Check out this site http://www.triumphspitfire.com/wiring.html It has a wiring diagram for a 75, 76 & 78 spitfire but the ignition switch is basicaly the same in the GT6, it will show you where everything goes. It is one of the easyest to understand that I've found. Tom O'Malley did a great job on these. Good luck.
Tod Jones Harrisonburg Va 67 Spit Mk II > It's time to put the steering column back in, and I can't sort out what > goes where, ignition switch-wise. The Bentley says this: > > white/red to terminal 1 > brown to terminal 2 > white to terminal 3 > white/pink to terminal 5 > > Wish it were that simple! First of all, my switch also has a terminal 4 > and a terminal 6. OK, maybe they're unused. Wish the book would say! > > But more important, I have six wires and seven spade connectors to sort > out. They are: > > white, heavy gauge > white, 2 wires sharing one connector > brown, with two connectors- one at the end, another about 2" upstream > white/red > white/pink > brown/red > > Can anyone tell me which "white" the Bentley means goes to terminal 3, > and what the heck does the brown/red one go? > > thanks a lot! > -- > Douglas Frank Compaq Computer Corp. > ZKO 110 Spit Brook Rd. The older I get, > 603-884-0501 Nashua, NH USA 03062 the better I was. /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
