+
+enum msm_spi_mode {
+ SPI_FIFO_MODE = 0x0, /* 00 */
+ SPI_BLOCK_MODE = 0x1, /* 01 */
+ SPI_DMOV_MODE = 0x2, /* 10 */
+ SPI_MODE_NONE = 0xFF, /* invalid value */
+};
+
+#ifdef CONFIG_DEBUG_FS
+static const struct {
+ const char *name;
+ mode_t mode;
+ int offset;
+} debugfs_spi_regs[] = {
+ {"config", S_IRUGO | S_IWUSR, SPI_CONFIG},
+ {"io_control", S_IRUGO | S_IWUSR, SPI_IO_CONTROL},
+ {"io_modes", S_IRUGO | S_IWUSR, SPI_IO_MODES},
+ {"sw_reset", S_IWUSR, SPI_SW_RESET},
+ {"time_out", S_IRUGO | S_IWUSR, SPI_TIME_OUT},
+ {"time_out_current", S_IRUGO, SPI_TIME_OUT_CURRENT},
+ {"mx_output_count", S_IRUGO | S_IWUSR, SPI_MX_OUTPUT_COUNT},
+ {"mx_output_cnt_current", S_IRUGO, SPI_MX_OUTPUT_CNT_CURRENT},
+ {"mx_input_count", S_IRUGO | S_IWUSR, SPI_MX_INPUT_COUNT},
+ {"mx_input_cnt_current", S_IRUGO, SPI_MX_INPUT_CNT_CURRENT},
+ {"mx_read_count", S_IRUGO | S_IWUSR, SPI_MX_READ_COUNT},
+ {"mx_read_cnt_current", S_IRUGO, SPI_MX_READ_CNT_CURRENT},
+ {"operational", S_IRUGO | S_IWUSR, SPI_OPERATIONAL},
+ {"error_flags", S_IRUGO | S_IWUSR, SPI_ERROR_FLAGS},
+ {"error_flags_en", S_IRUGO | S_IWUSR, SPI_ERROR_FLAGS_EN},
+ {"deassert_wait", S_IRUGO | S_IWUSR, SPI_DEASSERT_WAIT},
+ {"output_debug", S_IRUGO, SPI_OUTPUT_DEBUG},
+ {"input_debug", S_IRUGO, SPI_INPUT_DEBUG},
+ {"test_ctrl", S_IRUGO | S_IWUSR, SPI_TEST_CTRL},
+ {"output_fifo", S_IWUSR, SPI_OUTPUT_FIFO},
+ {"input_fifo" , S_IRUSR, SPI_INPUT_FIFO},
+ {"spi_state", S_IRUGO | S_IWUSR, SPI_STATE},
+ {"qup_config", S_IRUGO | S_IWUSR, QUP_CONFIG},
+ {"qup_error_flags", S_IRUGO | S_IWUSR, QUP_ERROR_FLAGS},
+ {"qup_error_flags_en", S_IRUGO | S_IWUSR, QUP_ERROR_FLAGS_EN},
+ {"mx_write_cnt", S_IRUGO | S_IWUSR, QUP_MX_WRITE_COUNT},
+ {"mx_write_cnt_current", S_IRUGO, QUP_MX_WRITE_CNT_CURRENT},
+ {"output_fifo_word_cnt", S_IRUGO, SPI_OUTPUT_FIFO_WORD_CNT},
+ {"input_fifo_word_cnt", S_IRUGO, SPI_INPUT_FIFO_WORD_CNT},
+};
+#endif
+
+/**
+ * struct msm_spi
+ * @read_buf: rx_buf from the spi_transfer.
+ * @write_buf: tx_buf from the spi_transfer.
+ * @base: location of QUP controller I/O area in memory.
+ * @dev: parent platform device.
+ * @queue_lock: lock to protect queue.
+ * @core_lock: mutex used to protect this struct.
+ * @queue: to log SPI transfer requests.
+ * @workqueue: workqueue for the SPI transfer requests.
+ * @work_data: work.
+ * @cur_msg: the current spi_message being processed.
+ * @cur_transfer: the current spi_transfer being processed.
+ * @transfer_complete: completion function to signal the end of a spi_transfer.
+ * @clk: the SPI core clock
+ * @pclk: hardware core clock. Needs to be enabled to access the QUP register
+ * @mem_phys_addr: physical address of the QUP controller.
+ * @mem_size: size of the QUP controller block.
+ * @input_fifo_size: the input FIFO size (in bytes).
+ * @output_fifo_size: the output FIFO size (in bytes).
+ * @rx_bytes_remaining: the number of rx bytes remaining to be transferred.
+ * @tx_bytes_remaining: the number of tx bytes remaining to be transferred.
+ * @clock_speed: SPI clock speed.
+ * @irq_in: assigned interrupt line for QUP interrupts.
+ * @read_xfr_cnt: number of words read from the FIFO (per transfer).
+ * @write_xfr_cnt: number of words written to the FIFO (per transfer).
+ * @write_len: the total number of tx bytes to be transferred, per
+ * spi_message. This is valid only for WR-WR and WR-RD transfers
+ * in a single spi_message.
+ * @read_len: the total number of rx bytes to be transferred, per
+ * spi_message. This is valid only for WR-WR and WR-RD transfers
+ * in a single spi_message.
+ * @bytes_per_word: bytes per word
+ * @suspended: the suspend state.
+ * @transfer_pending: when set indicates a pending transfer.
+ * @continue_suspend: head of wait queue.
+ * @mode: mode for SPI operation.
+ * @input_block_size: the input block size (in bytes).
+ * @output_block_size: the output block size (in bytes).
+ * @stat_rx: count of input interrupts handled.
+ * @stat_tx: count of output interrupts handled.
+ * @dent_spi: used for debug purposes.
+ * @debugfs_spi_regs: used for debug purposes.
+ * @pdata: platform data
+ * @multi_xfr: when set indicates multiple spi_transfers in a single
+ * spi_message.
+ * @done: flag used to signal completion.
+ * @cur_msg_len: combined length of all the transfers in a single
+ * spi_message (in bytes).
+ * @cur_tx_transfer: the current tx transfer being processed. Used in
+ * FIFO mode only.
+ * @cur_rx_transfer: the current rx transfer being processed. Used in
+ * FIFO mode only.
+ *
+ * Early QUP controller used three separate interrupt lines for input, output,
+ * and error interrupts. Later versions share a single interrupt line.
