On Sat, 10 Mar 2012 09:48:46 +0900, Kyoungil Kim <[email protected]> wrote:
> I found that there are two kind of direction type.
> First one is dma_data_direction defined in include/linux/dma-direction.h.
> It is used for parameter of dma_map/unmap_single in spi-s3c64xx.
> The other one is dma_transter_direction defined in include/linux/dmaengine.h.
> It is used for direction of samsung DMA operation
> (arch/arm/plat-samsung/dma-ops.c).
> This patch is just some changes to use direction defines
> which is used in samsung DMA operation.
> 
> Signed-off-by: Boojin Kim <[email protected]>
> Signed-off-by: Kyoungil Kim <[email protected]>

Applied, thanks.

g.

> ---
>  drivers/spi/spi-s3c64xx.c |   10 +++++-----
>  1 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
> index dcf7e10..003a1bf 100644
> --- a/drivers/spi/spi-s3c64xx.c
> +++ b/drivers/spi/spi-s3c64xx.c
> @@ -239,7 +239,7 @@ static void s3c64xx_spi_dmacb(void *data)
>       struct s3c64xx_spi_dma_data *dma = data;
>       unsigned long flags;
>  
> -     if (dma->direction == DMA_FROM_DEVICE)
> +     if (dma->direction == DMA_DEV_TO_MEM)
>               sdd = container_of(data,
>                       struct s3c64xx_spi_driver_data, rx_dma);
>       else
> @@ -248,7 +248,7 @@ static void s3c64xx_spi_dmacb(void *data)
>  
>       spin_lock_irqsave(&sdd->lock, flags);
>  
> -     if (dma->direction == DMA_FROM_DEVICE) {
> +     if (dma->direction == DMA_DEV_TO_MEM) {
>               sdd->state &= ~RXBUSY;
>               if (!(sdd->state & TXBUSY))
>                       complete(&sdd->xfer_completion);
> @@ -267,7 +267,7 @@ static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
>       struct s3c64xx_spi_driver_data *sdd;
>       struct samsung_dma_prep_info info;
>  
> -     if (dma->direction == DMA_FROM_DEVICE)
> +     if (dma->direction == DMA_DEV_TO_MEM) {
>               sdd = container_of((void *)dma,
>                       struct s3c64xx_spi_driver_data, rx_dma);
>       else
> @@ -1021,9 +1021,9 @@ static int __init s3c64xx_spi_probe(struct 
> platform_device *pdev)
>       sdd->pdev = pdev;
>       sdd->sfr_start = mem_res->start;
>       sdd->tx_dma.dmach = dmatx_res->start;
> -     sdd->tx_dma.direction = DMA_TO_DEVICE;
> +     sdd->tx_dma.direction = DMA_MEM_TO_DEV;
>       sdd->rx_dma.dmach = dmarx_res->start;
> -     sdd->rx_dma.direction = DMA_FROM_DEVICE;
> +     sdd->rx_dma.direction = DMA_DEV_TO_MEM;
>  
>       sdd->cur_bpw = 8;
>  
> -- 
> 1.7.1
> 

-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies,Ltd.

------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing 
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/
_______________________________________________
spi-devel-general mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/spi-devel-general

Reply via email to