OK...so there has been quite a bit of question about miscelaneous parts i have for my '68 Spitfire. I checked the block number nad the commision number. They both match the numbers for a MK3 Spitfire. The water pump i have is from a '70s Spit and i have a plethora of 1500 parts. Now...as i am piecing together the rest of my car i am beginning to question the head that i have for it. The head was still on the block itslef but not bolted down and i was missing a few head studs. Now here is my reason for questioning. Every pitcure i have seen and every manual i have checked, there is a hole in the head for the water hose to take water to or from the heater. The head i have does not have this hole in it. I checked the Bentley "Official Triumph Spitfire MkIII, MKIV & 1500" manual and it sasy that the hose from the head to the water valve is not used in the USA and Sweden models. Instead, it says that there is a hose from the manifold to the water valve? I am confused. I took some more pictures of the engine numbers and will be posting them on my website soon. I know i have a long way to go before i am even to a point where i need to consider the heater...but it would be good to know what i have and don't have and what i need. Any thoughts would be greatly appreciated. Thanks in advance, Dave '68 Spit
__________________________________________________________________ Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/ /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
