On Tue, Apr 26, 2011 at 08:39:13PM +0200, Attila Sukosd wrote: > Also I've attached the patch which fixes a few things here and there... With > this it builds fine. >
Can you clean up the commenting out part of the patch (Makefile.am you comment out a single line, you can probably ifdef it based on some arch variable, introduce one if there isn't already), and send it inlined, not as attachment? > > Best Regards, > > Attila Sukosd > > ----------------------------------------- > DTU Computing Center - www.cc.dtu.dk > [email protected], [email protected], [email protected] > > > > > On Tue, Apr 26, 2011 at 8:36 PM, Attila Sukosd <[email protected]>wrote: > > > Hi, > > > > > > You can specify it to use gstreamer instead of pulseaudio, and install > > gstreamer from macports and it builds fine. > > > > Best Regards, > > > > Attila Sukosd > > > > ----------------------------------------- > > DTU Computing Center - www.cc.dtu.dk > > [email protected], [email protected], [email protected] > > > > > > > > > > On Tue, Apr 26, 2011 at 8:23 PM, Cliff Sharp <[email protected]> wrote: > > > >> I am getting much further with the Third Phase than the rest. > >> spice-gtk does require pulseaudio > >> It is not in MacPorts (celt051) > >> > >> When doing a sudo make install with pulseaudio I get the following: > >> > >> make install-recursive > >> Making install in src > >> make install-am > >> CC libpulsecommon_0.9.22_la-client-conf.lo > >> CC libpulsecommon_0.9.22_la-i18n.lo > >> CC libpulsecommon_0.9.22_la-fork-detect.lo > >> CC libpulsecommon_0.9.22_la-authkey.lo > >> CC libpulsecommon_0.9.22_la-conf-parser.lo > >> CC libpulsecommon_0.9.22_la-core-error.lo > >> CC libpulsecommon_0.9.22_la-core-rtclock.lo > >> CC libpulsecommon_0.9.22_la-core-util.lo > >> pulsecore/core-util.c: In function 'pa_hexstr': > >> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop > >> counter may overflow [-Wunsafe-loop-optimizations] > >> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop > >> counter may overflow [-Wunsafe-loop-optimizations] > >> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop > >> counter may overflow [-Wunsafe-loop-optimizations] > >> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop > >> counter may overflow [-Wunsafe-loop-optimizations] > >> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop > >> counter may overflow [-Wunsafe-loop-optimizations] > >> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop > >> counter may overflow [-Wunsafe-loop-optimizations] > >> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop > >> counter may overflow [-Wunsafe-loop-optimizations] > >> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop > >> counter may overflow [-Wunsafe-loop-optimizations] > >> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop > >> counter may overflow [-Wunsafe-loop-optimizations] > >> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop > >> counter may overflow [-Wunsafe-loop-optimizations] > >> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop > >> counter may overflow [-Wunsafe-loop-optimizations] > >> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop > >> counter may overflow [-Wunsafe-loop-optimizations] > >> pulsecore/core-util.c:1818: warning: cannot optimize loop, the loop > >> counter may overflow [-Wunsafe-loop-optimizations] > >> CC libpulsecommon_0.9.22_la-dynarray.lo > >> CC libpulsecommon_0.9.22_la-flist.lo > >> CC libpulsecommon_0.9.22_la-hashmap.lo > >> CC libpulsecommon_0.9.22_la-idxset.lo > >> CC libpulsecommon_0.9.22_la-inet_ntop.lo > >> CC libpulsecommon_0.9.22_la-inet_pton.lo > >> CC libpulsecommon_0.9.22_la-iochannel.lo > >> CC