+ */
+struct msm_spi {
+ u8 *read_buf;
+ const u8 *write_buf;
+ void __iomem *base;
+ struct device *dev;
+ spinlock_t queue_lock;
+ struct mutex core_lock;
+ struct list_head queue;
+ struct workqueue_struct *workqueue;
+ struct work_struct work_data;
+ struct spi_message *cur_msg;
+ struct spi_transfer *cur_transfer;
+ struct completion transfer_complete;
+ struct clk *clk;
+ struct clk *pclk;
+ unsigned long mem_phys_addr;
+ size_t mem_size;
+ int input_fifo_size;
+ int output_fifo_size;
+ u32 rx_bytes_remaining;
+ u32 tx_bytes_remaining;
+ u32 clock_speed;
+ int irq_in;
+ int read_xfr_cnt;
+ int write_xfr_cnt;
+ int write_len;
+ int read_len;
+ int bytes_per_word;
+ bool suspended;
+ bool transfer_pending;
+ wait_queue_head_t continue_suspend;
+ enum msm_spi_mode mode;
+ int input_block_size;
+ int output_block_size;
+ int stat_rx;
+ int stat_tx;
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *dent_spi;
+ struct dentry *debugfs_spi_regs[ARRAY_SIZE(debugfs_spi_regs)];
+#endif
+ struct msm_spi_platform_data *pdata;
+ bool multi_xfr;
+ bool done;
+ u32 cur_msg_len;
+ struct spi_transfer *cur_tx_transfer;
+ struct spi_transfer *cur_rx_transfer;
+};
+
+/* Forward declaration */
+static irqreturn_t msm_spi_input_irq(int irq, void *dev_id);
+static irqreturn_t msm_spi_output_irq(int irq, void *dev_id);
+static irqreturn_t msm_spi_error_irq(int irq, void *dev_id);
+static inline int msm_spi_set_state(struct msm_spi *dd,
+ enum msm_spi_state state);
+static void msm_spi_write_word_to_fifo(struct msm_spi *dd);
+static inline void msm_spi_write_rmn_to_fifo(struct msm_spi *dd);
+
+/* In QUP the same interrupt line is used for input, output and error */
+static inline int msm_spi_get_irq_data(struct msm_spi *dd,
+ struct platform_device *pdev)
+{
+ dd->irq_in = platform_get_irq_byname(pdev, "spi_irq_in");
+ if (dd->irq_in < 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static inline int msm_spi_configure_gsbi(struct msm_spi *dd,
+ struct platform_device *pdev)
+{
+ struct resource *resource;
+ unsigned long gsbi_mem_phys_addr;
+ size_t gsbi_mem_size;
+ void __iomem *gsbi_base;
+
+ resource = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM, "gsbi_base");
+ if (!resource)
+ return -ENXIO;
+
+ gsbi_mem_phys_addr = resource->start;
+ gsbi_mem_size = resource_size(resource);
+ if (!devm_request_mem_region(&pdev->dev, gsbi_mem_phys_addr,
+ gsbi_mem_size, SPI_DRV_NAME))
+ return -ENXIO;
+
+ gsbi_base = devm_ioremap(&pdev->dev, gsbi_mem_phys_addr,
+ gsbi_mem_size);
+ if (!gsbi_base)
+ return -ENXIO;
+
+ /* Set GSBI to SPI mode */
+ writel(GSBI_SPI_CONFIG, gsbi_base + GSBI_CTRL_REG);
+
+ return 0;
+}
+
+/* Figure which irq occured and call the relevant functions */
+static irqreturn_t msm_spi_qup_irq(int irq, void *dev_id)
+{
+ u32 op, ret = IRQ_NONE;
+ struct msm_spi *dd = dev_id;
+
+ if (readl(dd->base + SPI_ERROR_FLAGS) ||
+ readl(dd->base + QUP_ERROR_FLAGS)) {
+ struct spi_master *master = dev_get_drvdata(dd->dev);
+ ret |= msm_spi_error_irq(irq, master);
+ }
+
+ op = readl(dd->base + SPI_OPERATIONAL);
+ if (op & SPI_OP_INPUT_SERVICE_FLAG) {
+ writel(SPI_OP_INPUT_SERVICE_FLAG, dd->base + SPI_OPERATIONAL);
+ ret |= msm_spi_input_irq(irq, dev_id);
+ }
+
+ if (op & SPI_OP_OUTPUT_SERVICE_FLAG) {
+ writel(SPI_OP_OUTPUT_SERVICE_FLAG, dd->base + SPI_OPERATIONAL);
+ ret |= msm_spi_output_irq(irq, dev_id);
+ }
+
+ if (dd->done) {
+ complete(&dd->transfer_complete);
+ dd->done = 0;
+ }
+ return ret;
+}
+
+static inline int msm_spi_request_irq(struct msm_spi *dd,
+ const char *name,
+ struct spi_master *master)
+{
+ return request_irq(dd->irq_in, msm_spi_qup_irq, IRQF_TRIGGER_HIGH,
+ name, dd);
+}
+
+static inline void msm_spi_free_irq(struct msm_spi *dd,
+ struct spi_master *master)
+{
+ free_irq(dd->irq_in, dd);
+}
+
+static inline void msm_spi_disable_irqs(struct msm_spi *dd)
+{
+ disable_irq(dd->irq_in);
+}
+
+static inline void msm_spi_enable_irqs(struct msm_spi *dd)
+{
+ enable_irq(dd->irq_in);
+}
+
+static inline void msm_spi_get_clk_err(struct msm_spi *dd, u32 *spi_err)
+{
+ *spi_err = readl(dd->base + QUP_ERROR_FLAGS);
+}
+
+static inline void msm_spi_ack_clk_err(struct msm_spi *dd)
+{
+ writel(QUP_ERR_MASK, dd->base + QUP_ERROR_FLAGS);
+}
+
+static inline void msm_spi_add_configs(struct msm_spi *dd, u32 *config, int n);
+
+/* QUP has no_input, no_output, and N bits at QUP_CONFIG */
+static inline void msm_spi_set_qup_config(struct msm_spi *dd, int bpw)
+{
+ u32 qup_config = readl(dd->base + QUP_CONFIG);
+
+ msm_spi_add_configs(dd, &qup_config, bpw-1);
+ writel(qup_config | QUP_CONFIG_SPI_MODE, dd->base + QUP_CONFIG);
+}
+
+static inline int msm_spi_prepare_for_write(struct msm_spi *dd)
+{
