Dear Attila Kinali, > On Mon, 16 Jul 2012 14:09:52 +0200 > > Marek Vasut <[email protected]> wrote: > > Pull out the MMC clock configuration function and make it > > into SSP clock configuration function, so it can be used by > > the SPI driver too. > > > > diff --git a/drivers/clk/mxs/clk-ssp.c b/drivers/clk/mxs/clk-ssp.c > > new file mode 100644 > > index 0000000..b3c1e16 > > --- /dev/null > > +++ b/drivers/clk/mxs/clk-ssp.c > > @@ -0,0 +1,61 @@ > > +/* > > + * Copyright 2012 DENX Software Engineering, GmbH > > + * > > + * Pulled from code: > > + * Portions copyright (C) 2003 Russell King, PXA MMCI Driver > > + * Portions copyright (C) 2004-2005 Pierre Ossman, W83L51xD SD/MMC > > driver + * > > + * Copyright 2008 Embedded Alley Solutions, Inc. > > + * Copyright 2009-2011 Freescale Semiconductor, Inc. > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 or later at the following locations: > > + * > > + * http://www.opensource.org/licenses/gpl-license.html > > + * http://www.gnu.org/copyleft/gpl.html > > + */ > > + > > +#include <linux/kernel.h> > > +#include <linux/init.h> > > +#include <linux/clk.h> > > +#include <linux/module.h> > > +#include <linux/device.h> > > +#include <linux/io.h> > > +#include <linux/spi/mxs-spi.h> > > + > > +void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate) > > +{ > > + unsigned int ssp_clk, ssp_sck; > > + u32 clock_divide, clock_rate; > > + u32 val; > > + > > + ssp_clk = clk_get_rate(ssp->clk); > > + > > + for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) { > > + clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide); > > + clock_rate = (clock_rate > 0) ? clock_rate - 1 : 0; > > + if (clock_rate <= 255) > > + break; > > + } > > + > > + if (clock_divide > 254) { > > + dev_err(ssp->dev, > > + "%s: cannot set clock to %d\n", __func__, rate); > > + return; > > + } > > + > > + ssp_sck = ssp_clk / clock_divide / (1 + clock_rate); > > + > > + val = readl(ssp->base + HW_SSP_TIMING(ssp)); > > + val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE); > > + val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE); > > + val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE); > > + writel(val, ssp->base + HW_SSP_TIMING(ssp)); > > + > > + ssp->clk_rate = ssp_sck; > > + > > + dev_dbg(ssp->dev, > > + "%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, > > rate_requested %d\n", + __func__, clock_divide, clock_rate, ssp_clk, > > ssp_sck, rate); > > +} > > There is a EXPORT_SYMBOL_GPL(mxs_ssp_set_clk_rate); missing here.
What for? Best regards, Marek Vasut ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ spi-devel-general mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/spi-devel-general