libpulsecommon_0.9.22_la-ioline.lo > >> CC libpulsecommon_0.9.22_la-ipacl.lo > >> pulsecore/ipacl.c: In function 'pa_ip_acl_check': > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:229: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> pulsecore/ipacl.c:241: warning: cannot optimize loop, the loop counter may > >> overflow [-Wunsafe-loop-optimizations] > >> CC libpulsecommon_0.9.22_la-lock-autospawn.lo > >> CC libpulsecommon_0.9.22_la-log.lo > >> CC libpulsecommon_0.9.22_la-ratelimit.lo > >> CC libpulsecommon_0.9.22_la-mcalign.lo > >> CC libpulsecommon_0.9.22_la-memblock.lo > >> CC libpulsecommon_0.9.22_la-memblockq.lo > >> CC libpulsecommon_0.9.22_la-memchunk.lo > >> CC libpulsecommon_0.9.22_la-once.lo > >> CC libpulsecommon_0.9.22_la-packet.lo > >> CC libpulsecommon_0.9.22_la-parseaddr.lo > >> CC libpulsecommon_0.9.22_la-pdispatch.lo > >> CC libpulsecommon_0.9.22_la-pid.lo > >> CC libpulsecommon_0.9.22_la-pipe.lo > >> CC libpulsecommon_0.9.22_la-poll.lo > >> CC libpulsecommon_0.9.22_la-prioq.lo > >> CC libpulsecommon_0.9.22_la-memtrap.lo > >> CC libpulsecommon_0.9.22_la-aupdate.lo > >> CC libpulsecommon_0.9.22_la-proplist-util.lo > >> CC libpulsecommon_0.9.22_la-pstream-util.lo > >> CC libpulsecommon_0.9.22_la-pstream.lo > >> CC libpulsecommon_0.9.22_la-queue.lo > >> CC libpulsecommon_0.9.22_la-random.lo > >> CC libpulsecommon_0.9.22_la-shm.lo > >> CC libpulsecommon_0.9.22_la-bitset.lo > >> CC libpulsecommon_0.9.22_la-socket-client.lo > >> CC libpulsecommon_0.9.22_la-socket-server.lo > >> CC libpulsecommon_0.9.22_la-socket-util.lo > >> CC libpulsecommon_0.9.22_la-strbuf.lo > >> CC libpulsecommon_0.9.22_la-strlist.lo > >> CC libpulsecommon_0.9.22_la-tagstruct.lo > >> CC libpulsecommon_0.9.22_la-time-smoother.lo > >> CC libpulsecommon_0.9.22_la-tokenizer.lo > >> CC libpulsecommon_0.9.22_la-usergroup.lo > >> CC libpulsecommon_0.9.22_la-sndfile-util.lo > >> In file included from pulsecore/sndfile-util.h:25, > >> from pulsecore/sndfile-util.c:34: > >> /opt/local/include/sndfile.h:655:5: warning: > >> "ENABLE_SNDFILE_WINDOWS_PROTOTYPES" is not defined > >> CC libpulsecommon_0.9.22_la-mutex-posix.lo > >> CC libpulsecommon_0.9.22_la-thread-posix.lo > >> CC libpulsecommon_0.9.22_la-semaphore-posix.lo > >> CC libpulsecommon_0.9.22_la-dbus-util.lo > >> CC libpulsecommon_0.9.22_la-rtkit.lo > >> CCLD libpulsecommon-0.9.22.la > >> CC libpulse_la-channelmap.lo > >> CC libpulse_la-context.lo > >> CC libpulse_la-error.lo > >> CC libpulse_la-ext-device-manager.lo > >> CC libpulse_la-ext-stream-restore.lo > >> CC libpulse_la-introspect.lo > >> CC libpulse_la-mainloop-api.lo > >> CC libpulse_la-mainloop-signal.lo > >> CC libpulse_la-mainloop.lo > >> CC libpulse_la-operation.lo > >> CC libpulse_la-proplist.lo > >> CC libpulse_la-rtclock.lo > >> CC libpulse_la-sample.lo > >> CC libpulse_la-scache.lo > >> CC libpulse_la-stream.lo > >> CC libpulse_la-subscribe.lo > >> CC libpulse_la-thread-mainloop.lo > >> CC libpulse_la-timeval.lo > >> CC libpulse_la-utf8.lo > >> CC libpulse_la-util.lo > >> CC libpulse_la-volume.lo > >> CC libpulse_la-xmalloc.lo > >> CCLD libpulse.la > >> CC libpulse_simple_la-simple.lo > >> CCLD libpulse-simple.la > >> CC libpulse_mainloop_glib_la-glib-mainloop.lo > >> CCLD libpulse-mainloop-glib.la > >> CC libpulsecore_0.9.22_la-asyncmsgq.lo > >> CC libpulsecore_0.9.22_la-asyncq.lo > >> CC libpulsecore_0.9.22_la-auth-cookie.lo > >> CC libpulsecore_0.9.22_la-cli-command.lo > >> CC libpulsecore_0.9.22_la-cli-text.lo > >> CC libpulsecore_0.9.22_la-client.lo > >> CC libpulsecore_0.9.22_la-card.lo > >> CC libpulsecore_0.9.22_la-core-scache.lo > >> CC libpulsecore_0.9.22_la-core-subscribe.lo > >> CC