+ if (msm_spi_set_state(dd, SPI_OP_STATE_RUN))
+ return -EINVAL;
+
+ if (msm_spi_set_state(dd, SPI_OP_STATE_PAUSE))
+ return -EINVAL;
+
+ return 0;
+}
+
+static inline void msm_spi_start_write(struct msm_spi *dd, u32 read_count)
+{
+ if (read_count <= dd->input_fifo_size)
+ msm_spi_write_rmn_to_fifo(dd);
+ else
+ msm_spi_write_word_to_fifo(dd);
+}
+
+static inline void msm_spi_set_write_count(struct msm_spi *dd, int val)
+{
+ writel(val, dd->base + QUP_MX_WRITE_COUNT);
+}
+
+static inline void msm_spi_complete(struct msm_spi *dd)
+{
+ dd->done = 1;
+}
+
+static inline void msm_spi_enable_error_flags(struct msm_spi *dd)
+{
+ writel_relaxed(0x00000078, dd->base + SPI_ERROR_FLAGS_EN);
+}
+
+static inline void msm_spi_clear_error_flags(struct msm_spi *dd)
+{
+ writel_relaxed(0x0000007C, dd->base + SPI_ERROR_FLAGS);
+}
+
+#endif
diff --git a/drivers/spi/spi-qsd.c b/drivers/spi/spi-qsd.c
new file mode 100644
index 0000000..d949020
--- /dev/null
+++ b/drivers/spi/spi-qsd.c
@@ -0,0 +1,1144 @@
+/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+#include <linux/sched.h>
+#include <linux/mutex.h>
+#include <linux/platform_data/msm_spi.h>
+#include "msm_spi_qsd.h"
+
+static void msm_spi_clock_set(struct msm_spi *dd, int speed)
+{
+ int rc;
+
+ rc = clk_set_rate(dd->clk, speed);
+ if (!rc)
+ dd->clock_speed = speed;
+}
+
+static int msm_spi_calculate_size(int *fifo_size,
+ int *block_size,
+ int block,
+ int mult)
+{
+ int words;
+
+ switch (block) {
+ case 0:
+ words = 1; /* 4 bytes */
+ break;
+ case 1:
+ words = 4; /* 16 bytes */
+ break;
+ case 2:
+ words = 8; /* 32 bytes */
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (mult) {
+ case 0:
+ *fifo_size = words * 2;
+ break;
+ case 1:
+ *fifo_size = words * 4;
+ break;
+ case 2:
+ *fifo_size = words * 8;
+ break;
+ case 3:
+ *fifo_size = words * 16;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ *block_size = words * sizeof(u32); /* in bytes */
+ return 0;
+}
+
+static void __init msm_spi_calculate_fifo_size(struct msm_spi *dd)
+{
+ u32 spi_iom;
+ int block;
+ int mult;
+
+ spi_iom = readl(dd->base + SPI_IO_MODES);
+ block = (spi_iom & SPI_IO_M_INPUT_BLOCK_SIZE) >> INPUT_BLOCK_SZ_SHIFT;
+ mult = (spi_iom & SPI_IO_M_INPUT_FIFO_SIZE) >> INPUT_FIFO_SZ_SHIFT;
+ if (msm_spi_calculate_size(&dd->input_fifo_size, &dd->input_block_size,
+ block, mult)) {
+ goto fifo_size_err;
+ }
+
+ block = (spi_iom & SPI_IO_M_OUTPUT_BLOCK_SIZE) >> OUTPUT_BLOCK_SZ_SHIFT;
+ mult = (spi_iom & SPI_IO_M_OUTPUT_FIFO_SIZE) >> OUTPUT_FIFO_SZ_SHIFT;
+ if (msm_spi_calculate_size(&dd->output_fifo_size,
+ &dd->output_block_size, block, mult)) {
+ goto fifo_size_err;
+ }
+
+ return;
+
+fifo_size_err:
+ pr_err("%s: Invalid FIFO size,SPI_IO_MODES=0x%x\n", __func__, spi_iom);
+ return;
+}
+
+static void msm_spi_read_word_from_fifo(struct msm_spi *dd)
+{
+ u32 data_in;
+ int i;
+ int shift;
+
+ data_in = readl(dd->base + SPI_INPUT_FIFO);
+
+ if (dd->read_buf) {
+ for (i = 0; (i < dd->bytes_per_word) &&
+ dd->rx_bytes_remaining; i++) {
+ /*
+ * The data format depends on bytes_per_word:
+ * 4 bytes: 0x12345678
+ * 3 bytes: 0x00123456
+ * 2 bytes: 0x00001234
+ * 1 byte : 0x00000012
+ */
+ shift = 8 * (dd->bytes_per_word - i - 1);
+ *dd->read_buf++ = (data_in & (0xFF << shift)) >> shift;
+ dd->rx_bytes_remaining--;
+ }
+ } else {
+ if (dd->rx_bytes_remaining >= dd->bytes_per_word)
+ dd->rx_bytes_remaining -= dd->bytes_per_word;
+ else
+ dd->rx_bytes_remaining = 0;
+ }
+
+ dd->read_xfr_cnt++;
+ if (dd->multi_xfr) {
+ if (!dd->rx_bytes_remaining)
+ dd->read_xfr_cnt = 0;
+ else if ((dd->read_xfr_cnt * dd->bytes_per_word) ==
+ dd->read_len) {
+ struct spi_transfer *t = dd->cur_rx_transfer;
+ if (t->transfer_list.next != &dd->cur_msg->transfers) {
+ t = list_entry(t->transfer_list.next,
+ struct spi_transfer,
+ transfer_list);
+ dd->read_buf = t->rx_buf;
+ dd->read_len = t->len;
+ dd->read_xfr_cnt = 0;
+ dd->cur_rx_transfer = t;
+ }
+ }
+ }
+}
+
+static inline bool msm_spi_is_valid_state(struct msm_spi *dd)
+{
+ u32 spi_op = readl(dd->base + SPI_STATE);
+
+ return spi_op & SPI_OP_STATE_VALID;
+}
+
+static inline int msm_spi_wait_valid(struct msm_spi *dd)
+{
+ unsigned long delay;
+ unsigned long timeout;
+
+ if (dd->clock_speed == 0)
+ return -EINVAL;
+
+ /*
+ * Based on the SPI clock speed, sufficient time
+ * should be given for the SPI state transition to occur
+ */
+ delay = (10 * USEC_PER_SEC) / dd->clock_speed;
+ /* For small delay values, the default timeout would be one jiffy */
+ if (delay < SPI_DELAY_THRESHOLD)
+ delay = SPI_DELAY_THRESHOLD;
+
+ timeout = jiffies + msecs_to_jiffies(delay * SPI_DEFAULT_TIMEOUT) + 1;
+ while (!msm_spi_is_valid_state(dd)) {
+ if (time_after(jiffies, timeout)) {
