Jeff- When you take it apart, you may not find a number. However, a good locksmith shop should be able to look at it and make a key that will fit the tumbler without much difficulty. Turns out there's only about 5 posible "standard" positions for each pin in the tumbler and a good shop should have a machine that he can set the position for each pin and cut a key.
I did this about two years ago in Heuber Heights, Ohio (just outside of Dayton). The locksmith spent about 5 minutes and I had two keys that were a perfect fit. Total cost: ~$12.00. Chris -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jeff Gruber Sent: Sunday, July 28, 2002 12:00 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: boot lock options I received a number of helpful suggestions on what to do about my keyless boot lock. They were: 1) buy a new one 2) buy a used one 3) take it to a locksmith 4) take it apart and find the numbers that will allow someone to make you a key I'm going to try these in the reverse order of listing. I'll let you know which one works out. Thanks for all the help. British cars and the internet: an unbeatable combination. Jeff Gruber /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
