Hi Tim, There are 2 nuts that hold the rubber conical bonnet stops - 1 of which is inside a bracket that is attached to the bonnet. The nut is stopped from moving by the bracket. The problem is that when I went undo the rubber cone/bolt assembly - the nut's edges disintegrated - and the whole think has basially got stuck together - so it now just spins around in the bracket. I'm going to have to saw off the bolt - and then push the bolt and the nut (that is stuck) - up and out of the bracket - but there is no way of opening up the bracket that I can see on my car without brute force.
Mike mentioned that he found there was a metal flap that he just levered open with a screwdriver. But mine doesnt have a flap. I hope that explains it. James 1977 Pimento Red Spit /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