+ if (!msm_spi_is_valid_state(dd)) {
+ if (dd->cur_msg)
+ dd->cur_msg->status = -EIO;
+ dev_err(dd->dev, "%s: SPI operational state"
+ "not valid\n", __func__);
+ return -ETIMEDOUT;
+ } else
+ return 0;
+ }
+ /*
+ * For smaller values of delay, context switch time
+ * would negate the usage of usleep
+ */
+ if (delay > 20)
+ usleep_range(delay, delay);
+ else if (delay)
+ udelay(delay);
+ }
+
+ return 0;
+}
+
+static inline int msm_spi_set_state(struct msm_spi *dd,
+ enum msm_spi_state state)
+{
+ enum msm_spi_state cur_state;
+
+ if (msm_spi_wait_valid(dd))
+ return -EIO;
+
+ cur_state = readl(dd->base + SPI_STATE);
+ /*
+ * Per spec:
+ * For PAUSE_STATE to RESET_STATE, two writes of (10) are required
+ */
+ if (((cur_state & SPI_OP_STATE) == SPI_OP_STATE_PAUSE) &&
+ (state == SPI_OP_STATE_RESET)) {
+ writel(SPI_OP_STATE_CLEAR_BITS, dd->base + SPI_STATE);
+ writel(SPI_OP_STATE_CLEAR_BITS, dd->base + SPI_STATE);
+ } else {
+ writel((cur_state & ~SPI_OP_STATE) | state,
+ dd->base + SPI_STATE);
+ }
+
+ if (msm_spi_wait_valid(dd))
+ return -EIO;
+
+ return 0;
+}
+
+static inline void msm_spi_add_configs(struct msm_spi *dd, u32 *config, int n)
+{
+ *config &= ~(SPI_NO_INPUT|SPI_NO_OUTPUT);
+ if (n != (*config & SPI_CFG_N))
+ *config = (*config & ~SPI_CFG_N) | n;
+}
+
+static void msm_spi_set_config(struct msm_spi *dd, int bpw)
+{
+ u32 spi_config;
+
+ spi_config = readl(dd->base + SPI_CONFIG);
+ if (dd->cur_msg->spi->mode & SPI_CPHA)
+ spi_config &= ~SPI_CFG_INPUT_FIRST;
+ else
+ spi_config |= SPI_CFG_INPUT_FIRST;
+
+ if (dd->cur_msg->spi->mode & SPI_LOOP)
+ spi_config |= SPI_CFG_LOOPBACK;
+ else
+ spi_config &= ~SPI_CFG_LOOPBACK;
+
+ msm_spi_add_configs(dd, &spi_config, bpw-1);
+ writel(spi_config, dd->base + SPI_CONFIG);
+ msm_spi_set_qup_config(dd, bpw);
+}
+
+static irqreturn_t msm_spi_input_irq(int irq, void *dev_id)
+{
+ struct msm_spi *dd = dev_id;
+
+ dd->stat_rx++;
+ if (dd->mode == SPI_FIFO_MODE) {
+ while ((readl(dd->base + SPI_OPERATIONAL) &
+ SPI_OP_IP_FIFO_NOT_EMPTY) &&
+ (dd->rx_bytes_remaining > 0)) {
+ msm_spi_read_word_from_fifo(dd);
+ }
+ if (dd->rx_bytes_remaining == 0)
+ msm_spi_complete(dd);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void msm_spi_write_word_to_fifo(struct msm_spi *dd)
+{
+ u32 word = 0;
+ u8 byte;
+ int i;
+
+ if (dd->write_buf) {
+ for (i = 0; (i < dd->bytes_per_word) &&
+ dd->tx_bytes_remaining; i++) {
+ dd->tx_bytes_remaining--;
+ byte = *dd->write_buf++;
+ word |= (byte << (BITS_PER_BYTE * (3 - i)));
+ }
+ } else
+ if (dd->tx_bytes_remaining > dd->bytes_per_word)
+ dd->tx_bytes_remaining -= dd->bytes_per_word;
+ else
+ dd->tx_bytes_remaining = 0;
+
+ dd->write_xfr_cnt++;
+ if (dd->multi_xfr) {
+ if (!dd->tx_bytes_remaining)
+ dd->write_xfr_cnt = 0;
+ else if ((dd->write_xfr_cnt * dd->bytes_per_word) ==
+ dd->write_len) {
+ struct spi_transfer *t = dd->cur_tx_transfer;
+ if (t->transfer_list.next != &dd->cur_msg->transfers) {
+ t = list_entry(t->transfer_list.next,
+ struct spi_transfer,
+ transfer_list);
+ dd->write_buf = t->tx_buf;
+ dd->write_len = t->len;
+ dd->write_xfr_cnt = 0;
+ dd->cur_tx_transfer = t;
+ }
+ }
+ }
+
+ writel_relaxed(word, dd->base + SPI_OUTPUT_FIFO);
+}
+
+static inline void msm_spi_write_rmn_to_fifo(struct msm_spi *dd)
+{
+ int count = 0;
+
+ while ((dd->tx_bytes_remaining > 0) && (count < dd->input_fifo_size) &&
+ !(readl(dd->base + SPI_OPERATIONAL) &
+ SPI_OP_OUTPUT_FIFO_FULL)) {
+ msm_spi_write_word_to_fifo(dd);
+ count++;
+ }
+}
+
+static irqreturn_t msm_spi_output_irq(int irq, void *dev_id)
+{
+ struct msm_spi *dd = dev_id;
+
+ dd->stat_tx++;
+ /* Output FIFO is empty. Transmit any outstanding write data. */
+ if (dd->mode == SPI_FIFO_MODE)
+ msm_spi_write_rmn_to_fifo(dd);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t msm_spi_error_irq(int irq, void *dev_id)
+{
+ struct spi_master *master = dev_id;
+ struct msm_spi *dd = spi_master_get_devdata(master);
+ u32 spi_err;
+
+ spi_err = readl(dd->base + SPI_ERROR_FLAGS);
+ if (spi_err & SPI_ERR_OUTPUT_OVER_RUN_ERR)
+ dev_warn(master->dev.parent, "SPI output overrun error\n");
+
+ if (spi_err & SPI_ERR_INPUT_UNDER_RUN_ERR)
+ dev_warn(master->dev.parent, "SPI input underrun error\n");
+
+ if (spi_err & SPI_ERR_OUTPUT_UNDER_RUN_ERR)
+ dev_warn(master->dev.parent, "SPI output underrun error\n");
+
+ msm_spi_get_clk_err(dd, &spi_err);
+ if (spi_err & SPI_ERR_CLK_OVER_RUN_ERR)
+ dev_warn(master->dev.parent, "SPI clock overrun error\n");
+
+ if (spi_err & SPI_ERR_CLK_UNDER_RUN_ERR)
+ dev_warn(master->dev.parent, "SPI clock underrun error\n");
+
+ msm_spi_clear_error_flags(dd);
+ msm_spi_ack_clk_err(dd);
+
+ return IRQ_HANDLED;
+}
+
+static void msm_spi_process_transfer(struct msm_spi *dd)
