Hi Listers,
Ive been playing around with my float chambers - opened the top of them - took the float off - took the valve out etc I replaced the right hand side valve (brass bit and plastic bit) - because I happened to have a replacement for it. I also found that the gasket on the right hand side was a very thin piece of plastic - where as the other side was a thick rubbery one. Now to me that means that the float is higher up - so Im guessing that wasnt good - however surely I must had adjusted this when I tuned them. Not sure on that one. So now its all back together - but fuel is gushing out of the fuel overflow hose - I can only think that something is wrong with the left hand float/valve. Ive taken it apart again - but still its doing this. Any ideas? James /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
