From: Joel A Fernandes <[email protected]> Build TI_EDMA by default for ARCH_DAVINCI and ARCH_OMAP2PLUS
Signed-off-by: Joel A Fernandes <[email protected]> --- arch/arm/Kconfig | 1 + arch/arm/mach-omap2/Kconfig | 1 + drivers/dma/Kconfig | 2 +- 3 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b1c66a4..7d58cd9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -841,6 +841,7 @@ config ARCH_DAVINCI select HAVE_IDE select NEED_MACH_GPIO_H select TI_PRIV_EDMA + select DMADEVICES select USE_OF select ZONE_DMA help diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index f91b07f..c02f083 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -17,6 +17,7 @@ config ARCH_OMAP2PLUS select PROC_DEVICETREE if PROC_FS select SOC_BUS select SPARSE_IRQ + select DMADEVICES select TI_PRIV_EDMA select USE_OF help diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 3215a3c..b2d6f15 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -216,7 +216,7 @@ config TI_EDMA depends on ARCH_DAVINCI || ARCH_OMAP select DMA_ENGINE select DMA_VIRTUAL_CHANNELS - default n + default y help Enable support for the TI EDMA controller. This DMA engine is found on TI DaVinci and AM33xx parts. -- 1.7.9.5 ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ spi-devel-general mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/spi-devel-general