+{
+ u8 bpw;
+ u32 spi_ioc;
+ u32 spi_iom;
+ u32 spi_ioc_orig;
+ u32 max_speed;
+ u32 chip_select;
+ u32 read_count;
+ u32 timeout;
+ u32 int_loopback = 0;
+
+ dd->tx_bytes_remaining = dd->cur_msg_len;
+ dd->rx_bytes_remaining = dd->cur_msg_len;
+ dd->read_buf = dd->cur_transfer->rx_buf;
+ dd->write_buf = dd->cur_transfer->tx_buf;
+ init_completion(&dd->transfer_complete);
+ if (dd->cur_transfer->bits_per_word)
+ bpw = dd->cur_transfer->bits_per_word;
+ else
+ if (dd->cur_msg->spi->bits_per_word)
+ bpw = dd->cur_msg->spi->bits_per_word;
+ else
+ bpw = 8;
+
+ dd->bytes_per_word = (bpw + 7) / 8;
+ if (dd->cur_transfer->speed_hz)
+ max_speed = dd->cur_transfer->speed_hz;
+ else
+ max_speed = dd->cur_msg->spi->max_speed_hz;
+
+ if (!dd->clock_speed || max_speed != dd->clock_speed)
+ msm_spi_clock_set(dd, max_speed);
+
+ read_count = DIV_ROUND_UP(dd->cur_msg_len, dd->bytes_per_word);
+ if (dd->cur_msg->spi->mode & SPI_LOOP)
+ int_loopback = 1;
+
+ if (int_loopback && dd->multi_xfr &&
+ (read_count > dd->input_fifo_size)) {
+ if (dd->read_len && dd->write_len)
+ pr_err(
+ "%s:Internal Loopback does not support > fifo size"
+ "for write-then-read transactions\n",
+ __func__);
+ else if (dd->write_len && !dd->read_len)
+ pr_err(
+ "%s:Internal Loopback does not support > fifo size"
+ "for write-then-write transactions\n",
+ __func__);
+
+ return;
+ }
+
+ dd->mode = SPI_FIFO_MODE;
+ if (dd->multi_xfr) {
+ dd->read_len = dd->cur_transfer->len;
+ dd->write_len = dd->cur_transfer->len;
+ }
+
+ /*
+ * read_count cannot exceed fifo_size, and only one READ COUNT
+ * interrupt is generated per transaction, so for transactions
+ * larger than fifo size READ COUNT must be disabled.
+ */
+ if (read_count <= dd->input_fifo_size) {
+ writel(read_count, dd->base + SPI_MX_READ_COUNT);
+ msm_spi_set_write_count(dd, read_count);
+ } else {
+ writel(0, dd->base + SPI_MX_READ_COUNT);
+ msm_spi_set_write_count(dd, 0);
+ }
+
+ spi_iom = readl(dd->base + SPI_IO_MODES);
+ spi_iom &= ~(SPI_IO_M_INPUT_MODE | SPI_IO_M_OUTPUT_MODE);
+ spi_iom = (spi_iom | (dd->mode << OUTPUT_MODE_SHIFT));
+ spi_iom = (spi_iom | (dd->mode << INPUT_MODE_SHIFT));
+ spi_iom &= ~(SPI_IO_M_PACK_EN | SPI_IO_M_UNPACK_EN);
+
+ writel(spi_iom, dd->base + SPI_IO_MODES);
+ msm_spi_set_config(dd, bpw);
+ spi_ioc = readl(dd->base + SPI_IO_CONTROL);
+ spi_ioc_orig = spi_ioc;
+ if (dd->cur_msg->spi->mode & SPI_CPOL)
+ spi_ioc |= SPI_IO_C_CLK_IDLE_HIGH;
+ else
+ spi_ioc &= ~SPI_IO_C_CLK_IDLE_HIGH;
+
+ chip_select = dd->cur_msg->spi->chip_select << 2;
+ if ((spi_ioc & SPI_IO_C_CS_SELECT) != chip_select)
+ spi_ioc = (spi_ioc & ~SPI_IO_C_CS_SELECT) | chip_select;
+
+ if (!dd->cur_transfer->cs_change)
+ spi_ioc |= SPI_IO_C_MX_CS_MODE;
+
+ if (spi_ioc != spi_ioc_orig)
+ writel(spi_ioc, dd->base + SPI_IO_CONTROL);
+
+ /*
+ * The output fifo interrupt handler will handle all writes
+ * after the first. Restricting this to one write avoids
+ * contention issues and race conditions between this thread
+ * and the int handler.
+ */
+ if (msm_spi_prepare_for_write(dd))
+ goto transfer_end;
+ msm_spi_start_write(dd, read_count);
+
+ /*
+ * Only enter the RUN state after the first word is written into
+ * the output FIFO. Otherwise, the output FIFO EMPTY interrupt
+ * might fire before the first word is written resulting in a
+ * possible race condition.
+ */
+ if (msm_spi_set_state(dd, SPI_OP_STATE_RUN))
+ goto transfer_end;
+
+ timeout = 100 * msecs_to_jiffies(
+ DIV_ROUND_UP(dd->cur_msg_len * 8,
+ DIV_ROUND_UP(max_speed, MSEC_PER_SEC)));
+
+ /* Assume success, this might change later upon transaction result */
+ dd->cur_msg->status = 0;
+ if (!wait_for_completion_timeout(&dd->transfer_complete, timeout)) {
+ dev_err(dd->dev, "%s: SPI transaction timeout\n", __func__);
+ dd->cur_msg->status = -EIO;
+ }
+
+transfer_end:
+ dd->mode = SPI_MODE_NONE;
+ msm_spi_set_state(dd, SPI_OP_STATE_RESET);
+ writel(spi_ioc & ~SPI_IO_C_MX_CS_MODE, dd->base + SPI_IO_CONTROL);
+}
+
+static void get_transfer_length(struct msm_spi *dd)
+{
+ struct spi_transfer *tr;
+ int num_xfrs = 0;
+ int readlen = 0;
+ int writelen = 0;
+
+ dd->cur_msg_len = 0;
+ dd->multi_xfr = 0;
+ dd->read_len = dd->write_len = 0;
+
+ list_for_each_entry(tr, &dd->cur_msg->transfers, transfer_list) {
+ if (tr->tx_buf)
+ writelen += tr->len;
+ if (tr->rx_buf)
+ readlen += tr->len;
+ dd->cur_msg_len += tr->len;
+ num_xfrs++;
+ }
+
+ if (num_xfrs == 2) {
+ struct spi_transfer *first_xfr = dd->cur_transfer;
+
+ dd->multi_xfr = 1;
+ tr = list_entry(first_xfr->transfer_list.next,
+ struct spi_transfer,
+ transfer_list);
+ /*
+ * We update dd->read_len and dd->write_len only
+ * for WR-WR and WR-RD transfers.