libpulsecore_0.9.22_la-core.lo > >> CC libpulsecore_0.9.22_la-envelope.lo > >> pulsecore/envelope.c: In function 'envelope_merge': > >> pulsecore/envelope.c:407: warning: 'min_k' may be used uninitialized in > >> this function [-Wuninitialized] > >> pulsecore/envelope.c:395: warning: 'min_f' may be used uninitialized in > >> this function [-Wuninitialized] > >> pulsecore/envelope.c: In function 'pa_envelope_replace': > >> pulsecore/envelope.c:473: warning: 'saved_i' may be used uninitialized in > >> this function [-Wuninitialized] > >> pulsecore/envelope.c:472: warning: 'saved_f' may be used uninitialized in > >> this function [-Wuninitialized] > >> CC libpulsecore_0.9.22_la-fdsem.lo > >> CC libpulsecore_0.9.22_la-g711.lo > >> CC libpulsecore_0.9.22_la-hook-list.lo > >> CC libpulsecore_0.9.22_la-ltdl-helper.lo > >> CC libpulsecore_0.9.22_la-modargs.lo > >> CC libpulsecore_0.9.22_la-modinfo.lo > >> CC libpulsecore_0.9.22_la-module.lo > >> CC libpulsecore_0.9.22_la-msgobject.lo > >> CC libpulsecore_0.9.22_la-namereg.lo > >> CC libpulsecore_0.9.22_la-object.lo > >> CC libpulsecore_0.9.22_la-play-memblockq.lo > >> CC libpulsecore_0.9.22_la-play-memchunk.lo > >> CC libpulsecore_0.9.22_la-remap.lo > >> CC libpulsecore_0.9.22_la-remap_mmx.lo > >> CC libpulsecore_0.9.22_la-remap_sse.lo > >> CC libpulsecore_0.9.22_la-resampler.lo > >> CC libpulsecore_0.9.22_la-rtpoll.lo > >> CC libpulsecore_0.9.22_la-sample-util.lo > >> CC libpulsecore_0.9.22_la-cpu-arm.lo > >> CC libpulsecore_0.9.22_la-cpu-x86.lo > >> CC libpulsecore_0.9.22_la-svolume_c.lo > >> CC libpulsecore_0.9.22_la-svolume_arm.lo > >> CC libpulsecore_0.9.22_la-svolume_mmx.lo > >> CC libpulsecore_0.9.22_la-svolume_sse.lo > >> CC libpulsecore_0.9.22_la-sconv-s16be.lo > >> CC libpulsecore_0.9.22_la-sconv-s16le.lo > >> CC libpulsecore_0.9.22_la-sconv_sse.lo > >> CC libpulsecore_0.9.22_la-sconv.lo > >> CC libpulsecore_0.9.22_la-shared.lo > >> CC libpulsecore_0.9.22_la-shm.lo > >> CC libpulsecore_0.9.22_la-sink-input.lo > >> CC libpulsecore_0.9.22_la-sink.lo > >> CC libpulsecore_0.9.22_la-sioman.lo > >> CC libpulsecore_0.9.22_la-sound-file-stream.lo > >> In file included from pulsecore/sound-file-stream.c:33: > >> /opt/local/include/sndfile.h:655:5: warning: > >> "ENABLE_SNDFILE_WINDOWS_PROTOTYPES" is not defined > >> CC libpulsecore_0.9.22_la-sound-file.lo > >> In file included from pulsecore/sound-file.c:31: > >> /opt/local/include/sndfile.h:655:5: warning: > >> "ENABLE_SNDFILE_WINDOWS_PROTOTYPES" is not defined > >> CC libpulsecore_0.9.22_la-source-output.lo > >> CC libpulsecore_0.9.22_la-source.lo > >> CC libpulsecore_0.9.22_la-start-child.lo > >> CC libpulsecore_0.9.22_la-thread-mq.lo > >> CC libpulsecore_0.9.22_la-time-smoother.lo > >> CC libpulsecore_0.9.22_la-dbus-shared.lo > >> CC libpulsecore_0.9.22_la-database-simple.lo > >> CC libpulsecore_foreign_la-resample2.lo > >> CCLD libpulsecore-foreign.la > >> CCLD libpulsecore-0.9.22.la > >> CC cli.lo > >> CCLD libcli.la > >> CC protocol-cli.lo > >> CCLD libprotocol-cli.la > >> CC protocol-simple.lo > >> CCLD libprotocol-simple.la > >> CC protocol-http.lo > >> CC mime-type.lo > >> CCLD libprotocol-http.la > >> CC protocol-native.lo > >> CCLD libprotocol-native.la > >> CC protocol-esound.lo > >> CCLD libprotocol-esound.la > >> CC rtp.lo > >> CC sdp.lo > >> CC sap.lo > >> CC rtsp_client.lo > >> CC headerlist.lo > >> CCLD librtp.la > >> CC module_console_kit_la-module-console-kit.lo > >> CCLD module-console-kit.la > >> CC module-cli.lo > >> modules/module-cli.c: In function 'module_cli_LTX_pa__init': > >> modules/module-cli.c:108: error: 'O_CLOEXEC' undeclared (first use in this > >> function) > >> modules/module-cli.c:108: error: (Each undeclared identifier is reported > >> only once > >> modules/module-cli.c:108: error: for each function it appears in.) > >> make[3]: *** [module-cli.lo] Error 1 > >> make[2]: *** [install] Error 2 > >> make[1]: *** [install-recursive] Error 1 > >> make: *** [install] Error 2 > >> > >> On Apr 26, 2011, at 12:23 PM, Cliff Sharp wrote: > >> > >> First Pass: > >> Trying to build spice-0.8.1 and all its dependencies by hand but got stuck > >> on alsa. > >> > >> Second Pass: > >> I was attempting to use jhbuild for spice-0.8.1 > >> I was going through building the dependencies that are not already in a > >> modulesets by hand under the jhbuild shell. > >> My plan was to create a moduleset for spice - but trying to figure out > >> modulesets was too difficult and taking way too much time. > >> I also got stuck on alsa again > >> > >> Third Pass: > >> I decided to switch to spice-gtk. Mainly because it seems to more > >> cross-platform oriented it uses gstreamer > >> Right now I am using MacPorts to download and build as many of the > >> dependencies as I can. > >> Then I will try and build spice-gtk. > >> > >> > >> On Apr 26, 2011, at 10:10 AM, Kai Mosebach wrote: > >> > >> I just triesbuild the OSX gtk client, my findings : > >> > >> 1.) Installed gtk2 and gstreamer via ports > >> 2.) Finally installed current celt051 after some fiddling > >> 3.) Install pyparsing from http://sourceforge.net/projects/pyparsing/ > >> 4.) Install Text-CSV from > >> http://search.cpan.org/~makamaka/Text-CSV-1.21/lib/Text/CSV.pm > >> 5.) export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig > >> 6.) fiddling around with gstreamer/gst/app/*.h + libgstapp > >> => install gst-plugins-base via macports > >> 7.) ./configure --with-audio=gstreamer > >> --without-python --with-coroutine=gthread > >> 8.) touch gtk/sym-file (otherwise libtool complains… Any hints?) > >> 9.) make (failing w/ the error below, ideas?) > >> > >> Best Kai > >> > >> --- SNIP > >> > >> mp01:spice-gtk-0.5 $ make > >> make all-recursive > >> Making all in common > >> Making all in win > >> Making all in my_getopt-1.5 > >> make[4]: Nothing to be done for `all'. > >> make[4]: Nothing to be done for `all-am'. > >> make[3]: Nothing to be done for `all-am'. > >> Making all in gtk > >> make all-am > >> CCLD libspice-client-gtk-2.0.la > >> Undefined symbols: > >> "_spice_inputs_key_press", referenced from: > >> _send_key in spice-widget.o > >> "_spice_inputs_motion", referenced from: > >> _motion_event in spice-widget.o > >> "_spice_main_set_display", referenced from: > >> _recalc_geometry in spice-widget.o > >> "_spice_main_clipboard_grab", referenced from: > >> _clipboard_get_targets in spice-widget.o > >> "_spice_cursor_channel_get_type", referenced from: > >> _channel_destroy in spice-widget.o > >> _channel_destroy in spice-widget.o > >> _channel_new in spice-widget.o > >> _channel_new in spice-widget.o > >> _channel_new in spice-widget.o > >> "_spice_channel_connect", referenced from: > >> _channel_new in spice-widget.o > >> _channel_new in spice-widget.o > >> _channel_new in spice-widget.o > >> "_spice_main_clipboard_release", referenced from: > >> _clipboard_owner_change in spice-widget.o > >> "_spice_util_get_debug", referenced from: > >> _clipboard_clear in spice-widget.o > >> _clipboard_got_from_guest in spice-widget.o > >> _cursor_reset in spice-widget.o > >> _clipboard_received_cb in spice-widget.o > >> _clipboard_received_cb in spice-widget.o > >> _clipboard_get in spice-widget.o > >> _channel_destroy in spice-widget.o > >> _cursor_move in spice-widget.o > >> _clipboard_get_targets in spice-widget.o > >> _clipboard_get_targets in spice-widget.o > >> _clipboard_get_targets in spice-widget.o > >> _spice_display_send_keys in spice-widget.o > >> _recalc_geometry in spice-widget.o > >> _try_keyboard_grab in spice-widget.o > >> _focus_in_event in spice-widget.o > >> _focus_in_event in spice-widget.o > >> _enter_event in spice-widget.o > >> _spice_display_finalize in spice-widget.o > >> _try_keyboard_ungrab in spice-widget.o > >> _focus_out_event in spice-widget.o > >> _leave_event in spice-widget.o > >> _scroll_event in spice-widget.o > >> _scroll_event in spice-widget.o > >> _button_event in spice-widget.o > >> _motion_event in spice-widget.o > >> _expose_event in spice-widget.o > >> _key_event in spice-widget.o > >> _vnc_display_keymap_gdk2xtkbd_table in vncdisplaykeymap.o > >> _vnc_display_keymap_gdk2xtkbd_table in vncdisplaykeymap.o > >> _vnc_display_keymap_gdk2xtkbd_table in vncdisplaykeymap.o > >> _vnc_display_keymap_gdk2xtkbd_table in vncdisplaykeymap.o > >> "_spice_inputs_set_key_locks", referenced from: > >> _sync_keyboard_lock_modifiers in spice-widget.o > >> "_spice_main_channel_get_type", referenced from: > >> _channel_destroy in spice-widget.o > >> _channel_new in spice-widget.o > >> _channel_new in spice-widget.o > >> "_spice_main_clipboard_notify", referenced from: > >> _clipboard_received_cb in spice-widget.o > >> "_spice_session_get_channels", referenced from: > >> _spice_display_new in spice-widget.o > >> "_spice_inputs_key_release", referenced from: > >> _send_key in spice-widget.o > >> "_spice_inputs_channel_get_type", referenced from: > >> _channel_destroy in spice-widget.o > >> _channel_destroy in spice-widget.o > >> _channel_new in spice-widget.o > >> _channel_new in spice-widget.o > >> _channel_new in spice-widget.o > >> "_spice_inputs_position", referenced from: > >> _motion_event in spice-widget.o > >> "_spice_main_clipboard_request", referenced from: > >> _clipboard_get in spice-widget.o > >> "_spice_inputs_button_press", referenced from: > >> _scroll_event in spice-widget.o > >> _button_event in spice-widget.o > >> "_spice_inputs_button_release", referenced from: > >> _scroll_event in spice-widget.o > >> _button_event in spice-widget.o > >> "_spice_display_channel_get_type", referenced from: > >> _channel_destroy in spice-widget.o > >> _channel_destroy in spice-widget.o > >> _channel_new in spice-widget.o > >> _channel_new in spice-widget.o > >> ld: symbol(s) not found > >> collect2: ld returned 1 exit status > >> make[3]: *** [libspice-client-gtk-2.0.la] Error 1 > >> make[2]: *** [all] Error 2 > >> make[1]: *** [all-recursive] Error 1 > >> make: *** [all] Error 2 > >> > >> From: Cliff Sharp <[email protected]> > >> Date: Tue, 26 Apr 2011 07:44:34 -0500 > >> To: Attila Sukosd <[email protected]> > >> Cc: <[email protected]> > >> Subject: Re: [Spice-devel] Spice on OS/X > >> > >> Great suggestion. > >> I have been looking into spice-gtk because it does seem like it would be > >> much less work. > >> > >> Thanks. > >> > >> On Apr 26, 2011, at 3:01 AM, Attila Sukosd wrote: > >> > >> Hi, > >> > >> > >> This might be a stupid question, but why don't you try to use spice-gtk on > >> OS/X instead of spicec ? > >> It has everything needed, such as gtk2/gtk3 and gstreamer for audio, all > >> cross platform. > >> > >> Rgrds, > >> > >> Attila > >> > >> > >> On Mon, Apr 25, 2011 at 11:34 PM, Cliff Sharp <[email protected]>wrote: > >> > >>> When trying to port the alsa-lib to OS/X while porting Spice to OS/X I > >>> am having some difficulties resolving issues with alsa-lib. I am using > >>> alsa-lib-1.0.24.1 > >>> > >>> After doing a ./configure - I have also tried > >>> ./configure --enable-shared=no --enable-static=yes > >>> > >>> Either way I get the following error in the middle --- > >>> ./configure: line 18735: CC_NOUNDEFINED: command not found > >>> > >>> ___________ > >>> > >>> And then the end of the ./configure looks like this --- > >>> > >>> configure: creating ./config.status > >>> config.status: creating Makefile > >>> config.status: creating doc/Makefile > >>> config.status: creating doc/pictures/Makefile > >>> config.status: creating doc/doxygen.cfg > >>> config.status: creating include/Makefile > >>> config.status: creating include/sound/Makefile > >>> config.status: creating src/Versions > >>> config.status: creating src/Makefile > >>> config.status: creating src/control/Makefile > >>> config.status: creating src/mixer/Makefile > >>> config.status: creating src/pcm/Makefile > >>> config.status: creating src/pcm/scopes/Makefile > >>> config.status: creating src/rawmidi/Makefile > >>> config.status: creating src/timer/Makefile > >>> config.status: creating src/hwdep/Makefile > >>> config.status: creating src/seq/Makefile > >>> config.status: creating src/ucm/Makefile > >>> config.status: creating src/compat/Makefile > >>> config.status: creating src/alisp/Makefile > >>> config.status: creating src/conf/Makefile > >>> config.status: creating src/conf/cards/Makefile > >>> config.status: creating src/conf/pcm/Makefile > >>> config.status: creating modules/Makefile > >>> config.status: creating modules/mixer/Makefile > >>> config.status: creating modules/mixer/simple/Makefile > >>> config.status: creating alsalisp/Makefile > >>> config.status: creating aserver/Makefile > >>> config.status: creating test/Makefile > >>> config.status: creating test/lsb/Makefile > >>> config.status: creating utils/Makefile > >>> config.status: creating utils/alsa-lib.spec > >>> config.status: creating utils/alsa.pc > >>> config.status: creating include/config.h > >>> config.status: include/config.h is unchanged > >>> config.status: executing depfiles commands > >>> Creating asoundlib.h... > >>> > >>> Does this look like the ./configure completed successfully??? > >>> > >>> ______________ > >>> > >>> Then as a result of the make I get the following --- > >>> > >>> Making all in doc > >>> Making all in pictures > >>> make[2]: Nothing to be done for `all'. > >>> make[2]: Nothing to be done for `all-am'. > >>> Making all in include > >>> make all-recursive > >>> Making all in sound > >>> make[3]: Nothing to be done for `all'. > >>> Making all in src > >>> Making all in control > >>> CC cards.lo > >>> CC tlv.lo > >>> CC namehint.lo > >>> CC hcontrol.lo > >>> CC control.lo > >>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6097:Expected > >>> comma after segment-name > >>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6101:Expected > >>> comma after segment-name > >>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6101:Rest > >>> of line ignored. 1st junk character valued 32 ( ). > >>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6593:Unknown > >>> pseudo-op: .symver > >>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6593:Rest > >>> of line ignored. 1st junk character valued 95 (_). > >>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6637:Unknown > >>> pseudo-op: .symver > >>> /var/folders/Pv/PvC+gYnqE1aH2WUpUaGMJk+++TI/-Tmp-//cctnQSSU.s:6637:Rest > >>> of line ignored. 