On Fri, Jun 28, 2013 at 11:45:28AM -0700, H Hartley Sweeten wrote: > The divider values stored in the per chip data are only used to set the > registers in the hardware to generate the desired SPI clock. Since these > are calculated per transfer based on the t->speed_hz there is no reason > keep them in the per chip data. > > Move the ep93xx_spi_calc_divisors() call into ep93xx_spi_chip_setup() > and return the dividers thru pointers. Remove the divider values from > the per chip data structure. > > Signed-off-by: H Hartley Sweeten <[email protected]> > Cc: Ryan Mallon <[email protected]> > Cc: Mika Westerberg <[email protected]>
Acked-by: Mika Westerberg <[email protected]> ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ spi-devel-general mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/spi-devel-general