+ */
+ if ((first_xfr->tx_buf) && (!first_xfr->rx_buf)) {
+ if (((tr->tx_buf) && (!tr->rx_buf)) ||
+ ((!tr->tx_buf) && (tr->rx_buf))) {
+ dd->read_len = readlen;
+ dd->write_len = writelen;
+ }
+ }
+ } else if (num_xfrs > 1)
+ dd->multi_xfr = 1;
+}
+
+static inline int combine_transfers(struct msm_spi *dd)
+{
+ struct spi_transfer *t = dd->cur_transfer;
+ struct spi_transfer *nxt;
+ int xfrs_grped = 1;
+
+ dd->cur_msg_len = dd->cur_transfer->len;
+ while (t->transfer_list.next != &dd->cur_msg->transfers) {
+ nxt = list_entry(t->transfer_list.next,
+ struct spi_transfer,
+ transfer_list);
+ if (t->cs_change != nxt->cs_change)
+ return xfrs_grped;
+ dd->cur_msg_len += nxt->len;
+ xfrs_grped++;
+ t = nxt;
+ }
+
+ return xfrs_grped;
+}
+
+static void msm_spi_process_message(struct msm_spi *dd)
+{
+ int xfrs_grped = 0;
+ dd->write_xfr_cnt = dd->read_xfr_cnt = 0;
+
+ dd->cur_transfer = list_first_entry(&dd->cur_msg->transfers,
+ struct spi_transfer,
+ transfer_list);
+ get_transfer_length(dd);
+ if (dd->multi_xfr && !dd->read_len && !dd->write_len) {
+ /* Handling of multi-transfers. FIFO mode is used by default */
+ list_for_each_entry(dd->cur_transfer,
+ &dd->cur_msg->transfers,
+ transfer_list) {
+ if (!dd->cur_transfer->len)
+ return;
+
+ if (xfrs_grped) {
+ xfrs_grped--;
+ continue;
+ } else {
+ dd->read_len = dd->write_len = 0;
+ xfrs_grped = combine_transfers(dd);
+ }
+
+ dd->cur_tx_transfer = dd->cur_transfer;
+ dd->cur_rx_transfer = dd->cur_transfer;
+ msm_spi_process_transfer(dd);
+ xfrs_grped--;
+ }
+ } else {
+ dd->cur_tx_transfer = dd->cur_rx_transfer = dd->cur_transfer;
+ msm_spi_process_transfer(dd);
+ }
+}
+
+/* workqueue - pull messages from queue and process */
+static void msm_spi_workq(struct work_struct *work)
+{
+ struct msm_spi *dd =
+ container_of(work, struct msm_spi, work_data);
+ unsigned long flags;
+ u32 status_error = 0;
+
+ mutex_lock(&dd->core_lock);
+ clk_enable(dd->clk);
+ clk_enable(dd->pclk);
+ msm_spi_enable_irqs(dd);
+ if (!msm_spi_is_valid_state(dd)) {
+ dev_err(dd->dev, "%s: SPI operational state not valid\n",
+ __func__);
+ status_error = 1;
+ }
+
+ spin_lock_irqsave(&dd->queue_lock, flags);
+ while (!list_empty(&dd->queue)) {
+ dd->cur_msg = list_entry(dd->queue.next,
+ struct spi_message, queue);
+ list_del_init(&dd->cur_msg->queue);
+ spin_unlock_irqrestore(&dd->queue_lock, flags);
+ if (status_error)
+ dd->cur_msg->status = -EIO;
+ else
+ msm_spi_process_message(dd);
+
+ if (dd->cur_msg->complete)
+ dd->cur_msg->complete(dd->cur_msg->context);
+
+ spin_lock_irqsave(&dd->queue_lock, flags);
+ }
+
+ dd->transfer_pending = 0;
+ spin_unlock_irqrestore(&dd->queue_lock, flags);
+
+ msm_spi_disable_irqs(dd);
+ clk_disable(dd->clk);
+ clk_disable(dd->pclk);
+ mutex_unlock(&dd->core_lock);
+
+ /*
+ * If needed, this can be done after the current message is complete,
+ * and work can be continued upon resume. No motivation for now.
+ */
+ if (dd->suspended)
+ wake_up_interruptible(&dd->continue_suspend);
+}
+
+static int msm_spi_transfer(struct spi_device *spi, struct spi_message *msg)
+{
+ struct msm_spi *dd;
+ unsigned long flags;
+ struct spi_transfer *tr;
+
+ dd = spi_master_get_devdata(spi->master);
+ if (dd->suspended)
+ return -EBUSY;
+
+ if (list_empty(&msg->transfers) || !msg->complete)
+ return -EINVAL;
+
+ list_for_each_entry(tr, &msg->transfers, transfer_list) {
+ /* Check message parameters */
+ if (tr->speed_hz > dd->pdata->max_clock_speed ||
+ (tr->bits_per_word &&
+ (tr->bits_per_word < 4 || tr->bits_per_word > 32)) ||
+ (tr->tx_buf == NULL && tr->rx_buf == NULL)) {
+ dev_err(&spi->dev, "Invalid transfer: %d Hz, %d bpw"
+ "tx=%p, rx=%p\n",
+ tr->speed_hz, tr->bits_per_word,
+ tr->tx_buf, tr->rx_buf);
+ return -EINVAL;
+ }
+ }
+
+ spin_lock_irqsave(&dd->queue_lock, flags);
+ if (dd->suspended) {
+ spin_unlock_irqrestore(&dd->queue_lock, flags);
+ return -EBUSY;
+ }
+
+ dd->transfer_pending = 1;
+ list_add_tail(&msg->queue, &dd->queue);
+ spin_unlock_irqrestore(&dd->queue_lock, flags);
+ queue_work(dd->workqueue, &dd->work_data);
+ return 0;
+}
+
+static int msm_spi_setup(struct spi_device *spi)
+{
+ struct msm_spi *dd;
+ int rc = 0;
+ u32 spi_ioc;
+ u32 spi_config;
+ u32 mask;
+
+ if (spi->bits_per_word < 4 || spi->bits_per_word > 32) {
+ dev_err(&spi->dev, "%s: invalid bits_per_word %d\n",
+ __func__, spi->bits_per_word);
+ rc = -EINVAL;
+ }
+
+ if (spi->chip_select > SPI_NUM_CHIPSELECTS-1) {
+ dev_err(&spi->dev, "%s, chip select %d exceeds max value %d\n",
+ __func__, spi->chip_select, SPI_NUM_CHIPSELECTS - 1);
+ rc = -EINVAL;
+ }
+
+ if (rc)
+ goto err_setup_exit;
+
+ dd = spi_master_get_devdata(spi->master);
+
+ mutex_lock(&dd->core_lock);
+ if (dd->suspended) {
+ mutex_unlock(&dd->core_lock);
+ return -EBUSY;
+ }
+
+ clk_enable(dd->clk);
+ clk_enable(dd->pclk);
+ spi_ioc = readl(dd->base + SPI_IO_CONTROL);
+ mask = SPI_IO_C_CS_N_POLARITY_0 << spi->chip_select;
+ if (spi->mode & SPI_CS_HIGH)
+ spi_ioc |= mask;
+ else
+ spi_ioc &= ~mask;
+
+ if (spi->mode & SPI_CPOL)
+ spi_ioc |= SPI_IO_C_CLK_IDLE_HIGH;
+ else
+ spi_ioc &= ~SPI_IO_C_CLK_IDLE_HIGH;
+
+ writel(spi_ioc, dd->base + SPI_IO_CONTROL);
+ spi_config = readl(dd->base + SPI_CONFIG);
+ if (spi->mode & SPI_LOOP)
+ spi_config |= SPI_CFG_LOOPBACK;
+ else
+ spi_config &= ~SPI_CFG_LOOPBACK;
+
+ if (spi->mode & SPI_CPHA)
+ spi_config &= ~SPI_CFG_INPUT_FIRST;
+ else
+ spi_config |= SPI_CFG_INPUT_FIRST;
+
+ writel(spi_config, dd->base + SPI_CONFIG);
+ clk_disable(dd->clk);
