Ok, here is a question for all the experienced restorers who have used Feather Fill high build primer, to straighten out the sanding marks, etc before repainting...
After careful application of self etching primer to the entirety of the exterior, I went today to put a test coat of "Feather Fill" on the car, in order to find out how to spray it well. Reading the directions for the first time, I discovered the following line- "Do not use over self-etching primers" At which point the frustration bell went off, seeing how the whole area needing the Feather Fill is already covered with self etch primer! So my question is, should I just return the can to the place of purchase, and give up, or can I simply lay a coating of regular primer over the self etching, and then apply the Feather Fill? I really wanted to do the Feather Fill stuff, to smooth out some areas a little better, as I am no great bodyman. (Give me a mechanical problem ANY day! Any help greatly appreciated, Scott /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
