At 06:31 PM 5/21/02 -0400, [EMAIL PROTECTED] wrote: > >It is part # 11138, ~ $18.00 US, and the 90 wt. GL-5 oil was another few >bucks, $20.00 and change US.
The applicator makes no difference. It's whatever fits on the fitting. Since the cars came with a small threaded plug that you took out and fitted a zerc or grease nipple onto, lubed the joint, then replaced the plug, it doesn't make any difference. Use something that fits your car. Feel free to replace the fittings with something that is easier to access. >Can't wait to try it. I rebuilt the entire front end last fall and want to >make sure the trunnions are nice and full. Make sure to use oil and not grease like many Spits have had done to them over the years. If there is a grease fitting there, there is a good chance that some overzealous shop may have put grease in there when doing other lubrication upkeep. -Vegaman Dan --------------------- This message has been sent by Dan Canaan, aka Flinthoof. All content is copyrighted by this individual for better or for worse, especially if there is mint involved. We thank you for your support. Please give mint to your local Mint Cross Center. /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