+ clk_disable(dd->pclk);
+ mutex_unlock(&dd->core_lock);
+
+err_setup_exit:
+ return rc;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static int debugfs_iomem_x32_set(void *data, u64 val)
+{
+ iowrite32(val, data);
+ /* Ensure the previous write completed. */
+ wmb();
+ return 0;
+}
+
+static int debugfs_iomem_x32_get(void *data, u64 *val)
+{
+ *val = ioread32(data);
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_iomem_x32, debugfs_iomem_x32_get,
+ debugfs_iomem_x32_set, "0x%08llx\n");
+
+static void spi_debugfs_init(struct msm_spi *dd)
+{
+ dd->dent_spi = debugfs_create_dir(dev_name(dd->dev), NULL);
+ if (dd->dent_spi) {
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(debugfs_spi_regs); i++) {
+ dd->debugfs_spi_regs[i] =
+ debugfs_create_file(
+ debugfs_spi_regs[i].name,
+ debugfs_spi_regs[i].mode,
+ dd->dent_spi,
+ dd->base + debugfs_spi_regs[i].offset,
+ &fops_iomem_x32);
+ }
+ }
+}
+
+static void spi_debugfs_exit(struct msm_spi *dd)
+{
+ if (dd->dent_spi) {
+ int i;
+
+ debugfs_remove_recursive(dd->dent_spi);
+ dd->dent_spi = NULL;
+ for (i = 0; i < ARRAY_SIZE(debugfs_spi_regs); i++)
+ dd->debugfs_spi_regs[i] = NULL;
+ }
+}
+#else
+static void spi_debugfs_init(struct msm_spi *dd) {}
+static void spi_debugfs_exit(struct msm_spi *dd) {}
+#endif
+
+/* ===Device attributes begin=== */
+static ssize_t show_stats(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct msm_spi *dd = spi_master_get_devdata(master);
+
+ return snprintf(buf, PAGE_SIZE,
+ "Device %s\n"
+ "rx fifo_size = %d spi words\n"
+ "tx fifo_size = %d spi words\n"
+ "rx block size = %d bytes\n"
+ "tx block size = %d bytes\n"
+ "--statistics--\n"
+ "Rx isrs = %d\n"
+ "Tx isrs = %d\n"
+ "--debug--\n"
+ "NA yet\n",
+ dev_name(dev),
+ dd->input_fifo_size,
+ dd->output_fifo_size,
+ dd->input_block_size,
+ dd->output_block_size,
+ dd->stat_rx,
+ dd->stat_tx
+ );
+}
+
+/* Reset statistics on write */
+static ssize_t set_stats(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct msm_spi *dd = dev_get_drvdata(dev);
+
+ dd->stat_rx = 0;
+ dd->stat_tx = 0;
+ return count;
+}
+
+static DEVICE_ATTR(stats, S_IRUGO | S_IWUSR, show_stats, set_stats);
+
+static struct attribute *dev_attrs[] = {
+ &dev_attr_stats.attr,
+ NULL,
+};
+
+static struct attribute_group dev_attr_grp = {
+ .attrs = dev_attrs,
+};
+/* ===Device attributes end=== */
+
+static int __init msm_spi_probe(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct msm_spi *dd;
+ struct resource *resource;
+ int rc = -ENXIO;
+ int locked = 0;
+ int clk_enabled = 0;
+ int pclk_enabled = 0;
+ struct msm_spi_platform_data *pdata = pdev->dev.platform_data;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct msm_spi));
+ if (!master) {
+ rc = -ENOMEM;
+ dev_err(&pdev->dev, "master allocation failed\n");
+ goto err_probe_exit;
+ }
+
+ master->bus_num = pdev->id;
+ master->mode_bits = SPI_SUPPORTED_MODES;
+ master->num_chipselect = SPI_NUM_CHIPSELECTS;
+ master->setup = msm_spi_setup;
+ master->transfer = msm_spi_transfer;
+ platform_set_drvdata(pdev, master);
+ dd = spi_master_get_devdata(master);
+
+ dd->pdata = pdata;
+ rc = msm_spi_get_irq_data(dd, pdev);
+ if (rc)
+ goto err_probe_res;
+
+ resource = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM, "spi_base");
+ if (!resource) {
+ rc = -ENXIO;
+ goto err_probe_res;
+ }
+
+ dd->mem_phys_addr = resource->start;
+ dd->mem_size = resource_size(resource);
+
+ spin_lock_init(&dd->queue_lock);
+ mutex_init(&dd->core_lock);
+ INIT_LIST_HEAD(&dd->queue);
+ INIT_WORK(&dd->work_data, msm_spi_workq);
+ init_waitqueue_head(&dd->continue_suspend);
+ dd->workqueue = create_singlethread_workqueue(
+ dev_name(master->dev.parent));
+ if (!dd->workqueue)
+ goto err_probe_res;
+
+ if (!devm_request_mem_region(&pdev->dev, dd->mem_phys_addr,
+ dd->mem_size, SPI_DRV_NAME)) {
+ rc = -ENXIO;
+ goto err_probe_reqmem;
+ }
+
+ dd->base = devm_ioremap(&pdev->dev, dd->mem_phys_addr, dd->mem_size);
+ if (!dd->base) {
+ rc = -ENOMEM;
+ goto err_probe_reqmem;
+ }
+
+
+ mutex_lock(&dd->core_lock);
+ locked = 1;
+ dd->dev = &pdev->dev;
+ dd->clk = clk_get(&pdev->dev, "spi_clk");
+ if (IS_ERR(dd->clk)) {
+ dev_err(&pdev->dev, "%s: unable to get spi_clk\n", __func__);
+ rc = PTR_ERR(dd->clk);
+ goto err_probe_clk_get;
+ }
+
+ dd->pclk = clk_get(&pdev->dev, "spi_pclk");
+ if (IS_ERR(dd->pclk)) {
+ dev_err(&pdev->dev, "%s: unable to get spi_pclk\n", __func__);
+ rc = PTR_ERR(dd->pclk);
+ goto err_probe_pclk_get;
+ }
+
+ if (pdata && pdata->max_clock_speed)
+ msm_spi_clock_set(dd, dd->pdata->max_clock_speed);
+
+ rc = clk_enable(dd->clk);
+ if (rc) {
+ dev_err(&pdev->dev, "%s: unable to enable spi_clk\n",
+ __func__);
+ goto err_probe_clk_enable;
+ }
+
+ clk_enabled = 1;
+ rc = clk_enable(dd->pclk);
+ if (rc) {
+ dev_err(&pdev->dev, "%s: unable to enable spi_pclk\n",
+ __func__);
+ goto err_probe_pclk_enable;
+ }
+
+ pclk_enabled = 1;
+ rc = msm_spi_configure_gsbi(dd, pdev);
+ if (rc)
+ goto err_probe_gsbi;
+
+ msm_spi_calculate_fifo_size(dd);
+
+ /* Initialize registers */
+ writel(0x00000001, dd->base + SPI_SW_RESET);
+ msm_spi_set_state(dd, SPI_OP_STATE_RESET);
+ writel(0x00000000, dd->base + SPI_OPERATIONAL);
+ writel(0x00000000, dd->base + SPI_CONFIG);
+ writel(0x00000000, dd->base + SPI_IO_MODES);
+ /*
+ * The SPI core generates a bogus input overrun error on some targets,
+ * when a transition from run to reset state occurs and if the FIFO has
+ * an odd number of entries. Hence we disable the INPUT_OVER_RUN_ERR_EN
+ * bit.
