On Wed, Nov 14, 2012 at 8:44 AM, Daniel Mack <[email protected]> wrote:
> 0384e90b8 ("spi/mcspi: allow configuration of pin directions") did what
> it claimed to do the wrong way around. D0/D1 is configured as output by
> *clearing* the bits in the conf registers, hence also breaking the
> former default behaviour.
>
> Fix this before that change is merged to mainline.
>
Indeed. Thanks.
Reviewed-by: Shubhrajyoti D <[email protected]>

> Signed-off-by: Daniel Mack <[email protected]>
> ---
> Resent to apply directly on top of original commit.
>
>  Documentation/devicetree/bindings/spi/omap-spi.txt | 6 +++---
>  drivers/spi/spi-omap2-mcspi.c                      | 6 +++---
>  include/linux/platform_data/spi-omap2-mcspi.h      | 4 ++--
>  3 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt 
> b/Documentation/devicetree/bindings/spi/omap-spi.txt
> index 2ef0a6b..938809c 100644
> --- a/Documentation/devicetree/bindings/spi/omap-spi.txt
> +++ b/Documentation/devicetree/bindings/spi/omap-spi.txt
> @@ -6,9 +6,9 @@ Required properties:
>    - "ti,omap4-spi" for OMAP4+.
>  - ti,spi-num-cs : Number of chipselect supported  by the instance.
>  - ti,hwmods: Name of the hwmod associated to the McSPI
> -- ti,pindir-d0-in-d1-out: Select the D0 pin as input and D1 as
> -                         output. The default is D0 as output and
> -                         D1 as input.
> +- ti,pindir-d0-out-d1-in: Select the D0 pin as output and D1 as
> +                         input. The default is D0 as input and
> +                         D1 as output.
>
>  Example:
>
> diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
> index 5104633..89f73c4 100644
> --- a/drivers/spi/spi-omap2-mcspi.c
> +++ b/drivers/spi/spi-omap2-mcspi.c
> @@ -766,7 +766,7 @@ static int omap2_mcspi_setup_transfer(struct spi_device 
> *spi,
>         /* standard 4-wire master mode:  SCK, MOSI/out, MISO/in, nCS
>          * REVISIT: this controller could support SPI_3WIRE mode.
>          */
> -       if (mcspi->pin_dir == MCSPI_PINDIR_D0_OUT_D1_IN) {
> +       if (mcspi->pin_dir == MCSPI_PINDIR_D0_IN_D1_OUT) {
>                 l &= ~OMAP2_MCSPI_CHCONF_IS;
>                 l &= ~OMAP2_MCSPI_CHCONF_DPE1;
>                 l |= OMAP2_MCSPI_CHCONF_DPE0;
> @@ -1188,8 +1188,8 @@ static int __devinit omap2_mcspi_probe(struct 
> platform_device *pdev)
>                 of_property_read_u32(node, "ti,spi-num-cs", &num_cs);
>                 master->num_chipselect = num_cs;
>                 master->bus_num = bus_num++;
> -               if (of_get_property(node, "ti,pindir-d0-in-d1-out", NULL))
> -                       mcspi->pin_dir = MCSPI_PINDIR_D0_IN_D1_OUT;
> +               if (of_get_property(node, "ti,pindir-d0-out-d1-in", NULL))
> +                       mcspi->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
>         } else {
>                 pdata = pdev->dev.platform_data;
>                 master->num_chipselect = pdata->num_cs;
> diff --git a/include/linux/platform_data/spi-omap2-mcspi.h 
> b/include/linux/platform_data/spi-omap2-mcspi.h
> index ce70f7b..a65572d 100644
> --- a/include/linux/platform_data/spi-omap2-mcspi.h
> +++ b/include/linux/platform_data/spi-omap2-mcspi.h
> @@ -7,8 +7,8 @@
>
>  #define OMAP4_MCSPI_REG_OFFSET 0x100
>
> -#define MCSPI_PINDIR_D0_OUT_D1_IN      0
> -#define MCSPI_PINDIR_D0_IN_D1_OUT      1
> +#define MCSPI_PINDIR_D0_IN_D1_OUT      0
> +#define MCSPI_PINDIR_D0_OUT_D1_IN      1
>
>  struct omap2_mcspi_platform_config {
>         unsigned short  num_cs;
> --
> 1.7.11.7
>
>
> ------------------------------------------------------------------------------
> Monitor your physical, virtual and cloud infrastructure from a single
> web console. Get in-depth insight into apps, servers, databases, vmware,
> SAP, cloud infrastructure, etc. Download 30-day Free Trial.
> Pricing starts from $795 for 25 servers or applications!
> http://p.sf.net/sfu/zoho_dev2dev_nov
> _______________________________________________
> spi-devel-general mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/spi-devel-general

------------------------------------------------------------------------------
Monitor your physical, virtual and cloud infrastructure from a single
web console. Get in-depth insight into apps, servers, databases, vmware,
SAP, cloud infrastructure, etc. Download 30-day Free Trial.
Pricing starts from $795 for 25 servers or applications!
http://p.sf.net/sfu/zoho_dev2dev_nov
_______________________________________________
spi-devel-general mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/spi-devel-general

Reply via email to