John asked: ...does anyone know the size of the nut holding on the wheel? I will be fixing a frayed wire in mine this week also (the horn blew every time I turned a corner!)...
I don't know what size it is, but it is big - over the 1" that most peoples socket sets go up to. But it's not as much as 1 3/16", otherwise I'd be able to jam a 30mm socket on. So the chances are it's 1 1/8", although possibly 1 1/16". I must admit that I have always just clamped my Mole grips across the nut and then used a screwdriver through the jaws to give me extra leverage! I know what you mean about frayed horn wires - the MG BGT that preceded Daffy developed the same problem when I installed a Mountney wheel (not very well). Rather embarrassing!! Richard & Daffy ---------------------------------------------------------------------- Important Notice: The information in this email is confidential and may be legally-privileged. If you have reason to believe you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it is prohibited and may be unlawful and you are requested to contact the sender urgently and dispose of this email -----------------------------------------------------------exp. /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