+ */
+ msm_spi_enable_error_flags(dd);
+
+ writel(SPI_IO_C_NO_TRI_STATE, dd->base + SPI_IO_CONTROL);
+ rc = msm_spi_set_state(dd, SPI_OP_STATE_RESET);
+ if (rc)
+ goto err_probe_state;
+
+ clk_disable(dd->clk);
+ clk_disable(dd->pclk);
+ clk_enabled = 0;
+ pclk_enabled = 0;
+
+ dd->suspended = 0;
+ dd->transfer_pending = 0;
+ dd->multi_xfr = 0;
+ dd->mode = SPI_MODE_NONE;
+
+ rc = msm_spi_request_irq(dd, pdev->name, master);
+ if (rc)
+ goto err_probe_irq;
+
+ msm_spi_disable_irqs(dd);
+ mutex_unlock(&dd->core_lock);
+ locked = 0;
+
+ rc = spi_register_master(master);
+ if (rc)
+ goto err_probe_reg_master;
+
+ rc = sysfs_create_group(&(dd->dev->kobj), &dev_attr_grp);
+ if (rc) {
+ dev_err(&pdev->dev, "failed to create dev. attrs : %d\n", rc);
+ goto err_attrs;
+ }
+
+ spi_debugfs_init(dd);
+
+ return 0;
+
+err_attrs:
+ spi_unregister_master(master);
+err_probe_reg_master:
+ msm_spi_free_irq(dd, master);
+err_probe_irq:
+err_probe_state:
+err_probe_gsbi:
+ if (pclk_enabled)
+ clk_disable(dd->pclk);
+err_probe_pclk_enable:
+ if (clk_enabled)
+ clk_disable(dd->clk);
+err_probe_clk_enable:
+ clk_put(dd->pclk);
+err_probe_pclk_get:
+ clk_put(dd->clk);
+err_probe_clk_get:
+ if (locked)
+ mutex_unlock(&dd->core_lock);
+err_probe_reqmem:
+ destroy_workqueue(dd->workqueue);
+err_probe_res:
+ spi_master_put(master);
+err_probe_exit:
+ return rc;
+}
+
+#ifdef CONFIG_PM
+static int msm_spi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct msm_spi *dd;
+ unsigned long flags;
+
+ if (!master)
+ goto suspend_exit;
+
+ dd = spi_master_get_devdata(master);
+ if (!dd)
+ goto suspend_exit;
+
+ /* Make sure nothing is added to the queue while we're suspending */
+ spin_lock_irqsave(&dd->queue_lock, flags);
+ dd->suspended = 1;
+ spin_unlock_irqrestore(&dd->queue_lock, flags);
+
+ /* Wait for transactions to end, or time out */
+ wait_event_interruptible(dd->continue_suspend, !dd->transfer_pending);
+
+suspend_exit:
+ return 0;
+}
+
+static int msm_spi_resume(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct msm_spi *dd;
+
+ if (!master)
+ goto resume_exit;
+
+ dd = spi_master_get_devdata(master);
+ if (!dd)
+ goto resume_exit;
+
+ dd->suspended = 0;
+resume_exit:
+ return 0;
+}
+#else
+#define msm_spi_suspend NULL
+#define msm_spi_resume NULL
+#endif /* CONFIG_PM */
+
+static int __devexit msm_spi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct msm_spi *dd = spi_master_get_devdata(master);
+
+ spi_debugfs_exit(dd);
+ sysfs_remove_group(&pdev->dev.kobj, &dev_attr_grp);
+
+ msm_spi_free_irq(dd, master);
+ clk_put(dd->clk);
+ clk_put(dd->pclk);
+ destroy_workqueue(dd->workqueue);
+ platform_set_drvdata(pdev, 0);
+ spi_unregister_master(master);
+ spi_master_put(master);
+
+ return 0;
+}
+
+static struct platform_driver msm_spi_driver = {
+ .driver = {
+ .name = SPI_DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .suspend = msm_spi_suspend,
+ .resume = msm_spi_resume,
+ .remove = __exit_p(msm_spi_remove),
+};
+
+static int __init msm_spi_init(void)
+{
+ return platform_driver_probe(&msm_spi_driver, msm_spi_probe);
+}
+module_init(msm_spi_init);
+
+static void __exit msm_spi_exit(void)
+{
+ platform_driver_unregister(&msm_spi_driver);
+}
+module_exit(msm_spi_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.3");
+MODULE_ALIAS("platform:"SPI_DRV_NAME);
diff --git a/include/linux/platform_data/msm_spi.h
b/include/linux/platform_data/msm_spi.h
new file mode 100644
index 0000000..a37ef6d
--- /dev/null
+++ b/include/linux/platform_data/msm_spi.h
@@ -0,0 +1,19 @@
+/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_SPI_H
+#define __ARCH_ARM_MACH_MSM_SPI_H
+
+struct msm_spi_platform_data {
+ u32 max_clock_speed;
+};
+#endif
--
1.7.3.3
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
spi-devel-general mailing list
spi-devel-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/spi-devel-general