1st junk character valued 95 (_). > >>> make[2]: *** [control.lo] Error 1 > >>> make[1]: *** [all-recursive] Error 1 > >>> make: *** [all-recursive] Error 1 > >>> > >>> I haven't been able to quite figure out what is going with the make > >>> errors. > >>> I would appreciate it if someone would be able to give me some hints. > >>> > >>> Thanks > >>> > >>> ____ > >>> > >>> > >>> > >>> > >>> > >>> _______________________________________________ > >>> Spice-devel mailing list > >>> [email protected] > >>> http://lists.freedesktop.org/mailman/listinfo/spice-devel > >>> > >>> > >> > >> _______________________________________________ Spice-devel mailing list > >> [email protected] > >> http://lists.freedesktop.org/mailman/listinfo/spice-devel > >> > >> > >> > >> ____ > >> > >> <PastedGraphic-2.tiff> > >> > >> > >> > >> ____ > >> > >> > >> > > > diff --git a/common/lines.c b/common/lines.c > index 1a14c18..59d0689 100644 > --- a/common/lines.c > +++ b/common/lines.c > @@ -2985,7 +2985,7 @@ miWideDashSegment (GCPtr pGC, > double L, l; > double k; > PolyVertexRec vertices[4]; > - PolyVertexRec saveRight = { 0 }, saveBottom; > + PolyVertexRec saveRight = { 0 }, saveBottom = { 0 }; > PolySlopeRec slopes[4]; > PolyEdgeRec left[2], right[2]; > LineFaceRec lcapFace, rcapFace; > diff --git a/gtk/Makefile.am b/gtk/Makefile.am > index 7ce8a65..e5f3c1c 100644 > --- a/gtk/Makefile.am > +++ b/gtk/Makefile.am > @@ -27,6 +27,7 @@ if HAVE_LD_VERSION_SCRIPT > VERSION_LDFLAGS = -Wl,--version-script=${srcdir}/map-file > else > VERSION_LDFLAGS = -export-symbols ${srcdir}/sym-file > +#VERSION_LDFLAGS = > endif > > KEYMAP_GEN = $(srcdir)/keymap-gen.pl > @@ -420,7 +421,6 @@ INTROSPECTION_GIRS = > INTROSPECTION_SCANNER_ARGS = --add-include-path=$(builddir) $(PREFIX_ARGS) > INTROSPECTION_COMPILER_ARGS = --includedir=$(builddir) > > -if HAVE_INTROSPECTION > glib_introspection_files = $(libspice_client_glibinclude_HEADERS) > gtk_introspection_files = $(libspice_client_gtkinclude_HEADERS) > > @@ -453,7 +453,6 @@ typelibsdir = $(libdir)/girepository-1.0 > typelibs_DATA = $(INTROSPECTION_GIRS:.gir=.typelib) > > CLEANFILES += $(gir_DATA) $(typelibs_DATA) > -endif > > update-map-file: > ( echo "SPICEGTK_1 {" ; \ > diff --git a/gtk/continuation.c b/gtk/continuation.c > index 4f5b027..3aefa54 100644 > --- a/gtk/continuation.c > +++ b/gtk/continuation.c > @@ -21,7 +21,10 @@ > #include <config.h> > > #include "continuation.h" > - > +#ifdef __MACH__ > +#define _XOPEN_SOURCE > +#include <ucontext.h> > +#endif > /* > * va_args to makecontext() must be type 'int', so passing > * the pointer we need may require several int args. This > diff --git a/gtk/continuation.h b/gtk/continuation.h > index 585788e..6822757 100644 > --- a/gtk/continuation.h > +++ b/gtk/continuation.h > @@ -21,7 +21,8 @@ > #ifndef _CONTINUATION_H_ > #define _CONTINUATION_H_ > > -#include <ucontext.h> > +#include <string.h> > +#include <sys/ucontext.h> > > struct continuation > { > diff --git a/gtk/coroutine_ucontext.c b/gtk/coroutine_ucontext.c > index 91059ad..ee48249 100644 > --- a/gtk/coroutine_ucontext.c > +++ b/gtk/coroutine_ucontext.c > @@ -25,6 +25,9 @@ > #include <stdio.h> > #include <stdlib.h> > #include "coroutine.h" > +#ifndef MAP_ANONYMOUS > +# define MAP_ANONYMOUS MAP_ANON > +#endif > > int coroutine_release(struct coroutine *co) > { > diff --git a/gtk/spice-client-gtk.override b/gtk/spice-client-gtk.override > index 7b3543a..e634f78 100644 > --- a/gtk/spice-client-gtk.override > +++ b/gtk/spice-client-gtk.override > @@ -1,6 +1,7 @@ > %% > headers > #include <Python.h> > +#define NO_IMPORT_PYGOBJECT > #include "pygobject.h" > #include "spice-common.h" > #include "spice-widget.h" > _______________________________________________ > Spice-devel mailing list > [email protected] > http://lists.freedesktop.org/mailman/listinfo/spice-devel _______________________________________________ Spice-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/spice-devel
